commit 15a40e6fb93b558695eb3c99e5f20c20284f97ec
Author: Julian Binder <jabinder@andrew.cmu.edu>
Date:   Thu Nov 29 23:51:58 2012 -0500

    fixed the shutdown circuit to use one of the gpio pins. added pullldown resistor on the gumstix side of the level converter. routed this to the shdn pins of the power supplies

diff --git a/scoutfly/scoutfly_rev3.brd b/scoutfly/scoutfly_rev3.brd
old mode 100644
new mode 100755
index b92b8fc..4969c6f
--- a/scoutfly/scoutfly_rev3.brd
+++ b/scoutfly/scoutfly_rev3.brd
@@ -1,12 +1,12 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.3">
+<eagle version="6.2">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="5" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="1" altunitdist="mil" altunit="mil"/>
+<grid distance="5" unitdist="mil" unit="inch" style="lines" multiple="1" display="yes" altdistance="1" altunitdist="mil" altunit="inch"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="2" name="Power" color="1" fill="3" visible="yes" active="yes"/>
@@ -120,7 +120,7 @@
 <wire x1="114.3" y1="0" x2="114.3" y2="89.027" width="0" layer="20"/>
 <wire x1="114.3" y1="89.027" x2="0" y2="89.027" width="0" layer="20"/>
 <wire x1="0" y1="89.027" x2="0" y2="0" width="0" layer="20"/>
-<text x="44.958" y="5.842" size="1.778" layer="21" font="vector" ratio="15">ScoutFly v1.3</text>
+<text x="44.958" y="5.842" size="1.778" layer="21" font="vector" ratio="15">ScoutFly v1.4</text>
 <text x="44.831" y="3.937" size="1.27" layer="21" font="vector" ratio="15">jabinder alevkoy</text>
 <text x="58.42" y="0.508" size="1.27" layer="21" font="vector" ratio="15">03.24.2012</text>
 <text x="40.386" y="62.611" size="0.6096" layer="21" ratio="15" rot="R270">VBATT</text>
@@ -170,8 +170,7 @@
 <text x="11.684" y="17.526" size="0.4064" layer="21" ratio="15">!IRQ</text>
 <text x="13.843" y="17.526" size="0.4064" layer="21" ratio="15">ARM GPIO</text>
 <text x="13.843" y="17.018" size="0.4064" layer="21" ratio="15">SPARE 8</text>
-<text x="13.97" y="24.511" size="0.4064" layer="21" ratio="15">ARM GPIO</text>
-<text x="13.97" y="24.003" size="0.4064" layer="21" ratio="15">SPARE 7</text>
+<text x="13.97" y="24.003" size="0.4064" layer="21" ratio="15">SHDN</text>
 <text x="11.684" y="24.003" size="0.4064" layer="21" ratio="15">CS0</text>
 <text x="9.017" y="24.003" size="0.4064" layer="21" ratio="15">SCLK</text>
 <text x="6.477" y="24.003" size="0.4064" layer="21" ratio="15">MISO</text>
@@ -1919,55 +1918,6 @@ chip</description>
 </package>
 </packages>
 </library>
-<library name="74xx-eu">
-<packages>
-<package name="SO14">
-<description>&lt;b&gt;Small Outline package&lt;/b&gt; 150 mil</description>
-<wire x1="4.064" y1="1.9558" x2="-4.064" y2="1.9558" width="0.1524" layer="51"/>
-<wire x1="4.064" y1="-1.9558" x2="4.445" y2="-1.5748" width="0.1524" layer="21" curve="90"/>
-<wire x1="-4.445" y1="1.5748" x2="-4.064" y2="1.9558" width="0.1524" layer="21" curve="-90"/>
-<wire x1="4.064" y1="1.9558" x2="4.445" y2="1.5748" width="0.1524" layer="21" curve="-90"/>
-<wire x1="-4.445" y1="-1.5748" x2="-4.064" y2="-1.9558" width="0.1524" layer="21" curve="90"/>
-<wire x1="-4.064" y1="-1.9558" x2="4.064" y2="-1.9558" width="0.1524" layer="51"/>
-<wire x1="4.445" y1="-1.5748" x2="4.445" y2="1.5748" width="0.1524" layer="21"/>
-<wire x1="-4.445" y1="1.5748" x2="-4.445" y2="0.508" width="0.1524" layer="21"/>
-<wire x1="-4.445" y1="0.508" x2="-4.445" y2="-0.508" width="0.1524" layer="21"/>
