Added flyswatter schematic. Almost done.
Added 2,3,4 pin JST headers, fixed the RA 5 pin JST header
Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Added the new breakfly schematic.
finished diode traces, made board smaller (2x1 in exact)
about to add diodes for voltage drop before emitters
changed emitter resistors to 1206, redid traces
fixed ERC errors
added datasheets and new jst version of bom board
Current version of the scout library
Removed symlink to the library since that wasn't working
Version 1.0 of the scoutfly. These are the zipped gerbers. Sent to the board/stencil houses
Fixed issues with non-standard resistor values
Fixed error in smybol for the Power OR controllers where the FET's drain only had 1 out of 6 connections. Finished redoing the floorplan on the Power OR section. Routing done for the top and bottom layers. Only need to do the power plane level now.
fixed some bom layout stuff
Routed some power planes. Started on the power OR controllers but need to redo floorplan.
Added SPI lines to the wireless chip and the control lines. Replaced standoff terminals with the Sparkfun parts which have better keepouts for the screwheads.
Routed all signal wires out of the ARM. Still need to do final connections. Moved flash jumpers and debug port around to facilitate routing
updates scout BOM schematic and board. i finished routing, but needs to be checked.
Finished routing PSU, user buttons, fixed a bug in tolerances in the wireless chip.
Reorganized the I2C pins on the FFC. Routed I2C and the I2C levelshifter. Finished the PSU poly pours except for the VCC pour. The Motor current limiters are laid out except for the VCC connection. Hooked up the wireless chips except SPI. Added a mounting hole for the BOM board.
Also available in: Atom