Colony Scout: Issueshttps://roboticsclub.org/redmine/https://roboticsclub.org/redmine/redmine/favicon.ico2011-11-07T21:48:08ZRobotics Club
Redmine Task #1907 (Assigned): Check speaker magnet interference with IMU/Compasshttps://roboticsclub.org/redmine/issues/19072011-11-07T21:48:08ZDan Shopedshope@andrew.cmu.edu
<p>Will placing a small speaker near the compass (less than 1" away) cause interference due to the magnetic fields?</p>
<p>If so, how can we mitigate this? - Calculations, numerical values of separation, etc.</p> Task #1895 (New): Control Headlightshttps://roboticsclub.org/redmine/issues/18952011-10-29T21:52:26ZPriyanka Deo
<p>Write functions to control the headlights (turn on, off, set color) from the ARM.</p> Task #1879 (Assigned): Buttons on ARMhttps://roboticsclub.org/redmine/issues/18792011-10-26T20:46:26ZPriyanka Deo
<p>Read button values. Publish to topic.</p> Task #1875 (Assigned): CliffSensor on ARMhttps://roboticsclub.org/redmine/issues/18752011-10-26T19:12:33ZPriyanka Deo
<p>Read cliffsensor values on ARM. Publish to topic.</p> Task #1867 (Assigned): Charging Basehttps://roboticsclub.org/redmine/issues/18672011-10-23T08:01:57ZPriyanka Deo
<p>Design and Create charging base so we can charge scout</p> Task #1864 (Assigned): "Automated" Turninghttps://roboticsclub.org/redmine/issues/18642011-10-23T07:01:24ZPriyanka Deo
<p>Using feedback from gyroscope and encoders in order to track position change, estimate PWM setpoints to make user requested turn.</p> Task #1862 (Assigned): Control Motors (ARM)https://roboticsclub.org/redmine/issues/18622011-10-23T06:57:34ZPriyanka Deo
<p>Set PWM outputs on appropriate pins. Control motors using ARM</p> Task #1855 (Assigned): Automate Stepping and Sonar Readinghttps://roboticsclub.org/redmine/issues/18552011-10-23T06:50:43ZPriyanka Deo
<p>Call stepper moving and sonar triggering function so that Sonar steps then reads then steps again. Does not blur readings by stepping to early.</p> Task #1850 (Assigned): BOM Driver Codehttps://roboticsclub.org/redmine/issues/18502011-10-23T06:39:37ZPriyanka Deo
<p>functions for encoding and decoding using modified Sharp protocol @ 38Hz modulation. Requires decision regarding scheduling, RTOS on AVR. Test what robot/sensor is communicating based on transmitted data.</p> Task #1847 (Assigned): BOM Interference Testinghttps://roboticsclub.org/redmine/issues/18472011-10-23T06:36:10ZPriyanka Deo
<p>Construct a test unit w/ 2 transmitters firing at a single receiver (all can be on same processor). can trigger LEDs corresponding to left or right transmitter</p> Task #1830 (Assigned): Create ROS Node: Analoghttps://roboticsclub.org/redmine/issues/18302011-10-13T22:18:17ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the analog. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p> Task #1822 (Assigned): Create ROS Node: Accessoryhttps://roboticsclub.org/redmine/issues/18222011-10-13T22:02:05ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the accessory. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p>
<p>Because we're going to be making a forklift as the first accessory, it might be a good idea to make this a forklift node instead of a generic accessory node.</p> Task #1494 (Assigned): Assembly Instructionshttps://roboticsclub.org/redmine/issues/14942010-10-11T04:27:19ZDan Shopedshope@andrew.cmu.edu
<p>Update <a class="wiki-page" href="https://roboticsclub.org/redmine/projects/colonyscout/wiki/AssemblyInstructions">AssemblyInstructions</a> with pictures for each step</p> Task #1478 (Assigned): BOM Send/Receive Functionshttps://roboticsclub.org/redmine/issues/14782010-10-05T03:35:41ZDan Shopedshope@andrew.cmu.edu
<p>develop a function for parsing input using the Sharp 38khz protocol</p>
<p>code is running on the ATMega128RFA1. Consult the scoutfly schematic for more details</p>
<p>Sharp Protocol<br /><a class="external" href="http://www.roboticsclub.org/redmine/projects/colonyscout/wiki/Built-in_RBOM">http://www.roboticsclub.org/redmine/projects/colonyscout/wiki/Built-in_RBOM</a>\<br /><a class="external" href="http://www.sbprojects.com/knowledge/ir/sharp.htm">http://www.sbprojects.com/knowledge/ir/sharp.htm</a></p>
<p>Example code<br /><a class="external" href="http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html">http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html</a></p>
<p>Hardware<br />Receiver: <a class="external" href="http://www.vishay.com/docs/82090/tsop48xx.pdf">http://www.vishay.com/docs/82090/tsop48xx.pdf</a><br />Emitter: <a class="external" href="http://www.newark.com/vishay-semiconductor/tsal6200/ir-emitting-diode/dp/95B4858">http://www.newark.com/vishay-semiconductor/tsal6200/ir-emitting-diode/dp/95B4858</a></p> Task #523 (Assigned): Colony Environmenthttps://roboticsclub.org/redmine/issues/5232009-08-05T20:11:41ZDan Shopedshope@andrew.cmu.edu
<p>Design colony environment storage cabinet for under main shop table. Shop master has approved usage of the under-table area.</p>
<p>The other area considered for storage is beside Shelfimus Prime -- this would require relocation of the wire storage (on the side of the cabinet) and hexabot (unknown).</p>