-<wire x1="-4.445" y1="-0.508" x2="-4.445" y2="-1.5748" width="0.1524" layer="21"/>
-<wire x1="-4.445" y1="0.508" x2="-4.445" y2="-0.508" width="0.1524" layer="21" curve="-180"/>
-<wire x1="-4.445" y1="-1.6002" x2="4.445" y2="-1.6002" width="0.0508" layer="21"/>
-<smd name="1" x="-3.81" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="14" x="-3.81" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="2" x="-2.54" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="3" x="-1.27" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="13" x="-2.54" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="12" x="-1.27" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="4" x="0" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="11" x="0" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="5" x="1.27" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="6" x="2.54" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="10" x="1.27" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="9" x="2.54" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="7" x="3.81" y="-3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<smd name="8" x="3.81" y="3.0734" dx="0.6604" dy="2.032" layer="1"/>
-<text x="-3.175" y="-0.762" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
-<text x="-4.826" y="-1.905" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
-<rectangle x1="-0.254" y1="1.9558" x2="0.254" y2="3.0988" layer="51"/>
-<rectangle x1="-4.064" y1="-3.0988" x2="-3.556" y2="-1.9558" layer="51"/>
-<rectangle x1="-2.794" y1="-3.0988" x2="-2.286" y2="-1.9558" layer="51"/>
-<rectangle x1="-1.524" y1="-3.0734" x2="-1.016" y2="-1.9304" layer="51"/>
-<rectangle x1="-0.254" y1="-3.0988" x2="0.254" y2="-1.9558" layer="51"/>
-<rectangle x1="-1.524" y1="1.9558" x2="-1.016" y2="3.0988" layer="51"/>
-<rectangle x1="-2.794" y1="1.9558" x2="-2.286" y2="3.0988" layer="51"/>
-<rectangle x1="-4.064" y1="1.9558" x2="-3.556" y2="3.0988" layer="51"/>
-<rectangle x1="1.016" y1="1.9558" x2="1.524" y2="3.0988" layer="51"/>
-<rectangle x1="2.286" y1="1.9558" x2="2.794" y2="3.0988" layer="51"/>
-<rectangle x1="3.556" y1="1.9558" x2="4.064" y2="3.0988" layer="51"/>
-<rectangle x1="1.016" y1="-3.0988" x2="1.524" y2="-1.9558" layer="51"/>
-<rectangle x1="2.286" y1="-3.0988" x2="2.794" y2="-1.9558" layer="51"/>
-<rectangle x1="3.556" y1="-3.0988" x2="4.064" y2="-1.9558" layer="51"/>
-</package>
-</packages>
-</library>
 </libraries>
 <attributes>
 </attributes>
@@ -1977,7 +1927,7 @@ chip</description>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="laendru *">
+<designrules>
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für 
@@ -2432,8 +2382,7 @@ Please make sure your boards conform to these design rules.</description>
 <element name="U$9" library="kwoo" package="6-TSOT23" value="MAX16054" x="31.75" y="57.658"/>
 <element name="U6" library="kwoo" package="5-SOT23" value="MCP1801T-3302I/OTCT-ND" x="31.75" y="61.976" rot="R90"/>
 <element name="S2" library="SparkFun" package="TACTILE_SWITCH_SMD" value="" x="35.56" y="67.691" rot="R180"/>
-<element name="IC2" library="74xx-eu" package="SO14" value="74AC04D" x="6.858" y="50.292" rot="R90"/>
-<element name="R1" library="resistor" package="R0603" value="10K" x="37.592" y="56.769" rot="MR180"/>
+<element name="R1" library="resistor" package="R0603" value="50k" x="14.097" y="39.37" rot="MR180"/>
 <element name="C22" library="rcl" package="CT6032" value="220uf" x="55.118" y="76.073" rot="R270"/>
