root / toolbox / main.c @ master
History | View | Annotate | Download (7.37 KB)
1 |
#include <stdint.h> |
---|---|
2 |
#include <string.h> |
3 |
#include <avr/io.h> |
4 |
#include <util/delay.h> |
5 |
#include "mb.h" |
6 |
#include "mbport.h" |
7 |
#include "tooltron_mb.h" |
8 |
#include "rfid.h" |
9 |
#include "led.h" |
10 |
#include "current.h" |
11 |
#include "time.h" |
12 |
|
13 |
#if TOOL_ADDRESS < 0 |
14 |
#error Please define TOOL_ADDRESS
|
15 |
#endif
|
16 |
|
17 |
enum toolstate_t {
|
18 |
TS_INIT, |
19 |
TS_OFF, |
20 |
TS_WAIT_ACCESS, |
21 |
TS_DENY, |
22 |
TS_REQ_DIS, |
23 |
TS_MISSING_ID, |
24 |
TS_ON, |
25 |
TS_OVER_CURRENT |
26 |
}; |
27 |
|
28 |
static enum toolstate_t toolstate = TS_INIT; |
29 |
static uint8_t coils;
|
30 |
static uint8_t latest_reading[RFID_SERNO_SIZE];
|
31 |
static uint8_t current_user[RFID_SERNO_SIZE];
|
32 |
static uint16_t current;
|
33 |
//static uint16_t current_max_warn, current_max_hard;
|
34 |
|
35 |
// watch for current spike when tool turns on
|
36 |
#define CURRENT_STARTUP_THRESH 10 |
37 |
#define CURRENT_STARTUP_TIMEOUT 200 // ms |
38 |
static uint8_t current_startup_timeout;
|
39 |
static uint16_t current_startup_value;
|
40 |
|
41 |
static inline void set_coil(char coil, char bit) { |
42 |
coils = (coils & ~(1 << coil)) | (bit << coil);
|
43 |
} |
44 |
static inline char get_coil(char coil) { |
45 |
return (coils >> coil) & 1; |
46 |
} |
47 |
|
48 |
static inline void tool_init() {DDRA |= _BV(DDA1);} |
49 |
static inline void tool_enable() {PORTA |= _BV(PA1);} |
50 |
static inline void tool_disable() {PORTA &= ~ _BV(PA1);} |
51 |
|
52 |
static inline void serno_zero(uint8_t *serno) { |
53 |
memset(serno, 0, RFID_SERNO_SIZE);
|
54 |
} |
55 |
|
56 |
static char serno_is_nonzero(uint8_t *serno) { |
57 |
int i;
|
58 |
for (i = 0; i < RFID_SERNO_SIZE; i++) { |
59 |
if (serno[i]) {
|
60 |
return 1; |
61 |
} |
62 |
} |
63 |
return 0; |
64 |
} |
65 |
|
66 |
static char serno_equal(uint8_t *a, uint8_t *b) { |
67 |
return memcmp(a, b, RFID_SERNO_SIZE) == 0; |
68 |
} |
69 |
|
70 |
static void serno_cpy(uint8_t *dest, uint8_t *src) { |
71 |
memcpy(dest, src, RFID_SERNO_SIZE); |
72 |
} |
73 |
|
74 |
static void tool_tick() { |
75 |
|
76 |
switch (toolstate) {
|
77 |
|
78 |
case TS_INIT:
|
79 |
if (get_coil(MB_COIL_INIT)) {
|
80 |
set_coil(MB_COIL_NEW, 0);
|
81 |
set_coil(MB_COIL_EN, 0);
|
82 |
set_coil(MB_COIL_REQ_DIS, 0);
|
83 |
toolstate = TS_OFF; |
84 |
} |
85 |
break;
|
86 |
|
87 |
case TS_OFF:
|
88 |
led_off(); |
89 |
set_coil(MB_COIL_EN, 0);
|
90 |
if (serno_is_nonzero(latest_reading)) {
|
91 |
serno_cpy(current_user, latest_reading); |
92 |
set_coil(MB_COIL_NEW, 1);
|
93 |
toolstate = TS_WAIT_ACCESS; |
94 |
} |
95 |
break;
|
96 |
|
97 |
case TS_WAIT_ACCESS:
|
98 |
led_yellow(); |
99 |
if (get_coil(MB_COIL_EN)) {
|
100 |
tool_enable(); |
101 |
toolstate = TS_ON; |
102 |
current_startup_timeout = CURRENT_STARTUP_TIMEOUT / TICK_MS; |
103 |
