Colony

/**

 * Copyright (c) 2007 Colony Project

 *

 * Permission is hereby granted, free of charge, to any person

 * obtaining a copy of this software and associated documentation

 * files (the "Software"), to deal in the Software without

 * restriction, including without limitation the rights to use,

 * copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the

 * Software is furnished to do so, subject to the following

 * conditions:

 *

 * The above copyright notice and this permission notice shall be

 * included in all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 * OTHER DEALINGS IN THE SOFTWARE.

 **/

/**

 * @file serial.c

 * @brief Serial Input and Output

 *

 * Implementation of functions for serial input and output.

 *

 * @author Colony Project, CMU Robotics Club

 **/

#include <avr/io.h>

#include <stdio.h>

#include "serial.h"

FILE *usb_fd;  //For use with fprintf() and related stdio functions

FILE *xbee_fd;  //For use with fprintf() and related stdio functions

/**

 * Initializes communication over the USB serial port.

 * This must be called before any other usb function

 * may be used.

 **/

void usb_init() {

  //Set baud rate

  // - 115200 (both wired and wireless) is UBRR=8, U2X=1

  // - 9600 is U2X =1, UBRR = 107.

#if (USB_BAUD == 115200)

  UBRR0H = 0x00;

  UBRR0L = 8;

  UCSR0A |= _BV(U2X0);

#elif (USB_BAUD == 9600)

  UBRR0H = 0x00;

  UBRR0L = 103;

  UCSR0A |= _BV(U2X0);

#else //Baud rate is defined in the header file, we should not get here

  return;

#endif

  /*Enable receiver and transmitter */

  UCSR0B |= (1<<RXEN0)|(1<<TXEN0);

  /* Set frame format: 8data, 1stop bit, asynchronous normal mode */

  UCSR0C |= (1<<UCSZ00) | (1<<UCSZ01);

  // if we have enabled the stdio stuff, then we init it here

#ifdef USE_STDIO

  /* Open the stdio stream corresponding to this port */

  usb_fd = fdevopen(usb_putc, usb_getc);

#endif

}

/**

 * Initializes communication over the XBee.

 * This must be called before any other xbee function

 * may be used.

 **/

void xbee_init() {

  //Set baud rate

  // - 115200 (both wired and wireless) is UBRR=8, U2X=1

  // - 9600 is U2X =1, UBRR = 107.

#if (XBEE_BAUD == 115200)

  UBRR1H = 0x00;

  UBRR1L = 8;

  UCSR1A |= _BV(U2X1);

#elif (XBEE_BAUD == 9600)

  UBRR1H = 0x00;

  UBRR1L = 103;

  UCSR1A |= _BV(U2X1);

#else //Baud rate is defined in the header file, we should not get here

  return;

#endif

  //Enable receiver and transmitter

  UCSR1B |= (1<<RXEN1)|(1<<TXEN1);

  // Set frame format: 8data, 1stop bit, asynchronous normal mode

  UCSR1C |= (1<<UCSZ10) | (1<<UCSZ11);

  // if we have enabled the stdio stuff, then we init it here

#ifdef USE_STDIO

  /* Open the stdio stream corresponding to this port */

  xbee_fd = fdevopen(xbee_putc, xbee_getc);

#endif

}

/**

 * Sends a character over USB.

 *

 * @param c the character to send

 * @return 0 for success, nonzero for failure

 **/

int usb_putc(char c) {

  // Wait until buffer is clear for sending

  loop_until_bit_is_set(UCSR0A, UDRE0);

  // Load buffer with your character

  UDR0 = c;

  return 0;

}

/**

 * Sends a character to the XBee.

 *

 * @param c the character to send

 * @return 0 for success, nonzero for failure

 **/

int xbee_putc(char c) {

  // Wait until buffer is clear for sending

  loop_until_bit_is_set(UCSR1A, UDRE1);

  // Load buffer with your character

  UDR1 = c;

  return 0;

}

/**

 * Sends a sequence of characters over USB.

 *

 * @param s the string to send

 * @return 0 for success, nonzero for failure

 **/

int usb_puts(char *s) {

  char *t = s;

  while (*t != 0) {

    usb_putc(*t);

    t++;

  }

  return 0;

}

/**

 * Returns the first character in the buffer received from USB.

 * This function blocks execution until a character has been received.

 * xbee_init must be called before this function may be used.

 *

 * @return the first character in the usb buffer

 *

 * @see usb_init, usb_getc_nb

 **/

int usb_getc(void) {

  // Wait for the receive buffer to be filled

  loop_until_bit_is_set(UCSR0A, RXC0);

  // Read the receive buffer

  return UDR0;

}

/**

 * Returns the first character in the buffer received from USB.

 * This function blocks execution until a character has been

 * received. xbee_init must be called before this function

 * may be used.

 *

 * @return the first character in the xbee buffer

 *

 * @see xbee_init, xbee_getc_nb

 **/

int xbee_getc(void) {

  // Wait for the receive buffer to be filled

  loop_until_bit_is_set(UCSR1A, RXC1);

  // Read the receive buffer

  return UDR1;

}

/**

 * Non blocking version of usb_getc. If a character is present in the buffer,

 * it is returned, otherwise -1 is returned immediately. usb_init must be

 * called before this function can be used.

 *

 * @param c the received character. This will be set if a character has

 * been received.

 *

 * @return -1 if no character is available, 0 otherwise

 *

 * @see usb_init, usb_getc

 **/

int usb_getc_nb(char *c) {

  // check if the receive buffer is filled

  if (UCSR0A & _BV(RXC0)) {

    // Read the receive buffer

    (*c) = UDR0;

    return 0;

  } else {

    // Return empty

    return -1;

  }

}

/**

 * Non blocking version of xbee_getc. If a character is present in the buffer,

 * it is returned, otherwise -1 is returned immediately. xbee_init

 * must be called before this function can be used.

 *

 * @param c the received character. This will be set if a character has

 * been received.

 *

 * @return -1 if no character is available, 0 otherwise

 *

 * @see xbee_init, xbee_getc

 **/

int xbee_getc_nb(char *c) {

  // check if the receive buffer is filled

  if (UCSR1A & _BV(RXC1)) {

    // Read the receive buffer

    (*c) = UDR1;

    return 0;

  } else {

    // Return empty

    return -1;

  }

}

/*

  prints an int to serial

  code adapted from Chris Efstathiou's code (hendrix@otenet.gr)

  uses usb_putc

*/

/**

 * Prints an integer, converted to ASCII, to usb. usb_init must be called

 * before this function can be used.

 *

 * @param value the integer to print

 *

 * @return 0 if successful, nonzero otherwise

 *

 * @see usb_init, usb_putc

 **/

int usb_puti(int value ) {

  unsigned char usb_data[6]={'0','0','0','0','0','0' }, position=sizeof(usb_data), radix=10;

  /* convert int to ascii  */

  if(value<0) {

    usb_putc('-');

    value=-value;

  }

  do {

    position--;

    *(usb_data+position)=(value%radix)+'0';

    value/=radix;

  } while(value);

  /* start displaying the number */

  for(;position<=(sizeof(usb_data)-1);position++) {

    usb_putc(usb_data[position]);

  }

  return 0;

}