 <element name="C23" library="rcl" package="CT6032" value="220uf" x="16.256" y="53.721"/>
 </elements>
@@ -2598,7 +2547,6 @@ Please make sure your boards conform to these design rules.</description>
 <contactref element="D1" pad="1"/>
 <contactref element="U6" pad="2"/>
 <contactref element="U$9" pad="2"/>
-<contactref element="IC2" pad="7"/>
 <contactref element="C3" pad="2"/>
 <contactref element="U$10" pad="5"/>
 <contactref element="S2" pad="1"/>
@@ -2972,27 +2920,7 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="10.741" y1="58.674" x2="10.741" y2="59.944" width="0.4064" layer="1"/>
 <wire x1="10.741" y1="58.674" x2="10.741" y2="57.404" width="0.4064" layer="1"/>
 <wire x1="10.741" y1="64.957" x2="9.912" y2="65.786" width="0.4064" layer="1"/>
-<wire x1="10.287" y1="72.644" x2="11.43" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="10.287" y1="72.644" x2="12.573" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="9.912" y1="65.786" x2="9.912" y2="72.269" width="0.4064" layer="1"/>
-<wire x1="9.912" y1="72.269" x2="10.287" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="12.573" y1="72.644" x2="13.716" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="13.716" y1="72.644" x2="14.859" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="10.287" y1="72.644" x2="9.144" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="9.144" y1="72.644" x2="8.001" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="8.001" y1="72.644" x2="6.858" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="6.858" y1="72.644" x2="5.715" y2="72.644" width="0.4064" layer="1"/>
-<wire x1="3.81" y1="74.549" x2="3.81" y2="85.09" width="0.4064" layer="1"/>
-<wire x1="5.715" y1="72.644" x2="3.81" y2="74.549" width="0.4064" layer="1"/>
 <wire x1="15.494" y1="78.74" x2="15.494" y2="79.375" width="0.4064" layer="1"/>
-<wire x1="17.145" y1="77.089" x2="15.494" y2="78.74" width="0.4064" layer="1"/>
-<wire x1="17.145" y1="73.787" x2="17.145" y2="77.089" width="0.4064" layer="1"/>
-<wire x1="17.653" y1="73.279" x2="17.145" y2="73.787" width="0.4064" layer="1"/>
-<wire x1="17.653" y1="72.263" x2="17.653" y2="73.279" width="0.4064" layer="1"/>
-<wire x1="15.24" y1="72.263" x2="17.653" y2="72.263" width="0.4064" layer="1"/>
-<wire x1="14.859" y1="72.644" x2="15.24" y2="72.263" width="0.4064" layer="1"/>
-<wire x1="17.653" y1="72.263" x2="17.653" y2="71.247" width="0.4064" layer="1"/>
-<wire x1="17.653" y1="71.247" x2="17.653" y2="70.231" width="0.4064" layer="1"/>
 <wire x1="22.477" y1="27.301" x2="21.34" y2="27.301" width="0.4064" layer="1"/>
 <wire x1="21.34" y1="27.301" x2="21.336" y2="27.305" width="0.4064" layer="1"/>
 <wire x1="41.148" y1="87.503" x2="42.838" y2="85.813" width="0.4064" layer="16"/>
@@ -3023,7 +2951,6 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="9.525" y1="59.944" x2="9.144" y2="60.325" width="0.4064" layer="1"/>
 <wire x1="10.741" y1="59.944" x2="9.525" y2="59.944" width="0.4064" layer="1"/>
 <wire x1="10.741" y1="54.9116" x2="10.741" y2="58.674" width="0.4064" layer="1"/>
-<wire x1="9.9314" y1="54.102" x2="10.741" y2="54.9116" width="0.4064" layer="1"/>
 <wire x1="10.741" y1="59.944" x2="10.741" y2="61.214" width="0.4064" layer="1"/>
 <wire x1="33.02" y1="65.278" x2="33.02" y2="65.786" width="0.4064" layer="1"/>
 <wire x1="33.02" y1="65.786" x2="38.1" y2="65.786" width="0.4064" layer="1"/>
@@ -3091,10 +3018,6 @@ Please make sure your boards conform to these design rules.</description>
