Project

General

Profile

Statistics
| Branch: | Revision:

scoutece / scoutfly / scoutfly.brd @ 5e6a72bb

History | View | Annotate | Download (223 KB)

# Date Author Comment
0b6ae624 10/04/2010 03:35 PM Chris Mar

using 11 mil clearance, added latest gerber zip

f81c1cf2 10/02/2010 05:14 AM Chris Mar

updated scoutfly with new jst parts

8881541a 10/02/2010 12:37 AM Chris Mar

swapped jst-5 headers from right angle to vertical

f98422cf 09/29/2010 04:15 PM Chris Mar

changed accessory pin names and moved one to sonar.

f7a00d18 09/26/2010 07:38 PM Chris Mar

redid traces for front screw holes to avoid antenna. moved battery silk down.

0128ce26 09/26/2010 04:28 PM Chris Mar

added grounded srew holes to scoutfly. for review by kwoo.

561596fa 08/14/2010 03:39 AM Kevin Woo

changed the value on the accessory detect pin resistor divider to a standard value

14ab72d8 08/14/2010 03:31 AM Kevin Woo

added silk, fixed layout bugs

f397fa03 08/14/2010 02:19 AM Kevin Woo

Added some more ground planes on the unused bottom layer

3f08631a 08/14/2010 02:01 AM Kevin Woo

Layout completed. Need to fix silk

372d40a6 08/02/2010 12:50 AM Kevin Woo

Signal routing completed, power still needs to be done.

ad4c386a 08/01/2010 10:00 PM Kevin Woo

Finished layout for steppers and battery/charging contact support circuitry

b27f70a5 07/30/2010 11:00 AM Kevin Woo

Floorplan for the new stepper controller

266d88f8 07/30/2010 12:55 AM Kevin Woo

Replaced stepper controller with one that will work for our voltages, fixes to the AVR on the clock and decoupling caps

305fe76c 07/28/2010 12:21 AM Kevin Woo

AVR and BOM layout completed.

d326a8bd 07/26/2010 12:09 PM Kevin Woo

Gumstix layout mostly complete, AVR layout started. Some additional notes around the stepper driver on configuration, changes to the SPI header

fe1fe494 07/23/2010 09:32 PM Kevin Woo

Removed USB power since it would not work, simplified power area, reordered pins on the level shifters for easier layout.

75ded4fb 07/22/2010 06:07 PM Kevin Woo

Removed extraneous pullups from stepper controller

7e65c00d 07/22/2010 05:59 PM Kevin Woo

Fixed some pull up/down bugs

cffb0116 07/22/2010 12:09 AM Kevin Woo

Started layout on scoutfly, updated schematic to use gumstix

1652a76c 05/01/2010 02:26 AM Kevin Woo

Copied old atmel version of the scoutfly to the current version

95f0c096 05/01/2010 02:20 AM Kevin Woo

Backed up the scoutfly atmel version in the repo

caddc018 02/07/2010 12:14 AM Kevin Woo

Fixed issues with non-standard resistor values

4048af80 01/29/2010 09:21 PM Kevin Woo

Fixed error in smybol for the Power OR controllers where the FET's drain only had 1 out of 6 connections. Finished redoing the floorplan on the Power OR section. Routing done for the top and bottom layers. Only need to do the power plane level now.

7fd8a260 01/29/2010 04:21 PM Kevin Woo

Routed some power planes. Started on the power OR controllers but need to redo floorplan.

d4df41c7 01/29/2010 02:46 PM Kevin Woo

Added SPI lines to the wireless chip and the control lines. Replaced standoff terminals with the Sparkfun parts which have better keepouts for the screwheads.

5daf8060 01/29/2010 12:22 PM Kevin Woo

Routed all signal wires out of the ARM. Still need to do final connections. Moved flash jumpers and debug port around to facilitate routing

ca9f70ed 01/28/2010 11:43 PM Kevin Woo

Finished routing PSU, user buttons, fixed a bug in tolerances in the wireless chip.

b9c74451 01/28/2010 07:09 PM Kevin Woo

Reorganized the I2C pins on the FFC. Routed I2C and the I2C levelshifter. Finished the PSU poly pours except for the VCC pour. The Motor current limiters are laid out except for the VCC connection. Hooked up the wireless chips except SPI. Added a mounting hole for the BOM board.

a5862daf 01/28/2010 04:34 PM Kevin Woo

Some PSU routing, WL chip except external signals is done. Fixed resistor size (package) for the MAX745 battery charger

14570329 01/27/2010 10:58 PM Kevin Woo

ORB and button wiring, some UART stuff.

e91ddfc2 01/27/2010 03:06 AM Kevin Woo

Routed AVR, motor drivers, JTAG, USB ports, debug UART and some of the decoupling caps across the board.

f9b43048 01/26/2010 07:43 PM Kevin Woo

Initial commit of the unfinished scout board and the current scout library