Activity
From 02/27/2010 to 03/28/2010
03/28/2010
- 01:40 PM Bug #1204 (Fixed): MySQL server goes away
- http://dev.mysql.com/doc/refman/5.0/en/gone-away.html
This happens sometimes when someone swipes after many hours ... - 08:55 PM Bug #1177 (Duplicate): cosmic bit flips
- 08:54 PM Task #1201 (Duplicate): Document the Server
- * State machine
* How to modify the server
* How to run manualtron
* How to set up the server (screen, etc)
- 08:53 PM Task #1200 (Duplicate): Update state machine interactions between cardbox and server
- 08:53 PM Task #1199 (Assigned): Document the States of the toolbox/cardbox
- 08:53 PM Task #1198 (Assigned): Document the Network Bootloader
- 08:52 PM Task #617 (Invalid): Buy Conduit
- 08:52 PM Task #1142 (Worksforme): Hot glue connectors in the two bandsaws
- 08:51 PM Bug #1151: input/output error
- Might be the FTDI chip browning out. Going to try to add a cap to the power rails when we get the parts for it
- 08:47 PM Bug #1150 (Worksforme): Fix USB issue with RS485 chip on cardbox schematic/layout
03/27/2010
- 03:36 PM Bug #1179 (Fixed): Tool ACL issues
- 03:16 PM Revision 257: huge delay to keep the ftdi chip happy
- 03:06 PM Revision 256: added delay between messages on the bus
- 02:47 PM Bug #1197 (Assigned): Keypad row 3 (7,8,9,C) does not work
- The keypad isn't busted (we probed the leads and saw that rows were connected) but we don't get anything from row 3.
... - 02:37 PM Revision 255: Updated a define in tooltron.h
03/26/2010
- 05:04 PM Revision 254: added some logging output
- 03:38 PM Task #1194 (Assigned): Put up a warning sign for Tooltron swiping responsibilities
- If you swipe, you are responsible for damages
- 09:42 PM Bug #1164: fix ERROR emails
- Also, and most importantly, the actual error messages don't get printed in the log. Presumably something else happens...
03/25/2010
- 07:23 PM Revision 253: Fixed cardbox state machine to handle retries and more acks to the server. Fixed ca...
- 05:57 PM Revision 252: made tooltron server ignore card swipes during a transaction
- 05:51 PM Revision 251: added NACK if there is a double-swipe
- 05:37 PM Bug #1188 (Fixed): tooltron does not check if members have paid dues
- Should only get access if they have paid
- 05:28 PM Revision 250: ok, cardbox can't count time, making timeout higher again
- 05:26 PM Revision 249: increased timeout
- 05:24 PM Revision 248: fixed readcard timeout
- 05:21 PM Revision 247: manualtron now sends acks to cardbox
- 05:20 PM Revision 246: updated manualtron to deal with new key code
- 05:15 PM Revision 245: sign error
- 05:14 PM Revision 244: added time to common.py
- 05:00 PM Revision 243: updated server to deal with new cardbox code
- 09:46 AM Revision 242: fixed a bug with timeouts.
- Looks like timeouts might not be handled in all cases
03/24/2010
- 05:18 PM Revision 241: fixed log message
- 01:42 PM Bug #1179 (Fixed): Tool ACL issues
- This has been reported by 2 different people (Austin, Paul) for different tools (Bandsaw, Mill, Drill Press) where th...
- 12:10 PM Revision 240: set to use /var/log/tooltron as log file
- 08:20 PM Revision 239: removed extra error state for timeouts so we don't get so much error spam
03/23/2010
- 07:20 PM Revision 238: silly me
- 07:18 PM Revision 237: typo, damn python
- 07:16 PM Revision 236: forgot common.py
- 07:14 PM Revision 235: added handling for timeouts in readKey
- 06:59 PM Revision 234: fixed keypad timeout
- 06:43 PM Revision 233: oops
- 06:42 PM Revision 232: fixed timeout bug in tooltron server
- 06:03 PM Task #1178 (Fixed): detect cosmic bit flips
- notice when we get a response from a tool we don't recognize
- 06:00 PM Bug #1157 (Duplicate): make tooltron log files split
- 06:00 PM Task #1144 (Fixed): Assign public tool numbers and print the list
- 05:59 PM Task #1145 (Fixed): Figure out tool times for each tool
- 05:59 PM Bug #1152 (Fixed): idiot mode exploit
- 05:52 PM Bug #1177 (Duplicate): cosmic bit flips
- A bit of the eeprom on tool 3 flipped, so the ADDR was 45 instead of 13.... wtf?
- 05:27 PM Revision 231: fixed idiot mode exploit, needs testing
03/22/2010
- 11:45 AM Bug #1166 (Invalid): use ip instead of domain name in tooltron
- so it can work if DNS goes down
- 09:33 AM Enhancement #1165 (Wontfix): send email when tooltron recovers
- we get an ERROR email but there is no email to say that everything is back up and running as normal.
- 09:32 AM Bug #1164 (Fixed): fix ERROR emails
- it shouldn't be an error if the server reboots
also, 200 lines is way too many for the body
and sometimes the attac...
03/17/2010
03/16/2010
- 06:13 PM Bug #1157 (Duplicate): make tooltron log files split
- right now the file will grow forever!
