Project

General

Profile

Statistics
| Branch: | Revision:

scoutece @ 0f8a07ab

Name Size
  bomboard
  breakfly
  charging
  diagnostic
  flyswatter
  lbr
  scoutfly
  smartfly
.gitignore 26 Bytes

Latest revisions

# Date Author Comment
0f8a07ab 11/06/2011 09:40 AM Abraham Levkoy

Minimized possible inductive loop in power board

Moved trace driving FAULTLED to minimize area of inductive loop in
vicinity of charger.
e5134b5f 11/06/2011 09:21 AM Abraham Levkoy

Finished power board routing (first attempt)

Routed all signals on power test board. There are no airwires, and the
board passes DRC. I believe I have kept the inductive loops near the
charger pretty small, but they could probably be improved. I also made...
aa7ee9ae 11/06/2011 08:33 AM Abraham Levkoy

Partially routed charger on power test board

Routed some of the signals connected to the charger IC on the power test
board.
d468084c 11/06/2011 08:07 AM Abraham Levkoy

Routed gas gauge on power board

Routed signals attached to fuel gauge on power board.
1e62ac51 11/06/2011 03:40 AM Abraham Levkoy

Started to route LDO signals

Started routing the signals attached to one of the LDOs.
ebfa6fb9 11/06/2011 03:10 AM Abraham Levkoy

Finished routing AVR and FTDI, started pushbutton

Finished routing signals connected to AVR and FTDI on power test board.
Started routing signals attached to pushbutton controller.
8b6cb5d4 11/06/2011 01:56 AM Abraham Levkoy

Routed USB circuit and most of AVR on power board

Routed most of the signals connecting the USB port, FTDI chip, and AVR.
1a5559b0 11/05/2011 10:46 PM Abraham Levkoy

Changed USB port drill holes back to spec

Looked at mini USB port with Dan. Observed that corner drill holes are
supposed to be multiple drills right next to eachother. Decided to
change holes back to specfied radius and ignore long hole for now.
30d533fe 11/05/2011 07:05 PM Abraham Levkoy

Preliminary power board placement complete

Placed all parts on power test board in what I believe will be their
approximate final locations. No routing done yet. Board probably won't
get bigger, because I left room to grow.
9180be39 11/05/2011 06:17 PM Abraham Levkoy

Partial placement of power board

Placed AVR, FTDI chip, and USB port on power test board, along with
their accessory components. They are probably pretty close to their
final resting place but may move a little bit later.

View all revisions | View revisions

Also available in: Atom