root / trunk / code / Makefile @ 1568
History | View | Annotate | Download (14.9 KB)
1 |
# This is the root makefile |
---|---|
2 |
# |
3 |
# Make global makefile changes here |
4 |
# |
5 |
################################### |
6 |
|
7 |
# Relative path to the root directory (containing lib directory) |
8 |
ifndef COLONYROOT |
9 |
COLONYROOT := .. |
10 |
else |
11 |
COLONYROOT := ../$(COLONYROOT) |
12 |
endif |
13 |
|
14 |
# Hey Emacs, this is a -*- makefile -*- |
15 |
#---------------------------------------------------------------------------- |
16 |
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al. |
17 |
# |
18 |
# Released to the Public Domain |
19 |
# |
20 |
# Additional material for this makefile was written by: |
21 |
# Peter Fleury |
22 |
# Tim Henigan |
23 |
# Colin O'Flynn |
24 |
# Reiner Patommel |
25 |
# Markus Pfaff |
26 |
# Sander Pool |
27 |
# Frederik Rouleau |
28 |
# |
29 |
#---------------------------------------------------------------------------- |
30 |
# On command line: |
31 |
# |
32 |
# make all = Make software. |
33 |
# |
34 |
# make clean = Clean out built project files. |
35 |
# |
36 |
# make coff = Convert ELF to AVR COFF. |
37 |
# |
38 |
# make extcoff = Convert ELF to AVR Extended COFF. |
39 |
# |
40 |
# make program = Download the hex file to the device, using avrdude. |
41 |
# Please customize the avrdude settings below first! |
42 |
# |
43 |
# make debug = Start either simulavr or avarice as specified for debugging, |
44 |
# with avr-gdb or avr-insight as the front end for debugging. |
45 |
# |
46 |
# make library = Build the library, then make software |
47 |
# |
48 |
# make filename.s = Just compile filename.c into the assembler code only. |
49 |
# |
50 |
# make filename.i = Create a preprocessed source file for use in submitting |
51 |
# bug reports to the GCC project. |
52 |
# |
53 |
# To rebuild project do "make clean" then "make all". |
54 |
#---------------------------------------------------------------------------- |
55 |
|
56 |
#if you want your code to work on the Firefly++ and not Firefly+ |
57 |
#then add the -DFFPP line to CDEFS |
58 |
CDEFS = |
59 |
#-DFFPP |
60 |
|
61 |
# MCU name |
62 |
MCU = atmega128 |
63 |
|
64 |
# Processor frequency. |
65 |
# This will define a symbol, F_CPU, in all source code files equal to the |
66 |
# processor frequency. You can then use this symbol in your source code to |
67 |
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
68 |
# automatically to create a 32-bit value in your source code. |
69 |
F_CPU = 8000000 |
70 |
|
71 |
# Output format. (can be srec, ihex, binary) |
72 |
FORMAT = ihex |
73 |
|
74 |
# List C source files here. (C dependencies are automatically generated.) |
75 |
SRC = $(wildcard *.c) |
76 |
|
77 |
# List Assembler source files here. |
78 |
# Make them always end in a capital .S. Files ending in a lowercase .s |
79 |
# will not be considered source files but generated files (assembler |
80 |
# output from the compiler), and will be deleted upon "make clean"! |
81 |
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
82 |
# it will preserve the spelling of the filenames, and gcc itself does |
83 |
# care about how the name is spelled on its command-line. |
84 |
ASRC = |
85 |
|
86 |
# Optimization level, can be [0, 1, 2, 3, s]. |
87 |
# 0 = turn off optimization. s = optimize for size. |
88 |
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
89 |
OPT = s |
90 |
|
91 |
# Debugging format. |
92 |
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
93 |
# AVR Studio 4.10 requires dwarf-2. |
94 |
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
95 |
DEBUG = |
96 |
|
97 |
# Compiler flag to set the C Standard level. |
98 |
# c89 = "ANSI" C |
99 |
# gnu89 = c89 plus GCC extensions |
100 |