 <via x="106.045" y="72.898" extent="1-16" drill="0.381"/>
 <via x="15.494" y="79.375" extent="1-16" drill="0.381"/>
 <via x="43.561" y="57.023" extent="1-16" drill="0.381"/>
-<via x="17.653" y="73.279" extent="1-16" drill="0.381"/>
-<via x="17.653" y="72.263" extent="1-16" drill="0.381"/>
-<via x="17.653" y="71.247" extent="1-16" drill="0.381"/>
-<via x="17.653" y="70.231" extent="1-16" drill="0.381"/>
 <via x="17.526" y="45.466" extent="1-16" drill="0.381"/>
 <via x="17.526" y="46.482" extent="1-16" drill="0.381"/>
 <via x="17.526" y="47.498" extent="1-16" drill="0.381"/>
@@ -3124,15 +3047,6 @@ Please make sure your boards conform to these design rules.</description>
 <via x="17.653" y="20.32" extent="1-16" drill="0.381"/>
 <via x="17.653" y="19.177" extent="1-16" drill="0.381"/>
 <via x="17.653" y="18.034" extent="1-16" drill="0.381"/>
-<via x="5.715" y="72.644" extent="1-16" drill="0.381"/>
-<via x="6.858" y="72.644" extent="1-16" drill="0.381"/>
-<via x="8.001" y="72.644" extent="1-16" drill="0.381"/>
-<via x="9.144" y="72.644" extent="1-16" drill="0.381"/>
-<via x="10.287" y="72.644" extent="1-16" drill="0.381"/>
-<via x="11.43" y="72.644" extent="1-16" drill="0.381"/>
-<via x="12.573" y="72.644" extent="1-16" drill="0.381"/>
-<via x="13.716" y="72.644" extent="1-16" drill="0.381"/>
-<via x="14.859" y="72.644" extent="1-16" drill="0.381"/>
 <via x="76.962" y="58.293" extent="1-16" drill="0.381"/>
 <via x="76.962" y="57.023" extent="1-16" drill="0.381"/>
 <via x="76.962" y="59.563" extent="1-16" drill="0.381"/>
@@ -3181,7 +3095,6 @@ Please make sure your boards conform to these design rules.</description>
 <via x="13.462" y="9.271" extent="1-16" drill="0.381"/>
 <via x="3.81" y="3.81" extent="1-16" drill="2.9464" diameter="4.5466"/>
 <via x="110.49" y="3.81" extent="1-16" drill="2.9464" diameter="4.5466"/>
-<via x="3.81" y="85.09" extent="1-16" drill="2.9464" diameter="4.5466"/>
 <via x="110.49" y="85.09" extent="1-16" drill="2.9464" diameter="4.5466"/>
 <via x="110.49" y="8.89" extent="1-16" drill="0.6"/>
 <via x="2.413" y="8.382" extent="1-16" drill="0.6"/>
@@ -3382,10 +3295,21 @@ Please make sure your boards conform to these design rules.</description>
 </polygon>
 <contactref element="Q18" pad="3"/>
 <contactref element="SV3" pad="1"/>
-<wire x1="6.604" y1="75.946" x2="6.604" y2="74.549" width="0.8128" layer="1"/>
-<wire x1="6.604" y1="74.549" x2="7.0612" y2="74.0918" width="0.8128" layer="1"/>
-<wire x1="7.0612" y1="74.0918" x2="12.9794" y2="74.0918" width="0.8128" layer="1"/>
-<wire x1="12.9794" y1="74.0918" x2="13.396" y2="75.889" width="0" layer="19" extent="1-1"/>
+<polygon width="0.2032" layer="1" thermals="no">
+<vertex x="13.335" y="76.835"/>
+<vertex x="16.129" y="76.835"/>
+<vertex x="16.129" y="75.057"/>
+<vertex x="14.859" y="73.787"/>
+<vertex x="12.7" y="73.787"/>
+<vertex x="12.7" y="74.422"/>
+<vertex x="13.208" y="74.93"/>
+<vertex x="13.208" y="76.708"/>
+</polygon>
+<contactref element="R1" pad="1"/>
+<wire x1="11.938" y1="40.767" x2="11.938" y2="40.679" width="0.2032" layer="16"/>
+<wire x1="11.938" y1="40.679" x2="13.247" y2="39.37" width="0.2032" layer="16"/>
+<wire x1="15.494" y1="78.74" x2="15.494" y2="76.708" width="1.016" layer="1"/>
+<wire x1="15.494" y1="76.708" x2="14.351" y2="75.565" width="1.016" layer="1"/>
 </signal>
 <signal name="!PWR_KILL">
 <contactref element="U$16" pad="GPIO127_TS_IRQ"/>
@@ -3862,22 +3786,6 @@ Please make sure your boards conform to these design rules.</description>