current_startup_value = current + CURRENT_STARTUP_THRESH; |
104 |
} else if (!get_coil(MB_COIL_NEW)) { |
105 |
toolstate = TS_DENY; |
106 |
} else if (!serno_equal(current_user, latest_reading)) { |
107 |
set_coil(MB_COIL_NEW, 0);
|
108 |
toolstate = TS_OFF; |
109 |
} |
110 |
break;
|
111 |
|
112 |
case TS_DENY:
|
113 |
led_red(); |
114 |
if (!serno_equal(current_user, latest_reading)) {
|
115 |
toolstate = TS_OFF; |
116 |
serno_zero(current_user); |
117 |
} |
118 |
break;
|
119 |
|
120 |
case TS_REQ_DIS:
|
121 |
if (!get_coil(MB_COIL_EN)) {
|
122 |
tool_disable(); |
123 |
toolstate = TS_OFF; |
124 |
} else if (!get_coil(MB_COIL_REQ_DIS)) { |
125 |
toolstate = TS_ON; |
126 |
} else {
|
127 |
// TODO blink yellow for 10 seconds or something
|
128 |
set_coil(MB_COIL_EN, 0);
|
129 |
set_coil(MB_COIL_REQ_DIS, 0);
|
130 |
tool_disable(); |
131 |
serno_zero(current_user); |
132 |
toolstate = TS_OFF; |
133 |
} |
134 |
break;
|
135 |
|
136 |
case TS_MISSING_ID:
|
137 |
if (current_startup_timeout > 0 && current > current_startup_value) { |
138 |
tool_disable(); |
139 |
set_coil(MB_COIL_EN, 0);
|
140 |
toolstate = TS_OVER_CURRENT; |
141 |
led_blink_start(500, 16, RED); |
142 |
} else if (!get_coil(MB_COIL_EN)) { |
143 |
tool_disable(); |
144 |
toolstate = TS_OFF; |
145 |
} else if (get_coil(MB_COIL_REQ_DIS)) { |
146 |
toolstate = TS_REQ_DIS; |
147 |
} else if (serno_equal(current_user, latest_reading)) { |
148 |
toolstate = TS_ON; |
149 |
} else if (led_blink_done()) { |
150 |
set_coil(MB_COIL_EN, 0);
|
151 |
tool_disable(); |
152 |
serno_zero(current_user); |
153 |
toolstate = TS_OFF; |
154 |
} |
155 |
if (current_startup_timeout > 0) { |
156 |
current_startup_timeout--; |
157 |
} |
158 |
break;
|
159 |
|
160 |
case TS_ON:
|
161 |
led_green(); |
162 |
if (current_startup_timeout > 0 && current > current_startup_value) { |
163 |
tool_disable(); |
164 |
set_coil(MB_COIL_EN, 0);
|
165 |
toolstate = TS_OVER_CURRENT; |
166 |
led_blink_start(500, 16, RED); |
167 |
} else if (!get_coil(MB_COIL_EN)) { |
168 |
tool_disable(); |
169 |
serno_zero(current_user); |
170 |
toolstate = TS_OFF; |
171 |
} else if(get_coil(MB_COIL_REQ_DIS)) { |
172 |
toolstate = TS_REQ_DIS; |
173 |
} else if (!serno_equal(current_user, latest_reading)) { |
174 |
toolstate = TS_MISSING_ID; |
175 |
led_blink_start(500, 16, YELLOW); |
176 |
} |
177 |
if (current_startup_timeout > 0) { |
178 |
current_startup_timeout--; |
179 |
} |
180 |
break;
|
181 |
|
182 |
case TS_OVER_CURRENT:
|
183 |
if (led_blink_done() && !serno_equal(current_user, latest_reading)) {
|
184 |
toolstate = TS_OFF; |
185 |
serno_zero(current_user); |
186 |
} |
187 |
break;
|
188 |
|
189 |
} |
190 |
|
191 |
} |
192 |
|
193 |
eMBErrorCode eMBRegCoilsCB(UCHAR *reg_buf, USHORT addr, USHORT n_coils, |
194 |
eMBRegisterMode mode) { |
195 |
|
196 |
addr--; |
197 |
|
198 |
if (addr+n_coils > N_COILS) {
|
199 |
return MB_ENOREG;
|
200 |
} |
201 |
|
202 |
if (mode == MB_REG_WRITE) {
|
203 |
|
204 |