# c99 = ISO C99 standard (not yet fully implemented) |
101 |
# gnu99 = c99 plus GCC extensions |
102 |
CSTANDARD = -std=gnu99 |
103 |
|
104 |
# Place -D or -U options here |
105 |
CDEFS += -DF_CPU=$(F_CPU)UL |
106 |
CDEFS += -DFFP |
107 |
# for wireless library |
108 |
ifdef USE_WIRELESS |
109 |
CDEFS += -DROBOT |
110 |
endif |
111 |
|
112 |
# Place -I, -L options here |
113 |
CINCS = -I$(COLONYROOT)/code/lib/include/libdragonfly |
114 |
CINCS += -L$(COLONYROOT)/code/lib/bin |
115 |
ifdef USE_WIRELESS |
116 |
CINCS += -I$(COLONYROOT)/code/lib/include/libwireless |
117 |
endif |
118 |
|
119 |
#---------------- Compiler Options ---------------- |
120 |
# -g*: generate debugging information |
121 |
# -O*: optimization level |
122 |
# -f...: tuning, see GCC manual and avr-libc documentation |
123 |
# -Wall...: warning level |
124 |
# -Wa,...: tell GCC to pass this to the assembler. |
125 |
# -adhlns...: create assembler listing |
126 |
CFLAGS = |
127 |
# CFLAGS = -g$(DEBUG) |
128 |
CFLAGS += $(CDEFS) $(CINCS) |
129 |
CFLAGS += -O$(OPT) |
130 |
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums |
131 |
CFLAGS += -Wall -Wstrict-prototypes |
132 |
CFLAGS += -Wa,-adhlns=$(<:.c=.lst) |
133 |
CFLAGS += $(CSTANDARD) |
134 |
|
135 |
#---------------- Assembler Options ---------------- |
136 |
# -Wa,...: tell GCC to pass this to the assembler. |
137 |
# -ahlms: create listing |
138 |
# -gstabs: have the assembler create line number information; note that |
139 |
# for use in COFF files, additional information about filenames |
140 |
# and function names needs to be present in the assembler source |
141 |
# files -- see avr-libc docs [FIXME: not yet described there] |
142 |
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
143 |
|
144 |
|
145 |
#---------------- Library Options ---------------- |
146 |
# Minimalistic printf version |
147 |
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
148 |
|
149 |
# Floating point printf version (requires MATH_LIB = -lm below) |
150 |
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
151 |
|
152 |
# If this is left blank, then it will use the Standard printf version. |
153 |
PRINTF_LIB = |
154 |
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
155 |
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
156 |
|
157 |
|
158 |
# Minimalistic scanf version |
159 |
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
160 |
|
161 |
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
162 |
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
163 |
|
164 |
# If this is left blank, then it will use the Standard scanf version. |
165 |
SCANF_LIB = |
166 |
#SCANF_LIB = $(SCANF_LIB_MIN) |
167 |
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
168 |
|
169 |
MATH_LIB = -lm |
170 |
|
171 |
#---------------- External Memory Options ---------------- |
172 |
|
173 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
174 |
# used for variables (.data/.bss) and heap (malloc()). |
175 |
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
176 |
|
177 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
178 |
# only used for heap (malloc()). |
179 |
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff |
180 |
|
181 |
EXTMEMOPTS = |
182 |
|
183 |
#---------------- Linker Options ---------------- |
184 |
# -Wl,...: tell GCC to pass this to linker. |
185 |
# -Map: create map file |
186 |
# --cref: add cross reference to map file |
187 |
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
188 |
LDFLAGS += $(EXTMEMOPTS) |
189 |
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
190 |
ifdef USE_WIRELESS |
191 |
LDFLAGS += -lwireless |
192 |
endif |
193 |
LDFLAGS += -ldragonfly |
194 |
|
195 |
|
196 |
|
197 |
#---------------- Programming Options (avrdude) ---------------- |
198 |
|
199 |