 </signal>
 <signal name="VCHARGE">
 <contactref element="R58" pad="1"/>
-<wire x1="43.434" y1="63.461" x2="43.434" y2="65.278" width="0.4064" layer="16"/>
-<wire x1="43.307" y1="63.334" x2="43.434" y2="63.461" width="0.4064" layer="16"/>
-<wire x1="27.686" y1="82.931" x2="25.908" y2="84.709" width="1.27" layer="16"/>
-<wire x1="27.686" y1="80.645" x2="27.686" y2="82.931" width="1.27" layer="16"/>
-<wire x1="30.099" y1="78.232" x2="27.686" y2="80.645" width="1.27" layer="16"/>
-<wire x1="38.354" y1="78.232" x2="30.099" y2="78.232" width="1.27" layer="16"/>
-<wire x1="40.259" y1="76.327" x2="38.354" y2="78.232" width="1.27" layer="16"/>
-<wire x1="40.259" y1="68.453" x2="40.259" y2="76.327" width="1.27" layer="16"/>
-<wire x1="43.434" y1="65.278" x2="40.259" y2="68.453" width="1.27" layer="16"/>
-<wire x1="53.848" y1="79.248" x2="53.355" y2="78.755" width="1.27" layer="16"/>
-<wire x1="56.388" y1="79.248" x2="53.848" y2="79.248" width="1.27" layer="16"/>
-<wire x1="58.039" y1="77.597" x2="56.388" y2="79.248" width="1.27" layer="16"/>
-<wire x1="58.039" y1="71.882" x2="58.039" y2="77.597" width="1.27" layer="16"/>
-<wire x1="56.896" y1="70.739" x2="58.039" y2="71.882" width="1.27" layer="16"/>
-<wire x1="48.895" y1="70.739" x2="56.896" y2="70.739" width="1.27" layer="16"/>
-<wire x1="43.434" y1="65.278" x2="48.895" y2="70.739" width="1.27" layer="16"/>
 </signal>
 <signal name="VUSB">
 <contactref element="L5" pad="1"/>
@@ -3957,7 +3865,7 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="18.3896" y1="56.134" x2="26.416" y2="56.134" width="0.4064" layer="16"/>
 <wire x1="17.9578" y1="55.7022" x2="18.3896" y2="56.134" width="0.4064" layer="16"/>
 <via x="67.818" y="66.421" extent="1-16" drill="0.381"/>
-<via x="27.559" y="68.453" extent="1-16" drill="0.381"/>
+<via x="27.559" y="68.453" extent="1-16" drill="0.6"/>
 <via x="28.829" y="68.453" extent="1-16" drill="0.381"/>
 <via x="104.14" y="74.168" extent="1-16" drill="0.381"/>
 <via x="107.823" y="76.2" extent="1-16" drill="0.381"/>
@@ -4016,28 +3924,19 @@ Please make sure your boards conform to these design rules.</description>
 <vertex x="30.861" y="66.929"/>
 </polygon>
 <contactref element="F1" pad="2"/>
-<wire x1="21.218" y1="85.344" x2="23.241" y2="85.344" width="0.8128" layer="1"/>
-<wire x1="23.241" y1="85.344" x2="23.495" y2="85.09" width="0.8128" layer="1"/>
-<wire x1="23.495" y1="85.09" x2="23.495" y2="75.692" width="0.8128" layer="1"/>
-<wire x1="23.495" y1="75.692" x2="23.9268" y2="75.2602" width="0.8128" layer="1"/>
-<wire x1="23.9268" y1="75.2602" x2="25.0698" y2="75.2602" width="0.8128" layer="1"/>
 <wire x1="19.304" y1="85.344" x2="21.218" y2="85.344" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="85.598" x2="19.304" y2="85.344" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="86.487" x2="19.05" y2="85.598" width="0.4064" layer="1"/>
 <wire x1="15.113" y1="86.487" x2="19.05" y2="86.487" width="0.4064" layer="16"/>
 <wire x1="14.859" y1="86.233" x2="15.113" y2="86.487" width="0.4064" layer="16"/>
-<wire x1="21.218" y1="85.344" x2="21.218" y2="81.779" width="0.4064" layer="1"/>
-<wire x1="21.218" y1="81.779" x2="21.463" y2="81.534" width="0.4064" layer="1"/>
-<wire x1="21.463" y1="81.534" x2="22.479" y2="81.534" width="0.4064" layer="1"/>
-<wire x1="22.479" y1="81.534" x2="22.479" y2="81.915" width="0.4064" layer="16"/>
-<wire x1="22.479" y1="81.915" x2="22.264" y2="82.13" width="0.4064" layer="16"/>
