root / trunk / cardbox / rs485_int.c @ 206
History | View | Annotate | Download (1.96 KB)
1 |
/********
|
---|---|
2 |
* This file is part of Tooltron.
|
3 |
*
|
4 |
* Tooltron is free software: you can redistribute it and/or modify
|
5 |
* it under the terms of the Lesser GNU General Public License as published by
|
6 |
* the Free Software Foundation, either version 3 of the License, or
|
7 |
* (at your option) any later version.
|
8 |
*
|
9 |
* Tooltron is distributed in the hope that it will be useful,
|
10 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
11 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
12 |
* Lesser GNU General Public License for more details.
|
13 |
* You should have received a copy of the Lesser GNU General Public License
|
14 |
* along with Tooltron. If not, see <http://www.gnu.org/licenses/>.
|
15 |
*
|
16 |
* Copyright 2009 Kevin Woo <kwoo@2ndt.com>
|
17 |
*
|
18 |
********/
|
19 |
/** @file uart.c
|
20 |
*
|
21 |
* @brief Implements UART functionality in hardware
|
22 |
*
|
23 |
* @author Kevin Woo (kwoo)
|
24 |
*/
|
25 |
|
26 |
#include "uart.h" |
27 |
#include <util/delay.h> |
28 |
#include <stdint.h> |
29 |
|
30 |
uint8_t received_byte; //Byte received
|
31 |
uint8_t byte_ready; //New byte has been received
|
32 |
|
33 |
void init_uart(uint16_t baud) {
|
34 |
// Set baud rate
|
35 |
UBRRH = (uint8_t)(baud>>8);
|
36 |
UBRRL = (uint8_t)baud; |
37 |
|
38 |
// Enable RX/TX and RX/TX Interrupt
|
39 |
UCSRB = _BV(RXCIE) | _BV(RXEN) | _BV(TXCIE) | _BV(TXEN); |
40 |
|
41 |
// Enable the TXEN pin as output
|
42 |
DDRD |= TX_EN; |
43 |
|
44 |
// Initialize receive variables
|
45 |
byte_ready = 0;
|
46 |
received_byte = 0x0;
|
47 |
} |
48 |
|
49 |
int8_t uart_get_byte(uint8_t *output_byte) { |
50 |
if (byte_ready) {
|
51 |
byte_ready = 0;
|
52 |
*output_byte = received_byte; |
53 |
return 0; |
54 |
} else {
|
55 |
return -1; |
56 |
} |
57 |
} |
58 |
|
59 |
void uart_send_byte(uint8_t data) {
|
60 |
//Waits until current transmit is done
|
61 |
while (!(UCSRA & _BV(UDRE)));
|
62 |
|
63 |
// Enable writes and send
|
64 |
uart_toggle_transmit(UART_TX_ON); |
65 |
UDR = data; |
66 |
return;
|
67 |
} |
68 |
|
69 |
void uart_toggle_transmit(uint8_t state) {
|
70 |
if (state == UART_TX_ON) {
|
71 |
PORTD |= TX_EN; |
72 |
} else {
|
73 |
PORTD &= ~TX_EN; |
74 |
} |
75 |
} |
76 |
|
77 |
ISR(USART_RX_vect) { |
78 |
received_byte = UDR; |
79 |
byte_ready = 1;
|
80 |
} |
81 |
|
82 |
ISR(USART_TX_vect) { |
83 |
// Re-enable reads
|
84 |
uart_toggle_transmit(UART_TX_OFF); |
85 |
} |