# Programming hardware: alf avr910 avrisp bascom bsd |
200 |
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
201 |
# |
202 |
# Type: avrdude -c ? |
203 |
# to get a full listing. |
204 |
# |
205 |
AVRDUDE_PROGRAMMER = avrisp |
206 |
|
207 |
# programmer connected to serial device |
208 |
|
209 |
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex |
210 |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
211 |
|
212 |
|
213 |
# Uncomment the following if you want avrdude's erase cycle counter. |
214 |
# Note that this counter needs to be initialized first using -Yn, |
215 |
# see avrdude manual. |
216 |
#AVRDUDE_ERASE_COUNTER = -y |
217 |
|
218 |
# Uncomment the following if you do /not/ wish a verification to be |
219 |
# performed after programming the device. |
220 |
#AVRDUDE_NO_VERIFY = -V |
221 |
|
222 |
# Increase verbosity level. Please use this when submitting bug |
223 |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
224 |
# to submit bug reports. |
225 |
#AVRDUDE_VERBOSE = -v -v |
226 |
|
227 |
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
228 |
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
229 |
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
230 |
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
231 |
|
232 |
#don't check for device signature |
233 |
AVRDUDE_FLAGS += -F |
234 |
|
235 |
|
236 |
|
237 |
#---------------- Debugging Options ---------------- |
238 |
|
239 |
# For simulavr only - target MCU frequency. |
240 |
DEBUG_MFREQ = $(F_CPU) |
241 |
|
242 |
# Set the DEBUG_UI to either gdb or insight. |
243 |
# DEBUG_UI = gdb |
244 |
DEBUG_UI = insight |
245 |
|
246 |
# Set the debugging back-end to either avarice, simulavr. |
247 |
DEBUG_BACKEND = avarice |
248 |
#DEBUG_BACKEND = simulavr |
249 |
|
250 |
# GDB Init Filename. |
251 |
GDBINIT_FILE = __avr_gdbinit |
252 |
|
253 |
# When using avarice settings for the JTAG |
254 |
JTAG_DEV = /dev/com1 |
255 |
|
256 |
# Debugging port used to communicate between GDB / avarice / simulavr. |
257 |
DEBUG_PORT = 4242 |
258 |
|
259 |
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
260 |
# just set to localhost unless doing some sort of crazy debugging when |
261 |
# avarice is running on a different computer. |
262 |
DEBUG_HOST = localhost |
263 |
|
264 |
|
265 |
|
266 |
#============================================================================ |
267 |
|
268 |
|
269 |
# Define programs and commands. |
270 |
SHELL = sh |
271 |
CC = avr-gcc |
272 |
OBJCOPY = avr-objcopy |
273 |
OBJDUMP = avr-objdump |
274 |
SIZE = avr-size |
275 |
NM = avr-nm |
276 |
AVRDUDE = avrdude |
277 |
REMOVE = rm -f |
278 |
REMOVEDIR = rm -rf |
279 |
COPY = cp |
280 |
WINSHELL = cmd |
281 |
|
282 |
|
283 |
# Define Messages |
284 |
# English |
285 |
MSG_ERRORS_NONE = Errors: none |
286 |
MSG_BEGIN = -------- begin -------- |
287 |
MSG_END = -------- end -------- |
288 |
MSG_SIZE_BEFORE = Size before: |
289 |
MSG_SIZE_AFTER = Size after: |
290 |
MSG_COFF = Converting to AVR COFF: |
291 |
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
292 |
MSG_FLASH = Creating load file for Flash: |
293 |
MSG_EEPROM = Creating load file for EEPROM: |
294 |
MSG_EXTENDED_LISTING = Creating Extended Listing: |
295 |
MSG_SYMBOL_TABLE = Creating Symbol Table: |
296 |
MSG_LINKING = Linking: |
297 |
MSG_COMPILING = Compiling: |
298 |
MSG_ASSEMBLING = Assembling: |
299 |
MSG_CLEANING = Cleaning project: |
300 |
MSG_LIBRARY_BUILD = Building library: |
301 |
MSG_LIBRARY_CHECK = Checking if we need to rebuild the library: |
302 |
|
303 |
|
304 |
|
305 |
# Define all object files. |
306 |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
307 |
|
308 |
# Define all listing files. |
309 |
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) |
310 |
|
311 |
|
312 |