-<wire x1="23.495" y1="85.09" x2="23.495" y2="83.82" width="1.016" layer="1"/>
-<wire x1="23.495" y1="83.82" x2="23.622" y2="83.693" width="1.016" layer="1"/>
-<wire x1="23.622" y1="83.693" x2="30.353" y2="83.693" width="1.016" layer="1"/>
-<wire x1="30.353" y1="83.693" x2="30.988" y2="84.328" width="1.016" layer="1"/>
 <via x="19.05" y="86.487" extent="1-16" drill="0.381"/>
-<via x="22.479" y="81.534" extent="1-16" drill="0.381"/>
-<wire x1="27.559" y1="68.453" x2="25.0698" y2="75.2602" width="0" layer="19" extent="1-1"/>
+<wire x1="21.218" y1="85.344" x2="28.067" y2="85.344" width="1.016" layer="1"/>
+<wire x1="28.067" y1="85.344" x2="29.21" y2="84.201" width="1.016" layer="1"/>
+<via x="29.21" y="84.201" extent="1-16" drill="1.1"/>
+<wire x1="29.21" y1="84.201" x2="29.21" y2="75.819" width="1.016" layer="16"/>
+<wire x1="29.21" y1="75.819" x2="28.067" y2="74.676" width="1.016" layer="16"/>
+<wire x1="28.067" y1="74.676" x2="28.067" y2="68.961" width="1.016" layer="16"/>
+<wire x1="28.067" y1="68.961" x2="27.559" y2="68.453" width="1.016" layer="16"/>
 </signal>
 <signal name="N$182">
 <contactref element="R60" pad="1"/>
@@ -5045,18 +4944,6 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="83.058" y1="11.811" x2="83.351" y2="12.104" width="0.2032" layer="1"/>
 <wire x1="83.351" y1="12.104" x2="84.1141" y2="12.104" width="0.2032" layer="1"/>
 </signal>
-<signal name="BATT_GND">
-<polygon width="0.2032" layer="1" thermals="no">
-<vertex x="13.335" y="76.835"/>
-<vertex x="16.129" y="76.835"/>
-<vertex x="16.129" y="75.057"/>
-<vertex x="14.859" y="73.787"/>
-<vertex x="12.7" y="73.787"/>
-<vertex x="12.7" y="74.422"/>
-<vertex x="13.208" y="74.93"/>
-<vertex x="13.208" y="76.708"/>
-</polygon>
-</signal>
 <signal name="VBATT_RAW">
 <contactref element="Q18" pad="1"/>
 <contactref element="Q18" pad="6"/>
@@ -5384,7 +5271,6 @@ Please make sure your boards conform to these design rules.</description>
 <contactref element="U$28" pad="14"/>
 <contactref element="U$10" pad="4"/>
 <contactref element="L2" pad="2"/>
-<contactref element="IC2" pad="14"/>
 <contactref element="C23" pad="+"/>
 <wire x1="85.471" y1="19.685" x2="84.289" y2="19.685" width="0.254" layer="1"/>
 <wire x1="83.22" y1="19.685" x2="85.471" y2="19.685" width="0.254" layer="16"/>
@@ -5620,7 +5506,6 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="8.509" y1="44.069" x2="8.763" y2="43.815" width="0.4064" layer="1"/>
 <wire x1="3.683" y1="44.069" x2="8.509" y2="44.069" width="0.4064" layer="1"/>
 <wire x1="3.683" y1="44.069" x2="3.683" y2="46.3804" width="0.4064" layer="1"/>
-<wire x1="3.683" y1="46.3804" x2="3.7846" y2="46.482" width="0.4064" layer="1"/>
 <wire x1="13.716" y1="61.214" x2="23.241" y2="61.214" width="0.4064" layer="16"/>
 <wire x1="23.241" y1="61.214" x2="23.749" y2="60.706" width="0.4064" layer="16"/>
 <wire x1="14.263" y1="58.586" x2="14.263" y2="60.667" width="0.4064" layer="16"/>
@@ -7519,29 +7404,6 @@ Please make sure your boards conform to these design rules.</description>
 <via x="70.993" y="23.241" extent="1-16" drill="0.381"/>
 <via x="59.817" y="23.368" extent="1-16" drill="0.381"/>
 </signal>
-<signal name="ARM_SPARE7_1.8V">
-<contactref element="U$16" pad="GPIO68_L_FCLK"/>
-<contactref element="U10" pad="8"/>
-<wire x1="43.257" y1="41.198" x2="44.215" y2="41.198" width="0.2032" layer="1"/>
-<wire x1="42.926" y1="41.529" x2="43.257" y2="41.198" width="0.2032" layer="1"/>
