Project

General

Profile

Statistics
| Branch: | Revision:

scoutece / scoutfly @ 618ca0e5

Latest revisions

# Date Author Comment
618ca0e5 03/01/2012 12:19 AM Julian Binder

Changed library to conform with voltage regulator package. Redid routing to conform to new package. Add heat dissipation area. Still need to check that this is correct. Also fixed cap values for voltage regulators.

2d30dad9 02/23/2012 09:59 PM Julian Binder

Added simple power circuit to the scoutfly reduced board. Using 2 new LDOs to regulate down to 5V and 3.3V Also removed the charging circuit, gas gauge, push button controller. Removed charge led.

b31bb146 02/23/2012 12:59 PM Julian Binder

Added a new library with a voltage regulator part. I forgot to add the Name and Value so i will do that. I also added the start of work on the reduced feature set scoutfly.

Julian

a47006da 02/15/2012 10:02 PM Ben Wasserman

Did some wire routing and part moving.

45a31aca 02/06/2012 11:29 PM Thomas Mullins

Mostly finished routing the regulator circuit

7f9670e3 02/01/2012 09:59 PM Thomas Mullins

Made a little progress on the gas gauge routing

Positioned some of the components in the gas gauge circuit, and
routed a few wires.

d6199bd9 02/01/2012 02:51 AM Abraham Levkoy

Started routing charging updated charging circuit

Routed some of charging circuit in updated Scoutfly. Modeled part
position after that on power test board. Moved diode and capacitor out
of the way to get inductor closer to charging chip. This will make it...

51698c42 01/25/2012 09:55 PM Abraham Levkoy

Fixed angle errors in Scoutfly power update.

Scoutfly power update now passes DRC.

54e8c05e 01/17/2012 12:42 AM Abraham Levkoy

Moved power parts in Scoutfly layout

Moved parts for new Scoutfly power circuit from edge of layout to their
(very) approximate final locations. Changed the battery and charger
connectors from vertical to horizontal Molex connectors.

b7bdc50b 01/16/2012 03:17 PM Abraham Levkoy

Added Scoutfly files with new power circuit

Switched Scoutfly from old power circuit to new power circuit from power
test board. Did this in a new file so that, if the power circuit turns
out to be a failure, other changes made contemporaneously to Scoutfly...

View revisions

Also available in: Atom