Colony

############################

### Update this Section ####

############################

COLONYROOT = ../../../..

# Target file name (without extension).

TARGET = libwireless

############################

CDEFS =

# MCU name

MCU = atmega128

# Processor frequency.

#     This will define a symbol, F_CPU, in all source code files equal to the

#     processor frequency. You can then use this symbol in your source code to

#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

#     automatically to create a 32-bit value in your source code.

F_CPU = 16000000

# Output format. (can be srec, ihex, binary)

FORMAT = ihex

# List C source files here. (C dependencies are automatically generated.)

SRC = $(wildcard *.c)

# List Assembler source files here.

#     Make them always end in a capital .S.  Files ending in a lowercase .s

#     will not be considered source files but generated files (assembler

#     output from the compiler), and will be deleted upon "make clean"!

#     Even though the DOS/Win* filesystem matches both .s and .S the same,

#     it will preserve the spelling of the filenames, and gcc itself does

#     care about how the name is spelled on its command-line.

ASRC =

# Optimization level, can be [0, 1, 2, 3, s].

#     0 = turn off optimization. s = optimize for size.

#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

OPT = s

# Debugging format.

#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

#     AVR Studio 4.10 requires dwarf-2.

#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

DEBUG =

# dwarf-2

# List any extra directories to look for include files here.

#     Each directory must be seperated by a space.

#     Use forward slashes for directory separators.

#     For a directory that has spaces, enclose it in quotes.

EXTRAINCDIRS =

# Compiler flag to set the C Standard level.

#     c89   = "ANSI" C

#     gnu89 = c89 plus GCC extensions

#     c99   = ISO C99 standard (not yet fully implemented)

#     gnu99 = c99 plus GCC extensions

CSTANDARD = -std=gnu99

# Place -D or -U options here

CDEFS += -DF_CPU=$(F_CPU)UL

CDEFS += -DROBOT

# Place -I options here

CINCS = -I$(COLONYROOT)/code/lib/include/libdragonfly

CINCS += -L$(COLONYROOT)/code/lib/bin

CBBINCS = -I$(COLONYROOT)/code/projects/libbayboard

CBBINCS += -L$(COLONYROOT)/code/projects/libbayboard

#---------------- Compiler Options ----------------

#  -g*:          generate debugging information

#  -O*:          optimization level

#  -f...:        tuning, see GCC manual and avr-libc documentation

#  -Wall...:     warning level

#  -Wa,...:      tell GCC to pass this to the assembler.

#    -adhlns...: create assembler listing

CFLAGS =

#CFLAGS += -g$(DEBUG)

CFLAGS += $(CDEFS)

CFLAGS += -O$(OPT)

CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums

CFLAGS += -Wall -Wstrict-prototypes

CFLAGS += -Wa,-adhlns=$(<:.c=.lst)

CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

CFLAGS += $(CSTANDARD)

#---------------- Library Options ----------------

# Minimalistic printf version

PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

# Floating point printf version (requires MATH_LIB = -lm below)

PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

# If this is left blank, then it will use the Standard printf version.

PRINTF_LIB =

#PRINTF_LIB = $(PRINTF_LIB_MIN)

#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

# Minimalistic scanf version

SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

# If this is left blank, then it will use the Standard scanf version.

SCANF_LIB =

#SCANF_LIB = $(SCANF_LIB_MIN)

#SCANF_LIB = $(SCANF_LIB_FLOAT)

MATH_LIB = -lm

#============================================================================

# Define programs and commands.

SHELL = sh

CC = avr-gcc

AR = avr-ar

OBJCOPY = avr-objcopy

OBJDUMP = avr-objdump

SIZE = avr-size

NM = avr-nm

AVRDUDE = avrdude

REMOVE = rm -f

REMOVEDIR = rm -rf

COPY = cp

DOXYGEN = doxygen

WINSHELL = cmd

# Define Messages

# English

MSG_ERRORS_NONE = Errors: none

MSG_BEGIN = -------- begin --------

MSG_END = --------  end  --------

MSG_COMPILING = Compiling:

MSG_CLEANING = Cleaning project:

# Define all object files.

OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)

OBJBB = $(SRC:.c=.obb) $(ASRC:.S=.obb)

# Define all listing files.

LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)

# Compiler flags to generate dependency files.

GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d

# Combine all necessary flags and optional flags.

# Add target processor to flags.

ALL_CFLAGS = -mmcu=atmega128 -I. $(CFLAGS) $(CINCS) -Wall $(GENDEPFLAGS)

ALL_BBCFLAGS = -DBAYBOARD -DROBOT -mmcu=atmega164p -I. $(CFLAGS) $(CBBINCS) -Wall $(GENDEPFLAGS)

ALL_ASFLAGS = rcs

# Default target.

all: bayboard

bayboard: begin buildbayboard end

dist: all publish

publish:

	$(COPY) $(TARGET).a $(COLONYROOT)/code/lib/bin

	$(COPY) *.c $(COLONYROOT)/code/lib/src/$(TARGET)

	$(COPY) *.h $(COLONYROOT)/code/lib/include/$(TARGET)

docs:

	$(DOXYGEN)

	$(COPY) docs/html/* $(COLONYROOT)/docs/$(TARGET)

build: $(OBJ)

	$(AR) $(ALL_ASFLAGS) $(TARGET).a $(OBJ)

buildbayboard: $(OBJBB)

	$(AR) $(ALL_ASFLAGS) $(TARGET).a $(OBJBB)

computer:

	gcc *.c -Wall -g -I. -c

	ar rcs $(TARGET).a $(OBJ)

colonet:

	g++ -Wall -Wshadow -Wextra *.c -g -I. -c

	ar rcs $(TARGET).a $(OBJ)

# Eye candy.

# AVR Studio 3.x does not check make's exit code but relies on

# the following magic strings to be generated by the compile job.

begin:

	@echo

	@echo $(MSG_BEGIN)

end:

	@echo $(MSG_END)

	@echo

# Compile: create object files from C source files.

%.o : %.c

	@echo

	@echo $(MSG_COMPILING) $<

	$(CC) -c $(ALL_CFLAGS) $< -o $@

%.obb : %.c

	@echo

	@echo $(MSG_COMPILING) $<

	$(CC) -c $(ALL_BBCFLAGS) $< -o $@

# Target: clean project.

clean: begin clean_list end

clean_list :

	@echo

	@echo $(MSG_CLEANING)

	$(REMOVE) $(TARGET).a

	$(REMOVE) $(OBJ)

	$(REMOVE) $(OBJBB)

	$(REMOVE) $(LST)

	$(REMOVE) $(SRC:.c=.s)

	$(REMOVE) $(SRC:.c=.d)

	$(REMOVE) -r docs

	$(REMOVEDIR) .dep

# Include the dependency files.

-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)