-<wire x1="40.513" y1="41.529" x2="42.926" y2="41.529" width="0.2032" layer="1"/>
-<wire x1="40.132" y1="41.148" x2="40.513" y2="41.529" width="0.2032" layer="1"/>
-<wire x1="39.497" y1="41.148" x2="40.132" y2="41.148" width="0.2032" layer="1"/>
-<wire x1="39.116" y1="40.767" x2="39.497" y2="41.148" width="0.2032" layer="1"/>
-<wire x1="39.116" y1="40.259" x2="39.116" y2="40.767" width="0.2032" layer="1"/>
-<wire x1="38.989" y1="40.132" x2="39.116" y2="40.259" width="0.2032" layer="1"/>
-<wire x1="30.48" y1="40.132" x2="38.989" y2="40.132" width="0.2032" layer="1"/>
-<wire x1="17.526" y1="40.132" x2="30.48" y2="40.132" width="0.2032" layer="16"/>
-<wire x1="17.399" y1="40.005" x2="17.526" y2="40.132" width="0.2032" layer="16"/>
-<wire x1="17.399" y1="31.623" x2="17.399" y2="40.005" width="0.2032" layer="16"/>
-<wire x1="17.78" y1="31.242" x2="17.399" y2="31.623" width="0.2032" layer="16"/>
-<wire x1="15.877" y1="28.601" x2="16.663" y2="28.601" width="0.2032" layer="1"/>
-<wire x1="16.663" y1="28.601" x2="16.764" y2="28.702" width="0.2032" layer="1"/>
-<wire x1="16.764" y1="28.702" x2="16.764" y2="30.226" width="0.2032" layer="1"/>
-<wire x1="16.764" y1="30.226" x2="17.78" y2="31.242" width="0.2032" layer="1"/>
-<via x="30.48" y="40.132" extent="1-16" drill="0.381"/>
-<via x="17.78" y="31.242" extent="1-16" drill="0.381"/>
-</signal>
 <signal name="ARM_SPARE8_1.8V">
 <contactref element="U$16" pad="GPIO67_L_LCLK"/>
 <contactref element="U10" pad="9"/>
@@ -7734,19 +7596,6 @@ Please make sure your boards conform to these design rules.</description>
 <wire x1="21.123" y1="29.251" x2="22.477" y2="29.251" width="0.2032" layer="1"/>
 <wire x1="19.939" y1="28.067" x2="21.123" y2="29.251" width="0.2032" layer="1"/>
 </signal>
-<signal name="ARM_SPARE7">
-<contactref element="U10" pad="13"/>
-<contactref element="JP4" pad="2"/>
-<wire x1="19.812" y1="24.13" x2="19.939" y2="24.257" width="0.2032" layer="1"/>
-<wire x1="15.113" y1="24.13" x2="19.812" y2="24.13" width="0.2032" layer="1"/>
-<wire x1="14.732" y1="23.749" x2="15.113" y2="24.13" width="0.2032" layer="1"/>
-<wire x1="14.732" y1="22.225" x2="14.732" y2="23.749" width="0.2032" layer="1"/>
-<wire x1="19.939" y1="24.257" x2="19.939" y2="26.543" width="0.2032" layer="1"/>
-<wire x1="19.939" y1="26.543" x2="20.32" y2="26.924" width="0.2032" layer="1"/>
-<wire x1="20.32" y1="26.924" x2="20.32" y2="27.94" width="0.2032" layer="1"/>
-<wire x1="20.981" y1="28.601" x2="22.477" y2="28.601" width="0.2032" layer="1"/>
-<wire x1="20.32" y1="27.94" x2="20.981" y2="28.601" width="0.2032" layer="1"/>
-</signal>
 <signal name="ARM_SPARE8">
 <contactref element="U10" pad="12"/>
 <contactref element="JP4" pad="1"/>
@@ -8848,6 +8697,60 @@ Please make sure your boards conform to these design rules.</description>
 <via x="27.559" y="76.708" extent="1-16" drill="0.6"/>
 <via x="15.367" y="56.134" extent="1-16" drill="0.6"/>
 <via x="20.828" y="63.754" extent="1-16" drill="0.6"/>
+<contactref element="U10" pad="13"/>
+<contactref element="JP4" pad="2"/>
+<wire x1="19.812" y1="24.13" x2="19.939" y2="24.257" width="0.2032" layer="1"/>
+<wire x1="15.113" y1="24.13" x2="19.812" y2="24.13" width="0.2032" layer="1"/>
+<wire x1="14.732" y1="23.749" x2="15.113" y2="24.13" width="0.2032" layer="1"/>
+<wire x1="14.732" y1="22.225" x2="14.732" y2="23.749" width="0.2032" layer="1"/>
+<wire x1="19.939" y1="24.257" x2="19.939" y2="26.543" width="0.2032" layer="1"/>
+<wire x1="19.939" y1="26.543" x2="20.32" y2="26.924" width="0.2032" layer="1"/>
