/ - Repository - Tooltron - Robotics Club

root @ 205

Name	Size	Revision	Age	Author	Comment
docs		110	almost 14 years	Kevin Woo	Added the datasheet for the 485 chip and the 48...
trunk		205	almost 13 years	Kevin Woo	Removing serial.c since we have a uart one

#	Date	Author	Comment
205	02/27/2010 04:16 PM	Kevin Woo	Removing serial.c since we have a uart one
204	02/26/2010 01:51 PM	Kevin Woo	Some byte hacks to reduce size.
203	02/26/2010 01:49 PM	Kevin Woo	Moved the uart code from toolbox to cardbox since toolbox now uses the bootloader rs485 code
202	02/26/2010 01:47 PM	Kevin Woo	Moved the reset code to toolbox since it is the only code that uses it Optimized the toolbox statemachine to use parse_packet and the bootloader function Small byte optimizations. Down from 1024 bytes to 768 bytes
201	02/26/2010 01:06 PM	Kevin Woo	Setup bootloader to initialize pins to a known safe state Pulled pindefs for the toolbox out of the toolbox into common/toolbox_pindefs.h Shared toolbox pindefs with the bootloader Replaced all raw pin names with the #defined names Optimizied out some bytes out of the bootloader by sharing variables
200	02/24/2010 10:59 PM	Kevin Woo	Bootloader only emits a boot message when the buttons are depressed or it was reset by a watchdog
199	02/24/2010 10:16 PM	Kevin Woo	Bootloader is setup to read the address from the EEPROM now
198	02/24/2010 06:24 PM	Kevin Woo	Fixed a magic number initialization
197	02/24/2010 06:21 PM	Kevin Woo	Removed fuse writing since it seems to be placing the fuses out of memory and causing the programmer to fail
196	02/24/2010 05:57 PM	Kevin Woo	Fixed bug where the naked attribute did not work with main Used a noreturn attribute to main_start which saved us some room. That works Tested removal of interrupt tables, this works

Also available in: Atom