Colony Scout: Issueshttps://roboticsclub.org/redmine/https://roboticsclub.org/redmine/redmine/favicon.ico2011-11-13T04:46:19ZRobotics Club
Redmine Task #1920 (Assigned): Get Old Boards and Funding Infohttps://roboticsclub.org/redmine/issues/19202011-11-13T04:46:19ZPriyanka Deo
<p>Talk to Brian Kirby and ask him for the 10 or so new & populated colony III boards he has, so we can swap them with the old ones.</p>
<p>And how/where he got funding to make the colony III fleet.</p> Task #1919 (Assigned): Power Up Rest of Scoutflyhttps://roboticsclub.org/redmine/issues/19192011-11-13T04:44:41ZPriyanka Deo
<p>Power Up/ Test Rest of scoutfly, while waiting for power boards to come back.<br />From KWoo's email:</p>
<p>You can probably power everything up. You will have to jury rig a reset line to the AVR but otherwise you should be able to test out the boards. You need to bypass the power path chip and always assert the enable line on the regulator. Other than that you will get out 5V and 3.3V. That should allow you to power everything else on the board, assuming that it works (I [KWoo] didn't test that part).</p> Task #1907 (Assigned): Check speaker magnet interference with IMU/Compasshttps://roboticsclub.org/redmine/issues/19072011-11-07T21:48:08ZDan Shopedshope@andrew.cmu.edu
<p>Will placing a small speaker near the compass (less than 1" away) cause interference due to the magnetic fields?</p>
<p>If so, how can we mitigate this? - Calculations, numerical values of separation, etc.</p> Task #1877 (Assigned): Wireless on ARMhttps://roboticsclub.org/redmine/issues/18772011-10-26T20:43:39ZPriyanka Deo
<p>Control wireless broadcasts using ARM</p> Task #1873 (Assigned): ROSSERIAL on ARMhttps://roboticsclub.org/redmine/issues/18732011-10-26T19:07:33ZPriyanka Deo
<p>Find out how ROSSERIAL works. Implement it on ARM.</p> Task #1862 (Assigned): Control Motors (ARM)https://roboticsclub.org/redmine/issues/18622011-10-23T06:57:34ZPriyanka Deo
<p>Set PWM outputs on appropriate pins. Control motors using ARM</p> Task #1852 (Assigned): Get Sonar Stepping and Readinghttps://roboticsclub.org/redmine/issues/18522011-10-23T06:48:08ZPriyanka Deo
<p>Command stepper driver to step and set direction bits. Trigger sonar by setting output pin to high (momentarily). Delay stepper movement to allow sonar reading (<49ms)</p> Task #1851 (Assigned): Sonar Wiringhttps://roboticsclub.org/redmine/issues/18512011-10-23T06:46:44ZPriyanka Deo
<p>1. wire stepper to stepper driver outputs, sonar to trigger pin</p>
<p>2. wire homing switch to input pin</p>
<p>3. wire sonar to AVR input</p> Task #1847 (Assigned): BOM Interference Testinghttps://roboticsclub.org/redmine/issues/18472011-10-23T06:36:10ZPriyanka Deo
<p>Construct a test unit w/ 2 transmitters firing at a single receiver (all can be on same processor). can trigger LEDs corresponding to left or right transmitter</p> Task #1829 (Assigned): Create ROS Node: BOMhttps://roboticsclub.org/redmine/issues/18292011-10-13T22:16:40ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the BOM. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p> Task #1828 (Assigned): Create ROS Node: Cliffsensorshttps://roboticsclub.org/redmine/issues/18282011-10-13T22:07:04ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the cliffsensors. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p> Task #1822 (Assigned): Create ROS Node: Accessoryhttps://roboticsclub.org/redmine/issues/18222011-10-13T22:02:05ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the accessory. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p>
<p>Because we're going to be making a forklift as the first accessory, it might be a good idea to make this a forklift node instead of a generic accessory node.</p> Task #1818 (Assigned): Create ROS Node: Timerhttps://roboticsclub.org/redmine/issues/18182011-10-13T21:55:16ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the timer. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node diagram can be found at <a class="external" href="https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf">https://www.roboticsclub.org/redmine/attachments/522/rosNodes2.pdf</a>.</p> Task #1817 (Assigned): Create ROS Node: Buttonshttps://roboticsclub.org/redmine/issues/18172011-10-13T21:51:34ZBen Wassermanbwasserm@andrew.cmu.edu
<p>Create the ROS node for the buttons. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos</p> Task #1727 (Assigned): Update Boards on Eaglehttps://roboticsclub.org/redmine/issues/17272011-05-03T23:06:35ZPriyanka Deo
<p>Make changes on Eagle that have been made to the boards.</p>