| Revision:

root @ 208

Name Size Revision Age Author Comment
  docs 110 almost 14 years Kevin Woo Added the datasheet for the 485 chip and the 48...
  trunk 208 almost 13 years Brad Neuman fixed some netprog bugs and added a reset packe...

Latest revisions

# Date Author Comment
208 02/28/2010 05:08 PM Brad Neuman

fixed some netprog bugs and added a reset packet send

207 02/28/2010 04:34 PM Kevin Woo

Removed reset from the toolbox

206 02/27/2010 04:52 PM Kevin Woo

Moved the uart code to rs485_int since that describes it better.

205 02/27/2010 04:16 PM Kevin Woo

Removing serial.c since we have a uart one

204 02/26/2010 01:51 PM Kevin Woo

Some byte hacks to reduce size.

203 02/26/2010 01:49 PM Kevin Woo

Moved the uart code from toolbox to cardbox since toolbox now uses the bootloader rs485 code

202 02/26/2010 01:47 PM Kevin Woo
  • Moved the reset code to toolbox since it is the only code that uses it
  • Optimized the toolbox statemachine to use parse_packet and the bootloader
  • Small byte optimizations.
  • Down from 1024 bytes to 768 bytes
201 02/26/2010 01:06 PM Kevin Woo
  • Setup bootloader to initialize pins to a known safe state
  • Pulled pindefs for the toolbox out of the toolbox into common/toolbox_pindefs.h
  • Shared toolbox pindefs with the bootloader
  • Replaced all raw pin names with the #defined names
  • Optimizied out some bytes out of the bootloader by sharing variables
200 02/24/2010 10:59 PM Kevin Woo

Bootloader only emits a boot message when the buttons are depressed or it was reset by a watchdog

199 02/24/2010 10:16 PM Kevin Woo

Bootloader is setup to read the address from the EEPROM now

View all revisions | View revisions

Also available in: Atom