+<wire x1="20.32" y1="26.924" x2="20.32" y2="27.94" width="0.2032" layer="1"/>
+<wire x1="20.981" y1="28.601" x2="22.477" y2="28.601" width="0.2032" layer="1"/>
+<wire x1="20.32" y1="27.94" x2="20.981" y2="28.601" width="0.2032" layer="1"/>
+<wire x1="9.271" y1="56.134" x2="6.858" y2="53.721" width="0.2032" layer="16"/>
+<wire x1="6.858" y1="53.721" x2="6.096" y2="53.721" width="0.2032" layer="16"/>
+<wire x1="6.096" y1="53.721" x2="0.762" y2="48.387" width="0.2032" layer="16"/>
+<wire x1="0.762" y1="48.387" x2="0.762" y2="24.13" width="0.2032" layer="16"/>
+<wire x1="0.762" y1="24.13" x2="1.27" y2="23.622" width="0.2032" layer="16"/>
+<wire x1="1.27" y1="23.622" x2="3.302" y2="23.622" width="0.2032" layer="16"/>
+<wire x1="3.302" y1="23.622" x2="3.683" y2="24.003" width="0.2032" layer="16"/>
+<wire x1="3.683" y1="24.003" x2="14.478" y2="24.003" width="0.2032" layer="16"/>
+<wire x1="14.478" y1="24.003" x2="14.732" y2="23.749" width="0.2032" layer="16"/>
+<wire x1="14.732" y1="23.749" x2="14.732" y2="22.225" width="0.2032" layer="16"/>
+</signal>
+<signal name="ARM_SHDN">
+<contactref element="U10" pad="8"/>
+<contactref element="R1" pad="2"/>
+<contactref element="U$16" pad="GPIO68_L_FCLK"/>
+<wire x1="43.257" y1="41.198" x2="44.215" y2="41.198" width="0.2032" layer="1"/>
+<wire x1="42.926" y1="41.529" x2="43.257" y2="41.198" width="0.2032" layer="1"/>
+<wire x1="40.513" y1="41.529" x2="42.926" y2="41.529" width="0.2032" layer="1"/>
+<wire x1="40.132" y1="41.148" x2="40.513" y2="41.529" width="0.2032" layer="1"/>
+<wire x1="39.497" y1="41.148" x2="40.132" y2="41.148" width="0.2032" layer="1"/>
+<wire x1="39.116" y1="40.767" x2="39.497" y2="41.148" width="0.2032" layer="1"/>
+<wire x1="39.116" y1="40.259" x2="39.116" y2="40.767" width="0.2032" layer="1"/>
+<wire x1="38.989" y1="40.132" x2="39.116" y2="40.259" width="0.2032" layer="1"/>
+<wire x1="30.48" y1="40.132" x2="38.989" y2="40.132" width="0.2032" layer="1"/>
+<wire x1="17.526" y1="40.132" x2="18.542" y2="40.132" width="0.2032" layer="16"/>
+<wire x1="18.542" y1="40.132" x2="30.48" y2="40.132" width="0.2032" layer="16"/>
+<wire x1="17.399" y1="40.005" x2="17.526" y2="40.132" width="0.2032" layer="16"/>
+<wire x1="17.399" y1="31.623" x2="17.399" y2="40.005" width="0.2032" layer="16"/>
+<wire x1="17.78" y1="31.242" x2="17.399" y2="31.623" width="0.2032" layer="16"/>
+<wire x1="16.663" y1="28.601" x2="16.764" y2="28.702" width="0.2032" layer="1"/>
+<wire x1="16.764" y1="28.702" x2="16.764" y2="30.226" width="0.2032" layer="1"/>
+<wire x1="16.764" y1="30.226" x2="17.78" y2="31.242" width="0.2032" layer="1"/>
+<via x="30.48" y="40.132" extent="1-16" drill="0.381"/>
+<via x="17.78" y="31.242" extent="1-16" drill="0.381"/>
+<wire x1="16.663" y1="28.601" x2="15.877" y2="28.601" width="0.2032" layer="1"/>
+<wire x1="14.947" y1="39.37" x2="14.947" y2="40.728" width="0.2032" layer="16"/>
+<wire x1="14.947" y1="40.728" x2="15.367" y2="41.148" width="0.2032" layer="16"/>
+<wire x1="15.367" y1="41.148" x2="18.669" y2="41.148" width="0.2032" layer="16"/>
+<via x="18.669" y="41.148" extent="1-16" drill="0.381"/>
+<wire x1="18.669" y1="41.148" x2="18.669" y2="39.116" width="0.2032" layer="1"/>
+<via x="18.669" y="39.116" extent="1-16" drill="0.381"/>
+<wire x1="18.669" y1="39.116" x2="18.669" y2="40.005" width="0.2032" layer="16"/>
+<wire x1="18.669" y1="40.005" x2="18.542" y2="40.132" width="0.2032" layer="16"/>
 </signal>
 </signals>
 </board>