switch (addr) {
|
205 |
|
206 |
case MB_COIL_NEW:
|
207 |
/* nop */
|
208 |
reg_buf[0] >>= 1; |
209 |
n_coils--; |
210 |
if (n_coils == 0) { |
211 |
return MB_ENOERR;
|
212 |
} |
213 |
|
214 |
case MB_COIL_EN:
|
215 |
set_coil(MB_COIL_NEW, 0);
|
216 |
set_coil(MB_COIL_EN, reg_buf[0] & 1); |
217 |
reg_buf[0] >>= 1; |
218 |
n_coils--; |
219 |
if (n_coils == 0) { |
220 |
return MB_ENOERR;
|
221 |
} |
222 |
|
223 |
case MB_COIL_REQ_DIS:
|
224 |
set_coil(MB_COIL_REQ_DIS, reg_buf[0] & 1); |
225 |
reg_buf[0] >>= 1; |
226 |
n_coils--; |
227 |
if (n_coils == 0) { |
228 |
return MB_ENOERR;
|
229 |
} |
230 |
|
231 |
case MB_COIL_INIT:
|
232 |
set_coil(MB_COIL_INIT, reg_buf[0] & 1); |
233 |
reg_buf[0] >>= 1; |
234 |
n_coils--; |
235 |
if (n_coils == 0) { |
236 |
return MB_ENOERR;
|
237 |
} |
238 |
} |
239 |
|
240 |
} else if (mode == MB_REG_READ) { |
241 |
|
242 |
reg_buf[0] = (coils >> addr) & ((1 << n_coils) - 1); |
243 |
return MB_ENOERR;
|
244 |
|
245 |
} |
246 |
|
247 |
return MB_EIO;
|
248 |
} |
249 |
|
250 |
eMBErrorCode eMBRegDiscreteCB(UCHAR *reg_buf, USHORT addr, USHORT n_coils) { |
251 |
return MB_ENOREG;
|
252 |
} |
253 |
|
254 |
eMBErrorCode eMBRegInputCB(UCHAR *reg_buf, USHORT addr, USHORT n_regs) { |
255 |
|
256 |
addr--; |
257 |
|
258 |
switch (addr) {
|
259 |
|
260 |
case MB_INP_SERNOL:
|
261 |
*reg_buf++ = current_user[0];
|
262 |
*reg_buf++ = current_user[1];
|
263 |
n_regs--; |
264 |
if (n_regs == 0) { |
265 |
return MB_ENOERR;
|
266 |
} |
267 |
|
268 |
case MB_INP_SERNOH:
|
269 |
*reg_buf++ = current_user[2];
|
270 |
*reg_buf++ = current_user[3];
|
271 |
n_regs--; |
272 |
if (n_regs == 0) { |
273 |
return MB_ENOERR;
|
274 |
} |
275 |
|
276 |
case MB_INP_CURRENT:
|
277 |
*reg_buf++ = (uint8_t)(current >> 8);
|
278 |
*reg_buf++ = (uint8_t)current; |
279 |
n_regs--; |
280 |
if (n_regs == 0) { |
281 |
return MB_ENOERR;
|
282 |
} |
283 |
|
284 |
default:
|
285 |
return MB_ENOREG;
|
286 |
} |
287 |
} |
288 |
|
289 |
eMBErrorCode eMBRegHoldingCB(UCHAR *reg_buf, USHORT addr, USHORT n_regs, |
290 |
eMBRegisterMode mode) { |
291 |
if (mode == MB_REG_WRITE) {
|
292 |
return MB_ENOREG;
|
293 |
} else if (mode == MB_REG_READ) { |
294 |
return MB_ENOREG;
|
295 |
} else {
|
296 |
return MB_EIO;
|
297 |
} |
298 |
} |
299 |
|
300 |
int main() {
|
301 |
char rfid_ticks = 0; |
302 |
|
303 |
time_init(); |
304 |
led_init(); |
305 |
tool_init(); |
306 |
rfid_init(); |
307 |
current_init(); |
308 |
|
309 |
eMBInit(MB_RTU, TOOL_ADDRESS, 0, MB_BAUD, MB_PAR_NONE);
|
310 |
eMBEnable(); |
311 |
|
312 |
sei(); |
313 |
|
314 |
rfid_start_read(); |
315 |
while (1) { |
316 |
if (rfid_poll()) {
|
317 |
rfid_get_serno(latest_reading); |
318 |
} |
319 |
if (++rfid_ticks >= RFID_PERIOD/TICK_MS)
|
320 |
{ |
321 |
rfid_ticks = 0;
|
322 |
rfid_start_read(); |
323 |
} |
324 |
current = current_read(); |
325 |
tool_tick(); |
326 |
led_tick(); |
327 |
eMBPoll(); |
328 |
time_wait(); |
329 |
} |
330 |
|
331 |
return 0; |
332 |
} |