Statistics
| Branch: | Revision:

root / CAD @ master

Name Size Revision Age Author Comment
  3D Print
  Accessory Development
  Archive a4bfa38b 8 months Dan Shope Re-organized CAD. Archived old diagnostic stati...
  Autonomous Charging Station
  Cambam 2046891e 11 months Dan Shope Uploading CAD folders from 'old' repository
  Edrawings a9a82abe 8 months Dan Shope Separated Rev4 CAD models into dedicated direct...
  Electronics 2046891e 11 months Dan Shope Uploading CAD folders from 'old' repository
  Mold Boxes
  Overo Air
  Overo Earth
  Remote 2046891e 11 months Dan Shope Uploading CAD folders from 'old' repository
  Storage & Diagnostic Station
  rev4 a9a82abe 8 months Dan Shope Separated Rev4 CAD models into dedicated direct...
ACTUATORS, 298-1 Motor.SLDPRT 234.5 KB
ACTUATORS, DRIVETRAIN, TOP ASSY.SLDASM 492.5 KB
ACTUATORS, Pololu Extended Micro Metal Bracket.SLDPRT 459 KB
ACTUATORS, Pololu Wheel, 49x19.SLDPRT 1.2 MB
ACTUATORS, STEPPER PF35T-48.SLDPRT 217 KB
ACTUATORS, STEPPER, THREADED STANDOFF.SLDPRT 164.5 KB
ACTUATORS, STEPPER, TOP ASSY.SLDASM 221.5 KB
ACTUATORS, TowerPro SG90 Micro Servo.SLDPRT 507.5 KB
ACUATORS, STEPPER, HOMING SWITCH, 6MM TACTILE.SLDPRT 311 KB
ACUATORS, STEPPER, SHAFT, SONAR MOUNT.SLDPRT 146.5 KB
ACUATORS, STEPPER, SHAFT, SONAR.SLDPRT 136 KB
ANT-2.jpg 70 KB 3a065f44 11 months Dan Shope Added SCOUT CAD files
BATTERY, 3000mAh 7.4V LiIon Pack.SLDPRT 172 KB
BATTERY, 4000mAh 7.4V LiIon Pack.SLDPRT 220 KB
BATTERY, SWITCH, CH865-ND.SLDPRT 258.5 KB
BATTERY, UR18650E.SLDPRT 289 KB
BLOCK, BOM.SLDBLK 94 KB
BLOCK, FFC Passthrough.SLDBLK 56 KB
BLOCK, Rear Diamond Plate.SLDBLK 77.5 KB
BLOCK, Side Brushed Metal.SLDBLK 54 KB
BLOCK, Side Vents.SLDBLK 64 KB
BLOCK, Wheel Well Cover.SLDBLK 57.5 KB
BLOCK, Wiring Passthrough.SLDBLK 67 KB
BUMPER, COPPER CONTACT.SLDPRT 178 KB
BUMPER, FRONT SWITCHED.SLDPRT 250.5 KB
BUMPER, SWITCH, 5MM MOMENTARY, P8079SCT.SLDPRT 126 KB
CHASSIS, BUSHING, MMC, 3746K3.SLDPRT 188 KB
CHASSIS, HOOD, HEADLIGHT, LEFT.SLDPRT 412 KB
CHASSIS, HOOD, UNIBODY.SLDPRT 1.9 MB
CHASSIS, HOOD, USER BUTTONS, JOINED.SLDPRT 534 KB
CHASSIS, PIVOT, 6655k13 Thrust Washers.SLDPRT 536 KB
CHASSIS, PIVOT, 90499A029 NUT.SLDPRT 240 KB
CHASSIS, PIVOT, LOCK PLATE.SLDPRT 218.5 KB
CHASSIS, PIVOT, RUBBER PASSTHROUGH.SLDPRT 163 KB
CHASSIS, PLATE, REAR UNIBODY COVER.SLDPRT 2 MB
CHASSIS, SIGNPOST.SLDPRT 248.5 KB
CHASSIS, UNIBODY, FRONT REDESIGN TEST.SLDPRT 648 KB
CHASSIS, UNIBODY, FRONT, LEFT WALL, MIRROR.SLDPRT 678 KB
CHASSIS, UNIBODY, FRONT, LEFT WALL.SLDPRT 1.9 MB
CHASSIS, UNIBODY, FRONT.SLDPRT 2.9 MB
CHASSIS, UNIBODY, REAR, DIAMOND PLATE.SLDPRT 165 KB
CHASSIS, UNIBODY, REAR.SLDPRT 3.3 MB
CONNECTOR, CGRID DOUBLE.SLDPRT 218.5 KB
CONNECTOR, CGRID SINGLE.SLDPRT 330.5 KB
CONNECTOR, FFC 545482071.SLDPRT 1.5 MB
CONNECTOR, JST B2B-ZR-SM4.SLDPRT 183.5 KB
CONNECTOR, JST B3B-ZR-SM4.SLDPRT 199 KB
CONNECTOR, JST B4B-ZR-SM4.SLDPRT 213 KB
CONNECTOR, JST B5B-ZR-SM4.SLDPRT 218.5 KB
CONNECTOR, JST B6B-ZR-SM4.SLDPRT 241 KB
CONNECTOR, JST S6B-ZR-SM4A.SLDPRT 248 KB
CONNECTOR, MOLEX 015445810.SLDPRT 542.5 KB
DRAWING, Accessory Port.SLDDRW 223 KB
DRAWING, BOM, Interference Test.SLDDRW 100 KB
DRAWING, Life Size.SLDDRW 619.5 KB
DRAWING, POLYJET REFERENCE.SLDDRW 176.5 KB
DRAWING, VinylCutouts.SLDDRW 275 KB
FASTENER, 1'4-20 NUT, NYLON INSERT, 90640A129.SLDPRT 815.5 KB
FASTENER, 1'4-20 NUT, NYLON INSERT, THIN, 90566A029.SLDPRT 736.5 KB
FASTENER, 1'4-20 SHCS, 1'5IN, 91251A546.SLDPRT 808 KB
FASTENER, 2-56 SHCS, 0'5IN, 91251A081.SLDPRT 1.1 MB
FASTENER, 2-56 SHCS, 0'625IN, 92196A083.SLDPRT 1.1 MB
FASTENER, 4-40 NUT, 90480A005.SLDPRT 141.5 KB
FASTENER, 4-40 PAN HEAD, 0'375IN 90272A108.SLDPRT 576.5 KB
FASTENER, 4-40 SHCS, 0'25IN, 91251A106.SLDPRT 453 KB
FASTENER, 4-40 SHCS, 0'5IN, 91251A110.SLDPRT 612.5 KB
FASTENER, 4-40 THREAD FORMING, PHILIPS DRIVE, 93878A108.SLDPRT 609.5 KB
FASTENER, 4-40 THREAD FORMING, PHILIPS, 0'25IN, 93878A106.SLDPRT 575.5 KB
FASTENER, 4-40 THREAD FORMING, PHILIPS, 0'375IN, 93878A108.SLDPRT 610 KB
GROUND.SLDPRT 462.5 KB 3a065f44 11 months Dan Shope Added SCOUT CAD files
LED, RGB Orb.SLDPRT 194.5 KB
PCB, BREAKFLY, TOP ASSY.SLDASM 931 KB
PCB, Breakfly.SLDPRT 387.5 KB
PCB, ENCODER, POLOLU.SLDPRT 358 KB
PCB, SCOUTFLY, FFC.SLDPRT 403.5 KB
PCB, SCOUTFLY, TOP ASSY.SLDASM 2.3 MB
PCB, SCOUTFLY.SLDPRT 216.5 KB
PCB, SWITCH, 6MM SMT.SLDPRT 202.5 KB
REFERENCE, ACCESSORY SURFACES.SLDPRT 1.4 MB
RENDER, CHAIR.SLDPRT 465 KB
RENDER, DESK.SLDPRT 365.5 KB
RENDER, KEYBOARD.SLDPRT 5.5 MB
RENDER, SCOUT UNIBODY SCALE.SLDASM 4.8 MB
ROCK.SLDPRT 350.5 KB 3a065f44 11 months Dan Shope Added SCOUT CAD files
SCOUT, UNIBODY, TOP ASSY.SLDASM 5.7 MB
SENSOR, BOM, VISHAY TSOP4838.SLDPRT 304 KB
SENSOR, BOM,TSAL6200.SLDPRT 236 KB
SENSOR, CLIFF, GP2Y0D810.SLDPRT 280.5 KB
SENSOR, SONAR, COVER.SLDPRT 535 KB
SENSOR, SONAR, MOUNTING BLOCK.SLDPRT 157 KB
SENSOR, SONAR, Maxbotix EZ4.SLDPRT 301 KB
SENSOR, SONAR, TOP ASSY.SLDASM 280 KB
SPEAKER, 36MM OD, PSR-36N08A-JQ.SLDPRT 297.5 KB
TEST, CHASSIS, UNIBODY, FRONT, LEFT WALL - Copy.SLDPRT 1.7 MB
gumstix.jpg 34.2 KB 3a065f44 11 months Dan Shope Added SCOUT CAD files

