Activity
From 02/25/2010 to 03/26/2010
03/26/2010
- 03:38 PM Task #1194 (Assigned): Put up a warning sign for Tooltron swiping responsibilities
- If you swipe, you are responsible for damages
- 09:42 PM Bug #1164: fix ERROR emails
- Also, and most importantly, the actual error messages don't get printed in the log. Presumably something else happens...
03/25/2010
- 05:37 PM Bug #1188 (Fixed): tooltron does not check if members have paid dues
- Should only get access if they have paid
03/24/2010
- 01:42 PM Bug #1179 (Fixed): Tool ACL issues
- This has been reported by 2 different people (Austin, Paul) for different tools (Bandsaw, Mill, Drill Press) where th...
03/23/2010
- 06:03 PM Task #1178 (Fixed): detect cosmic bit flips
- notice when we get a response from a tool we don't recognize
- 06:00 PM Bug #1157 (Duplicate): make tooltron log files split
- 06:00 PM Task #1144 (Fixed): Assign public tool numbers and print the list
- 05:59 PM Task #1145 (Fixed): Figure out tool times for each tool
- 05:59 PM Bug #1152 (Fixed): idiot mode exploit
- 05:52 PM Bug #1177 (Duplicate): cosmic bit flips
- A bit of the eeprom on tool 3 flipped, so the ADDR was 45 instead of 13.... wtf?
03/22/2010
- 11:45 AM Bug #1166 (Invalid): use ip instead of domain name in tooltron
- so it can work if DNS goes down
- 09:33 AM Enhancement #1165 (Wontfix): send email when tooltron recovers
- we get an ERROR email but there is no email to say that everything is back up and running as normal.
- 09:32 AM Bug #1164 (Fixed): fix ERROR emails
- it shouldn't be an error if the server reboots
also, 200 lines is way too many for the body
and sometimes the attac...
03/17/2010
03/16/2010
- 06:13 PM Bug #1157 (Duplicate): make tooltron log files split
- right now the file will grow forever!
03/05/2010
- 01:28 AM Task #506 (Fixed): Mount Tooltron Boards
- 01:23 AM Bug #1152 (Fixed): idiot mode exploit
- if a tool is left in idiot mode for hours and then an idiot comes over and holds green while turning the tool motor s...
- 12:00 AM Bug #1151 (Fixed): input/output error
- Traceback (most recent call last):
File "./tooltron.py", line 219, in <module>
common.sendKeyRequest()
Fil... - 11:47 PM Task #1137 (Fixed): Modify rs482 connector for cardbox
- 11:46 PM Task #1138 (Fixed): Reprogram all tools with new fuses/bootloader
- 11:46 PM Task #1139 (Fixed): Program correct tool IDs into the eeprom on all tools
- 11:45 PM Task #1141 (Fixed): Test Network programming with multiple tools
- 11:45 PM Task #1143 (Fixed): Mount cardbox
03/04/2010
- 12:46 AM Task #1126 (Fixed): Test new cardbox board
- * RS485 Works for USB and Cardbox, oscilliscope points out that the RS485 bus onboard works
* USB has been corrected... - 08:39 PM Enhancement #1140 (Fixed): Tool ping packet
03/03/2010
- 02:44 PM Bug #1150 (Worksforme): Fix USB issue with RS485 chip on cardbox schematic/layout
- Can't tie !RE/TE together, need to do TXEN -> TE and !RE -> GND
03/01/2010
- 02:48 AM Task #1145 (Fixed): Figure out tool times for each tool
- Make them unreasonable to anger the meches
- 02:47 AM Task #1144 (Fixed): Assign public tool numbers and print the list
- 02:47 AM Task #1143 (Fixed): Mount cardbox
- 02:45 AM Task #1142 (Worksforme): Hot glue connectors in the two bandsaws
- 02:45 AM Task #1141 (Fixed): Test Network programming with multiple tools
- This is a required step to install tooltron after all of the tools have been updated with the bootloader
- 02:45 AM Enhancement #1140 (Fixed): Tool ping packet
- Automatically handle in the packet handler to send an ack when received
- 02:43 AM Task #1139 (Fixed): Program correct tool IDs into the eeprom on all tools
- 02:43 AM Task #1138 (Fixed): Reprogram all tools with new fuses/bootloader
- 02:42 AM Task #1137 (Fixed): Modify rs482 connector for cardbox
- 7 stupid plugs into the cardbox
- 02:42 AM Bug #1103 (Fixed): Tools send wrong Ack message
- 02:41 AM Bug #1121 (Fixed): Update netprog to deal with errors
- 02:41 AM Bug #1133 (Fixed): Tool and server take wrong turnon message
- 02:40 AM Bug #1104 (Fixed): Remove magic number from uart init
- Fixed in all the code
02/28/2010
- 05:00 PM Task #1124 (Fixed): Jump table for user code
- Tested with toolbox code
- 03:31 PM Bug #1131 (Fixed): network programming script sends 1 too many packets
02/27/2010
- 02:25 PM Enhancement #1079 (Fixed): Network Programming Support
- Network programming is implemented and works.
- 02:25 PM Task #1125 (Fixed): Cut usb cable to make new cardbox cable
- Made, but some of the wires are reversed in the intermediary connectors. Also the colors are reversed on the board en...
02/26/2010
- 02:54 PM Task #1125: Cut usb cable to make new cardbox cable
- Need to do a CGgrid <-> Grey Cable <-> Circle Plug <-> CGrid adaptor to get the USB into the cardbox
- 12:48 PM Bug #1133 (Fixed): Tool and server take wrong turnon message
- The turnon message is defined at 'O' (capital "oh") when it should be 'o' (lower case "oh"). The server should send t...
Also available in: Atom