Colony Scout: Issueshttps://roboticsclub.org/redmine/https://roboticsclub.org/redmine/redmine/favicon.ico2011-10-11T16:05:34ZRobotics Club
Redmine Bug #1806 (Wontfix): Gumstix Memory Changehttps://roboticsclub.org/redmine/issues/18062011-10-11T16:05:34ZDan Shopedshope@andrew.cmu.edu
<p>FYI, new Gumstix boards have changed hardware<br /><a class="external" href="http://www.gumstix.org/hardware-design/product-changes-known-issues-a-eol/66-product-change-notices/196-2011-product-change-notices.html">http://www.gumstix.org/hardware-design/product-changes-known-issues-a-eol/66-product-change-notices/196-2011-product-change-notices.html</a></p>
<p>The current image will not boot on these devices. Find out what we need to do to make the new hardware bootable.</p> Task #1514 (Wontfix): Powdercoating from Electro-kotehttps://roboticsclub.org/redmine/issues/15142010-10-14T13:23:48ZDan Shopedshope@andrew.cmu.edu
<p>Used <a class="external" href="http://www.electro-kote.com/">http://www.electro-kote.com/</a> this summer with NREC -- see if they'll paint our parts for free</p>
<p>Do black on everything except rear cover. If possible matte black on chassis baseplates, gloss everywhere else</p> Task #1480 (Wontfix): Find red Powder Coatinghttps://roboticsclub.org/redmine/issues/14802010-10-05T06:10:33ZDan Shopedshope@andrew.cmu.edu
<p>purchase red <a class="external" href="http://powderbuythepound.com/catalog/images/candyredweb.jpg">http://powderbuythepound.com/catalog/images/candyredweb.jpg</a> powder coat, or find out if Jason Meredith is supplying.</p> Task #1431 (Wontfix): Spec front air filter foamhttps://roboticsclub.org/redmine/issues/14312010-09-22T01:15:20ZDan Shopedshope@andrew.cmu.edu
<p>Front side panels are covered (inside) with open cell foam (gray/black). Find a thin foam suitable for some dust protection, possibly removable for cleaning?</p> Task #975 (Wontfix): Hood Buttonshttps://roboticsclub.org/redmine/issues/9752010-01-12T10:34:34ZDan Shopedshope@andrew.cmu.edu
<p>Once dev board layout is finalized (for dev), design buttons and determine placement on hood piece.</p>
<p>Buttons may be 3D printed and manually cast with Freeman Repro Urethane or similar product.<br /><a class="external" href="http://www.miapoxy.com/c-4-urethane-casting-resins.aspx">http://www.miapoxy.com/c-4-urethane-casting-resins.aspx</a></p> Task #844 (Wontfix): Bootloaderhttps://roboticsclub.org/redmine/issues/8442009-10-29T23:49:28ZDan Shopedshope@andrew.cmu.edu
1) Bootloader
<ul>
<li>can we boot on an ARM</li>
<li>how small can we get it</li>
<li>Can we do it on the 256K SRAM onboard?</li>
</ul> Task #843 (Wontfix): Research POEhttps://roboticsclub.org/redmine/issues/8432009-10-29T23:14:13ZDan Shopedshope@andrew.cmu.edu
<p>POE. Peewie</p>