- 03:46 PM Revision 230: added smarter (and more hacky) excpetion handling to tooltron.py
03/05/2010
- 01:28 AM Task #506 (Fixed): Mount Tooltron Boards
- 01:23 AM Bug #1152 (Fixed): idiot mode exploit
- if a tool is left in idiot mode for hours and then an idiot comes over and holds green while turning the tool motor s...
- 12:54 AM Revision 229: oops
- 12:51 AM Revision 228: fixed TRUE / FALSE bug
- 12:24 AM Revision 227: added software debounce for toolboxes
- 12:00 AM Bug #1151 (Fixed): input/output error
- Traceback (most recent call last):
File "./tooltron.py", line 219, in <module>
common.sendKeyRequest()
Fil... - 11:49 PM Revision 226: added more printouts to netprog
- 11:47 PM Task #1137 (Fixed): Modify rs482 connector for cardbox
- 11:46 PM Task #1138 (Fixed): Reprogram all tools with new fuses/bootloader
- 11:46 PM Task #1139 (Fixed): Program correct tool IDs into the eeprom on all tools
- 11:45 PM Task #1141 (Fixed): Test Network programming with multiple tools
- 11:45 PM Task #1143 (Fixed): Mount cardbox
- 08:20 PM Revision 225: fixed netprog reflection issues
- 07:59 PM Revision 224: fixed reflection handling in the server
- 07:58 PM Revision 223: Added a delay between receiving a packet and responding
03/04/2010
- 06:48 PM Revision 222: code reafactoring for server and manualtron
- 05:48 PM Revision 221: merged in manualtron fixes
- 12:46 AM Task #1126 (Fixed): Test new cardbox board
- * RS485 Works for USB and Cardbox, oscilliscope points out that the RS485 bus onboard works
* USB has been corrected... - 12:04 AM Revision 220: Fixed bug in packet where crc was not initialized, fixed keypad code. Apparently on...
- 10:24 PM Revision 219: some fixed to manualtron, NEED TO PORT TO TOOLTRON
- 08:39 PM Revision 218: changed messages to have payload length. Also created manualTron
- 08:39 PM Enhancement #1140 (Fixed): Tool ping packet
- 07:52 PM Revision 217: Added the ability to get the length of a packet, changed the packet format to inclu...
03/03/2010
- 03:32 PM Revision 216: Changed the keypad handler to be more simple in terms of code size
- 03:03 PM Revision 215: Merged tooltron.h
- 02:46 PM Revision 214: Added TT_PING auto response to the packet handler code
- 02:44 PM Bug #1150 (Worksforme): Fix USB issue with RS485 chip on cardbox schematic/layout
- Can't tie !RE/TE together, need to do TXEN -> TE and !RE -> GND
03/01/2010
- 02:48 AM Task #1145 (Fixed): Figure out tool times for each tool
- Make them unreasonable to anger the meches
- 02:47 AM Task #1144 (Fixed): Assign public tool numbers and print the list
- 02:47 AM Task #1143 (Fixed): Mount cardbox
- 02:45 AM Task #1142 (Worksforme): Hot glue connectors in the two bandsaws
- 02:45 AM Task #1141 (Fixed): Test Network programming with multiple tools
- This is a required step to install tooltron after all of the tools have been updated with the bootloader
- 02:45 AM Enhancement #1140 (Fixed): Tool ping packet
- Automatically handle in the packet handler to send an ack when received
- 02:43 AM Task #1139 (Fixed): Program correct tool IDs into the eeprom on all tools
- 02:43 AM Task #1138 (Fixed): Reprogram all tools with new fuses/bootloader
- 02:42 AM Task #1137 (Fixed): Modify rs482 connector for cardbox
- 7 stupid plugs into the cardbox
- 02:42 AM Bug #1103 (Fixed): Tools send wrong Ack message
- 02:41 AM Bug #1121 (Fixed): Update netprog to deal with errors
- 02:41 AM Bug #1133 (Fixed): Tool and server take wrong turnon message
- 02:40 AM Bug #1104 (Fixed): Remove magic number from uart init
- Fixed in all the code
- 02:32 AM Revision 213: fixed cardbox code for new board, updated tooltron.py for new cardbox
- 10:08 PM Revision 212: Scripts to program fuses automatically for the two boards
- 08:32 PM Revision 211: broken cardbox, needs to fix the statemachine
02/28/2010
- 05:40 PM Revision 210: Updated jumptable and Makefile for tooltron to work with bootloader
- updated tooltron.py to handle NACKs
Fixed tooltron.py to send 'o' instead of 'O' - 05:39 PM Revision 209: Restored reset to pristine state, fixed a bug in the error case for the bootloader
- 05:08 PM Revision 208: fixed some netprog bugs and added a reset packet send
- 05:00 PM Task #1124 (Fixed): Jump table for user code
- Tested with toolbox code
- 04:34 PM Revision 207: Removed reset from the toolbox
- 03:31 PM Bug #1131 (Fixed): network programming script sends 1 too many packets
02/27/2010
- 04:52 PM Revision 206: Moved the uart code to rs485_int since that describes it better.
- 04:16 PM Revision 205: Removing serial.c since we have a uart one
- 02:25 PM Enhancement #1079 (Fixed): Network Programming Support
- Network programming is implemented and works.
- 02:25 PM Task #1125 (Fixed): Cut usb cable to make new cardbox cable
- Made, but some of the wires are reversed in the intermediary connectors. Also the colors are reversed on the board en...
Also available in: Atom