Colony

#include <dragonfly_lib.h>

int main(void)

{

        /* initialize components, set wireless channel */

        dragonfly_init(ALL_ON);

  //Replace the next two lines with your own code

  //You can add as many lines as you want

  uint8_t rangeNumber[] = {IR1,IR2,IR3,IR4,IR5}; //0 indexed

  uint8_t cIndex;

  //initial setup (IR1)

  cIndex=0;

  orb1_set_color(BLUE);

  orb2_set_color(GREEN);

        while(1) {

                usb_puti(range_read_distance(rangeNumber[cIndex]));

                usb_putc('\r');

                if (button1_click()) {

                        switch (cIndex){ //button1 chooses a color channel for "editing"

                                case 0: //IR1

                                        orb1_set_color(RED);

                                        orb2_set_color(RED);

                                        cIndex=1;

                                        break;

                                case 1: //IR2

                                        orb1_set_color(GREEN);

                                        orb2_set_color(GREEN);

                                        cIndex=2;

                                        break;

                                case 2: //IR3

                                        orb1_set_color(BLUE);

                                        orb2_set_color(BLUE);

                                        cIndex=3;

                                        break;

                                case 3: //IR4

                                        orb1_set_color(YELLOW);

                                        orb2_set_color(YELLOW);

                                        cIndex=4;

                                        break;        

                                case 4: //IR5

                                        orb1_set_color(BLUE);

                                        orb2_set_color(GREEN);

                                        cIndex=0;

                                        break;

                                default: //undefined

                                        return 0;

                                        break;

                        }

                        delay_ms(50); //allows button press to release

                }

                delay_ms(50); //refresh frequency: 1000/(50ms) refresh rate

        }

  //this tell the robot to just chill out forever. don't put anything after this

  while(1);

        return 0;

}