# Compiler flags to generate dependency files. |
313 |
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d |
314 |
|
315 |
|
316 |
# Combine all necessary flags and optional flags. |
317 |
# Add target processor to flags. |
318 |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
319 |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
320 |
|
321 |
|
322 |
|
323 |
|
324 |
|
325 |
# Default target. |
326 |
all: begin gccversion lib sizebefore build sizeafter checksize end |
327 |
|
328 |
build: elf hex eep lss sym |
329 |
|
330 |
elf: $(TARGET).elf |
331 |
hex: $(TARGET).hex |
332 |
eep: $(TARGET).eep |
333 |
lss: $(TARGET).lss |
334 |
sym: $(TARGET).sym |
335 |
|
336 |
|
337 |
|
338 |
# Eye candy. |
339 |
# AVR Studio 3.x does not check make's exit code but relies on |
340 |
# the following magic strings to be generated by the compile job. |
341 |
begin: |
342 |
@echo |
343 |
@echo $(MSG_BEGIN) |
344 |
|
345 |
end: |
346 |
@echo $(MSG_END) |
347 |
@echo |
348 |
|
349 |
|
350 |
# Display size of file. |
351 |
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
352 |
ELFSIZE = $(SIZE) -A $(TARGET).elf |
353 |
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU) |
354 |
|
355 |
# Check RAM size (make sure under 4 kB) |
356 |
AWK = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'gawk'; else echo 'awk'; fi) |
357 |
DATASIZE = avr-size -A main.elf | grep 'data' | $(AWK) '{ print $$2 }' > 1.tmp |
358 |
BSSSIZE = avr-size -A main.elf | grep 'bss' | $(AWK) '{ print $$2 }' > 2.tmp |
359 |
ADD = expr `cat 1.tmp` + `cat 2.tmp` > 3.tmp |
360 |
CLEANSIZE = rm 1.tmp 2.tmp 3.tmp |
361 |
checksize: |
362 |
@$(DATASIZE) |
363 |
@$(BSSSIZE) |
364 |
@$(ADD) |
365 |
@if test `cat 3.tmp` -gt 4096; \ |
366 |
then echo "RAM size exceeded. Make .data or .bss smaller.";echo;exit 1; \ |
367 |
else echo ".data and .bss size fine";echo; fi |
368 |
@$(CLEANSIZE) |
369 |
|
370 |
# Display size before |
371 |
sizebefore: |
372 |
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
373 |
$(AVRMEM) 2>/dev/null; echo; fi |
374 |
|
375 |
# Display size after |
376 |
sizeafter: |
377 |
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
378 |
$(AVRMEM) 2>/dev/null; echo; fi |
379 |
|
380 |
|
381 |
|
382 |
# Display compiler version information. |
383 |
gccversion : |
384 |
@$(CC) --version |
385 |
|
386 |
|
387 |
# Build the library |
388 |
library: |
389 |
@echo $(MSG_LIBRARY_BUILD) |
390 |
make clean -C $(COLONYROOT)/code/projects/libdragonfly |
391 |
make dist -C $(COLONYROOT)/code/projects/libdragonfly |
392 |
ifdef USE_WIRELESS |
393 |
make clean -C $(COLONYROOT)/code/projects/libwireless/lib |
394 |
make dist -C $(COLONYROOT)/code/projects/libwireless/lib |
395 |
endif |
396 |
|
397 |
# Check if library needs to be built |
398 |
lib: |
399 |
@echo $(MSG_LIBRARY_CHECK) |
400 |
make dist -C $(COLONYROOT)/code/projects/libdragonfly |
401 |
#ifdef USE_WIRELESS |
402 |
make dist -C $(COLONYROOT)/code/projects/libwireless/lib |
403 |
#endif |
404 |
|
405 |
|
406 |
# Program the device. |
407 |
program: $(TARGET).hex $(TARGET).eep |
408 |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
409 |
|
410 |
|
411 |
# Generate avr-gdb config/init file which does the following: |
412 |
# define the reset signal, load the target file, connect to target, and set |
413 |
# a breakpoint at main(). |
414 |
gdb-config: |
415 |
@$(REMOVE) $(GDBINIT_FILE) |
416 |
@echo define reset >> $(GDBINIT_FILE) |
417 |
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
418 |
@echo end >> $(GDBINIT_FILE) |
419 |
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
420 |
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
421 |
ifeq ($(DEBUG_BACKEND),simulavr) |
422 |
@echo load >> $(GDBINIT_FILE) |
423 |
endif |
424 |
@echo break main >> $(GDBINIT_FILE) |
425 |
