Project

General

Profile

Statistics
| Revision:

root @ 201

Name Size Revision Age Author Comment
  docs 110 about 15 years Kevin Woo Added the datasheet for the 485 chip and the 48...
  trunk 201 about 14 years Kevin Woo * Setup bootloader to initialize pins to a know...

Latest revisions

# Date Author Comment
201 02/26/2010 01:06 PM Kevin Woo
  • Setup bootloader to initialize pins to a known safe state
  • Pulled pindefs for the toolbox out of the toolbox into common/toolbox_pindefs.h
  • Shared toolbox pindefs with the bootloader
  • Replaced all raw pin names with the #defined names
  • Optimizied out some bytes out of the bootloader by sharing variables
200 02/24/2010 10:59 PM Kevin Woo

Bootloader only emits a boot message when the buttons are depressed or it was reset by a watchdog
199 02/24/2010 10:16 PM Kevin Woo

Bootloader is setup to read the address from the EEPROM now
198 02/24/2010 06:24 PM Kevin Woo

Fixed a magic number initialization
197 02/24/2010 06:21 PM Kevin Woo

Removed fuse writing since it seems to be placing the fuses out of memory and causing the programmer to fail
196 02/24/2010 05:57 PM Kevin Woo
  • Fixed bug where the naked attribute did not work with main
  • Used a noreturn attribute to main_start which saved us some room. That works
  • Tested removal of interrupt tables, this works
195 02/24/2010 03:54 PM Kevin Woo

Using a modified linker script to strip out the unused interrupt vector table in the bootloader. Not tested
194 02/24/2010 02:47 PM Kevin Woo

Added default fuses to the bootloader
193 02/24/2010 02:34 AM Kevin Woo

Made the main function in the bootloader naked, saved about 50 bytes
192 02/24/2010 02:26 AM Kevin Woo

Fixed offset error in the jump table

View all revisions | View revisions

Also available in: Atom