Latest revisions

# Date Author Comment
262e2e4b 02/14/2012 10:46 am Dan Shope

Updated master mold boxes and supports, master models for casting.
1eab712a 11/07/2011 03:07 pm Dan Shope

Added speaker to front chassis. Modeled Microkopter quadrotor and foam guard assembly for use in quadrotor wagon accessory.
f88e5dea 10/23/2011 12:47 am Dan Shope

Updated EZ4 Sonar model with correct dimensions. Updated sonar mounting block for 3D printing. Added 3D print profiles for new parts.
fd69f43f 10/22/2011 03:59 pm Dan Shope

Updated 3D print files.
247821b9 10/22/2011 03:50 pm Dan Shope

Added locating features with mounting bosses to front chassis for accessories.
ba5424d7 10/22/2011 03:15 pm Dan Shope

Added locking feature to front sidewalls for tigher assembled fit. Cleaned up bottom mating edge with front chassis.
b19958dc 10/19/2011 08:48 pm Dan Shope

Added hood latch. Updated rear cover.
781890a0 10/19/2011 02:03 pm Dan Shope

Updated website structure, navigation, and graphics.
bc5f1122 10/15/2011 12:37 pm Dan Shope

Added mounting bosses for rear cliff sensors
8153d9cc 10/15/2011 12:25 pm Dan Shope

Completed mechanical backlog on new rear chassis. Added renders from latest design.

View revisions

Also available in: Atom