Activity
From 03/02/2010 to 03/31/2010
03/28/2010
- 01:40 PM Bug #1204 (Fixed): MySQL server goes away
- http://dev.mysql.com/doc/refman/5.0/en/gone-away.html
This happens sometimes when someone swipes after many hours ... - 08:55 PM Bug #1177 (Duplicate): cosmic bit flips
- 08:54 PM Task #1201 (Duplicate): Document the Server
- * State machine
* How to modify the server
* How to run manualtron
* How to set up the server (screen, etc)
- 08:53 PM Task #1200 (Duplicate): Update state machine interactions between cardbox and server
- 08:53 PM Task #1199 (Assigned): Document the States of the toolbox/cardbox
- 08:53 PM Task #1198 (Assigned): Document the Network Bootloader
- 08:52 PM Task #617 (Invalid): Buy Conduit
- 08:52 PM Task #1142 (Worksforme): Hot glue connectors in the two bandsaws
- 08:51 PM Bug #1151: input/output error
- Might be the FTDI chip browning out. Going to try to add a cap to the power rails when we get the parts for it
- 08:47 PM Bug #1150 (Worksforme): Fix USB issue with RS485 chip on cardbox schematic/layout
03/27/2010
- 03:36 PM Bug #1179 (Fixed): Tool ACL issues
- 02:47 PM Bug #1197 (Assigned): Keypad row 3 (7,8,9,C) does not work
- The keypad isn't busted (we probed the leads and saw that rows were connected) but we don't get anything from row 3.
...
03/26/2010
- 03:38 PM Task #1194 (Assigned): Put up a warning sign for Tooltron swiping responsibilities
- If you swipe, you are responsible for damages
- 09:42 PM Bug #1164: fix ERROR emails
- Also, and most importantly, the actual error messages don't get printed in the log. Presumably something else happens...
03/25/2010
- 05:37 PM Bug #1188 (Fixed): tooltron does not check if members have paid dues
- Should only get access if they have paid
03/24/2010
- 01:42 PM Bug #1179 (Fixed): Tool ACL issues
- This has been reported by 2 different people (Austin, Paul) for different tools (Bandsaw, Mill, Drill Press) where th...
03/23/2010
- 06:03 PM Task #1178 (Fixed): detect cosmic bit flips
- notice when we get a response from a tool we don't recognize
- 06:00 PM Bug #1157 (Duplicate): make tooltron log files split
- 06:00 PM Task #1144 (Fixed): Assign public tool numbers and print the list
- 05:59 PM Task #1145 (Fixed): Figure out tool times for each tool
- 05:59 PM Bug #1152 (Fixed): idiot mode exploit
- 05:52 PM Bug #1177 (Duplicate): cosmic bit flips
- A bit of the eeprom on tool 3 flipped, so the ADDR was 45 instead of 13.... wtf?
03/22/2010
- 11:45 AM Bug #1166 (Invalid): use ip instead of domain name in tooltron
- so it can work if DNS goes down
- 09:33 AM Enhancement #1165 (Wontfix): send email when tooltron recovers
- we get an ERROR email but there is no email to say that everything is back up and running as normal.
- 09:32 AM Bug #1164 (Fixed): fix ERROR emails
- it shouldn't be an error if the server reboots
also, 200 lines is way too many for the body
and sometimes the attac...
03/17/2010
03/16/2010
- 06:13 PM Bug #1157 (Duplicate): make tooltron log files split
- right now the file will grow forever!
03/05/2010
- 01:28 AM Task #506 (Fixed): Mount Tooltron Boards
- 01:23 AM Bug #1152 (Fixed): idiot mode exploit
- if a tool is left in idiot mode for hours and then an idiot comes over and holds green while turning the tool motor s...
- 12:00 AM Bug #1151 (Fixed): input/output error
- Traceback (most recent call last):
File "./tooltron.py", line 219, in <module>
common.sendKeyRequest()
Fil... - 11:47 PM Task #1137 (Fixed): Modify rs482 connector for cardbox
- 11:46 PM Task #1138 (Fixed): Reprogram all tools with new fuses/bootloader
- 11:46 PM Task #1139 (Fixed): Program correct tool IDs into the eeprom on all tools
- 11:45 PM Task #1141 (Fixed): Test Network programming with multiple tools
- 11:45 PM Task #1143 (Fixed): Mount cardbox
03/04/2010
- 12:46 AM Task #1126 (Fixed): Test new cardbox board
- * RS485 Works for USB and Cardbox, oscilliscope points out that the RS485 bus onboard works
* USB has been corrected... - 08:39 PM Enhancement #1140 (Fixed): Tool ping packet
03/03/2010
- 02:44 PM Bug #1150 (Worksforme): Fix USB issue with RS485 chip on cardbox schematic/layout
- Can't tie !RE/TE together, need to do TXEN -> TE and !RE -> GND
Also available in: Atom