Activity
From 05/20/2011 to 06/18/2011
06/18/2011
- 02:18 PM Revision 23baced7: Added labeling areas to front chassis, fixed interference with Scoutfly by add...
- 08:42 AM Revision 7b95998b: Fixed centering error on rear chassis axle since widening hub clearances. Upda...
- 01:17 AM Revision fe821a41: Added fasteners, added clearance for pivot lock nut assembly. Added rubber wir...
06/17/2011
- 01:17 AM Revision 73f707fb: Added wire passthrough gasket to front chassis. Matched front pivot block to r...
06/16/2011
- 11:50 AM Revision 5f758dfb: Widened wheel hubs on front and rear chassis to increase clearance and avoid i...
- 11:05 AM Revision 2cfe296e: Removed extraneous fillets and fixed all geometry errors. First pass at 3D pri...
- 10:01 AM Revision 5b726cbf: Updated ribs and front screw bosses to avoid interference
- 09:43 AM Revision 695fd6e3: Updated rear cover screw bosses for better flow. Fixed interferences between r...
06/15/2011
- 12:40 AM Revision 1d3170a0: Added attachment screw bosses to rear cover, updated ribs for greater strength
- 12:07 AM Revision 22e82520: Added screw bosses to attach rear cover from underside of rear chassis. Using ...
- 11:12 PM Revision 2d91df81: Added fasteners and revised clearances. Adde cross rib to chassis.
06/14/2011
- 11:50 AM Revision a953c632: Enlarged hole sizes based on testing with prototype, fixed positioning of FFC ...
- 07:12 AM Revision b34e0a4f: Added support for breakfly PCB (full surround) based on testing with FDM print...
06/13/2011
- 11:59 AM Revision e9580328: Revised rib widths to follow molding guidelines. Previously were thicker than ...
- 09:28 AM Revision 58ea85ba: Homing switch for sonar assembly fully integrated.
06/12/2011
- 06:07 PM Revision bb7c6a1a: First pass at stepper homing switch.
- 02:06 AM Revision 78f8cd41: Added power switch and accessory port
- 01:25 AM Revision 2cfeb602: Added supports for breakfly pcb (acc port) and lock ins for BOM receivers.
- 01:10 AM Revision 2dce071b: Added FFC passthrough, strengthening ribs to rear chassis. Updated BOM block w...
06/09/2011
- 01:33 AM Revision 223e0a0c: 2nd pass on machining molds, added BOM sensors to model
- 11:30 PM Revision b5fb32b8: Fixed width error on rear chassis, updated molds with rib features.
06/08/2011
- 11:47 PM Revision bf675c50: Updated molds for rear chassis
- 10:22 PM Revision 5f264a0a: Removed fillets and other features that cannot be machined on RC CNC.
- 09:46 PM Revision c4523087: Fixed errors on rear cover, added mating features for rear chassis and rear ba...
06/07/2011
- 01:22 AM Revision d88ed555: Updated 2 part mold for rear chassis
- 09:35 PM Revision 8b064d78: Added rear bumper features and sketch block for BOM cutouts
06/04/2011
05/26/2011
Also available in: Atom