Starting Quadrotor¶
Quad2¶
- Turn on the transmitter first.
- Plug the battery into the quadrotor. You should hear some beeps as the quadrotor starts up.
- Turn the motor power switch to on. Be careful not to have anything, especially fingers, near the motors.
- Enable the motors by tapping the throttle down and to the right. Disable by tapping down and left.
* Don't break everything.The throttle is the left one. If you didn't know that, put the controller down and call alex.
Quad1¶
- Turn on the transmitter first.
- Turn on the power switch. You should hear three short beeps and one long beep from the ESC's.
- Enable the motors by tapping the throttle down and to the right. Disable by tapping down and left.
- Don't break everything.