Colony Scout: Issueshttps://roboticsclub.org/redmine/https://roboticsclub.org/redmine/redmine/favicon.ico2010-01-14T01:20:52ZRobotics Club
Redmine Bug #985 (Fixed): Add RX/TX UART pin bypass to the AVR for debugginghttps://roboticsclub.org/redmine/issues/9852010-01-14T01:20:52ZKevin WooBug #984 (Fixed): Add ffc connectors to the board to replace cgridshttps://roboticsclub.org/redmine/issues/9842010-01-14T01:07:11ZKevin WooBug #983 (Fixed): Add micro a/b usb-otg connectorhttps://roboticsclub.org/redmine/issues/9832010-01-14T00:58:42ZKevin WooBug #982 (Fixed): Add UART for the BOMhttps://roboticsclub.org/redmine/issues/9822010-01-14T00:51:06ZKevin WooBug #981 (Fixed): Modify accessory portshttps://roboticsclub.org/redmine/issues/9812010-01-14T00:48:39ZKevin Woo
<p>Add 1 ADC, remove second accessory port.</p> Task #976 (Fixed): Scoutfly Connectorshttps://roboticsclub.org/redmine/issues/9762010-01-12T16:42:23ZDan Shopedshope@andrew.cmu.edu
<p>Find 40+pin FFC (flexible flat cable) connector and cable (4+" length)<br />Find as inexpensive as possible (<$5 ideal)</p> Task #975 (Wontfix): Hood Buttonshttps://roboticsclub.org/redmine/issues/9752010-01-12T10:34:34ZDan Shopedshope@andrew.cmu.edu
<p>Once dev board layout is finalized (for dev), design buttons and determine placement on hood piece.</p>
<p>Buttons may be 3D printed and manually cast with Freeman Repro Urethane or similar product.<br /><a class="external" href="http://www.miapoxy.com/c-4-urethane-casting-resins.aspx">http://www.miapoxy.com/c-4-urethane-casting-resins.aspx</a></p> Task #974 (Fixed): Accessory Ball Bearinghttps://roboticsclub.org/redmine/issues/9742010-01-12T10:32:16ZDan Shopedshope@andrew.cmu.edu
<p>Add block for ball bearing and choose part<br />Recommend 0.250" ID, plain vanilla ball bearing (read: cheap) or use simple journal bearing</p> Task #973 (Fixed): Share schematic + board on dropbox with danhttps://roboticsclub.org/redmine/issues/9732010-01-12T00:30:42ZKevin WooEnhancement #972 (Fixed): Replace RF chip crystal with smaller oscillatorhttps://roboticsclub.org/redmine/issues/9722010-01-11T03:57:49ZKevin Woo
<p><a class="external" href="http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=535-10013-1-ND">http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=535-10013-1-ND</a></p>
<p>is 100 x 100 mils</p> Task #970 (Fixed): Find all resistors we needhttps://roboticsclub.org/redmine/issues/9702010-01-11T03:55:03ZKevin Woo
<p>0603 unless it can't withstand the power disspation</p> Task #969 (Fixed): Look for smaller ethernet connectorhttps://roboticsclub.org/redmine/issues/9692010-01-10T21:06:11ZKevin Woo
<p>Current one takes up a significant amount of room on the board</p> Task #968 (Fixed): Double-check Resistor Divider Valueshttps://roboticsclub.org/redmine/issues/9682010-01-10T20:59:45ZKevin Woo
<p>Some may be reversed</p> Task #967 (Fixed): Double-check IC Footprintshttps://roboticsclub.org/redmine/issues/9672010-01-10T20:59:08ZKevin Woo
<p>Some may be reversed</p> Task #844 (Wontfix): Bootloaderhttps://roboticsclub.org/redmine/issues/8442009-10-29T23:49:28ZDan Shopedshope@andrew.cmu.edu
1) Bootloader
<ul>
<li>can we boot on an ARM</li>
<li>how small can we get it</li>
<li>Can we do it on the 256K SRAM onboard?</li>
</ul>