|
426 |
debug: gdb-config $(TARGET).elf |
427 |
ifeq ($(DEBUG_BACKEND), avarice) |
428 |
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
429 |
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
430 |
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
431 |
@$(WINSHELL) /c pause |
432 |
|
433 |
else |
434 |
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
435 |
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
436 |
endif |
437 |
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
438 |
|
439 |
|
440 |
|
441 |
|
442 |
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
443 |
COFFCONVERT=$(OBJCOPY) --debugging \ |
444 |
--change-section-address .data-0x800000 \ |
445 |
--change-section-address .bss-0x800000 \ |
446 |
--change-section-address .noinit-0x800000 \ |
447 |
--change-section-address .eeprom-0x810000 |
448 |
|
449 |
|
450 |
coff: $(TARGET).elf |
451 |
@echo |
452 |
@echo $(MSG_COFF) $(TARGET).cof |
453 |
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
454 |
|
455 |
|
456 |
extcoff: $(TARGET).elf |
457 |
@echo |
458 |
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
459 |
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
460 |
|
461 |
|
462 |
|
463 |
# Create final output files (.hex, .eep) from ELF output file. |
464 |
%.hex: %.elf |
465 |
@echo |
466 |
@echo $(MSG_FLASH) $@ |
467 |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
468 |
|
469 |
%.eep: %.elf |
470 |
@echo |
471 |
@echo $(MSG_EEPROM) $@ |
472 |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
473 |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
474 |
|
475 |
# Create extended listing file from ELF output file. |
476 |
%.lss: %.elf |
477 |
@echo |
478 |
@echo $(MSG_EXTENDED_LISTING) $@ |
479 |
$(OBJDUMP) -h -S $< > $@ |
480 |
|
481 |
# Create a symbol table from ELF output file. |
482 |
%.sym: %.elf |
483 |
@echo |
484 |
@echo $(MSG_SYMBOL_TABLE) $@ |
485 |
$(NM) -n $< > $@ |
486 |
|
487 |
|
488 |
|
489 |
# Link: create ELF output file from object files. |
490 |
.SECONDARY : $(TARGET).elf |
491 |
.PRECIOUS : $(OBJ) |
492 |
%.elf: $(OBJ) |
493 |
@echo |
494 |
@echo $(MSG_LINKING) $@ |
495 |
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
496 |
|
497 |
|
498 |
# Compile: create object files from C source files. |
499 |
%.o : %.c |
500 |
@echo |
501 |
@echo $(MSG_COMPILING) $< |
502 |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
503 |
|
504 |
|
505 |
# Compile: create assembler files from C source files. |
506 |
%.s : %.c |
507 |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
508 |
|
509 |
|
510 |
# Assemble: create object files from assembler source files. |
511 |
%.o : %.S |
512 |
@echo |
513 |
@echo $(MSG_ASSEMBLING) $< |
514 |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
515 |
|
516 |
# Create preprocessed source for use in sending a bug report. |
517 |
%.i : %.c |
518 |
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
519 |
|
520 |
|
521 |
# Target: clean project. |
522 |
clean: begin clean_list end |
523 |
|
524 |
clean_list : |
525 |
@echo |
526 |
@echo $(MSG_CLEANING) |
527 |
$(REMOVE) $(TARGET).hex |
528 |
$(REMOVE) $(TARGET).eep |
529 |
$(REMOVE) $(TARGET).cof |
530 |
$(REMOVE) $(TARGET).elf |
531 |
$(REMOVE) $(TARGET).map |
532 |
$(REMOVE) $(TARGET).sym |
533 |
$(REMOVE) $(TARGET).lss |
534 |
$(REMOVE) $(OBJ) |
535 |
$(REMOVE) $(LST) |
536 |
$(REMOVE) $(SRC:.c=.s) |
537 |
$(REMOVE) $(SRC:.c=.d) |
538 |
$(REMOVEDIR) .dep |
539 |
|
540 |
|
541 |
|
542 |
# Include the dependency files. |
543 |
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
544 |
|
545 |
|
546 |
# Listing of phony targets. |
547 |
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
548 |
build elf hex eep lss sym coff extcoff \ |
549 |
clean clean_list program debug gdb-config |
550 |
|