Project

General

Profile

Activity

From 09/03/2010 to 10/02/2010

10/03/2010

08:02 PM Revision 0cae467a (scoutece): Added website silk and moved vias away from silk labels
Dan Shope

10/02/2010

05:01 PM Revision 556b570c (scoutece): Rerouted traces for aesthetics
Dan Shope
04:24 PM Revision b89112d4 (scoutece): Revised to pass DRC, added top ground plane and connecting vias
Dan Shope
02:02 PM Bug #1459 (Fixed): resize breakfly power traces
Dan Shope
05:29 AM Bug #1459 (Fixed): resize breakfly power traces
should be 10-16mils Dan Shope
06:58 AM Revision a6d3ef7d (scoutece): Changed power traces to 16mil, refined layout
Dan Shope
06:04 AM Revision d0414ffa (colonymech): Added Breakfly board connectors and updated rear assembly for bre...
Dan Shope
05:27 AM Revision 73a9bda8 (scoutece): Changed trace width to 8mil as per BatchPCB DRC, changed stepper to...
Dan Shope
05:14 AM Revision a29d1267 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
05:14 AM Revision f81c1cf2 (scoutece): updated scoutfly with new jst parts
Chris Mar
05:13 AM Revision 03cd303f (scoutece): updated silk on jst parts
Chris Mar
03:53 AM Revision 3d87cfc5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
03:53 AM Revision 8816f777 (scoutece): All components routed, first pass. Needs cleaned up and final silk ...
Dan Shope
03:17 AM Revision d728c9d0 (scoutece): updated gitignore for temp library files
Chris Mar
02:27 AM Revision 6bcb5074 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
02:27 AM Revision 2ca21076 (scoutece): added JST_6 VERT part
Chris Mar
02:23 AM Revision f8575683 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
02:22 AM Revision 23f3c5b5 (scoutece): Started routing, all but sonar and stepper.
Dan Shope
01:25 AM Bug #1455 (Fixed): Rename Edge Detector silk
Turns out that the cliff sensors are actually button headers, so I redid the silk. Chris Mar
12:45 AM Bug #1455: Rename Edge Detector silk
Silk done.
The cliff sensor headers are not evenly spaced. Fix?
Chris Mar
12:46 AM Bug #1443: Investigate non-RA JST Headers
Part changed to vertical on scoutfly. Chris Mar
12:45 AM Bug #1443 (Fixed): Investigate non-RA JST Headers
Chris Mar
12:37 AM Revision 8881541a (scoutece): swapped jst-5 headers from right angle to vertical
Chris Mar
10:06 PM Revision c3058e17 (scoutece): Added .gitignore file to ignore Eagle temp files
Dan Shope
09:56 PM Revision 5b9e82f5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
09:55 PM Revision 5656b5b1 (scoutece): Added silk and mounting holes
Dan Shope
08:50 PM Revision 852fef4c (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Kevin Woo
08:50 PM Revision 6a759754 (scoutece): Roboclub logo library
Kevin Woo

10/01/2010

03:57 PM Bug #1455 (Fixed): Rename Edge Detector silk
On Scoutfly -- rename Edge Detectors to CLIFF0, CLIFF1, CLIFF2.
Cliff 0 is the front sensor, I believe this is lab...
Dan Shope
03:52 PM Task #999 (Fixed): Colony III Members
Dan Shope
03:51 PM Task #974 (Fixed): Accessory Ball Bearing
Dan Shope
03:51 PM Bug #1096 (Fixed): Orb Reflectors
Dan Shope
03:51 PM Bug #1385 (Fixed): Scoutfly mounting holes to ground plane
Dan Shope
03:50 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
Dan Shope
03:50 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
Dan Shope
02:14 PM Revision c1e53ab6 (scoutece): Added 5x2 accessory header and placed components
Dan Shope
04:44 AM Revision 53f8278b (scoutece): Added board perimeter, consolidated power connectors
Dan Shope
02:10 AM Revision c2b99a7d (scoutece): Revised header placement on breafkly for more efficent routing
Dan Shope
12:03 AM Revision 4049ea60 (scoutece): Renamed board to breakfly.sch
Dan Shope
08:51 PM Revision 8403f0b7 (scoutece): Added breakfly diagram
Dan Shope

09/30/2010

05:15 PM Revision f0540dcf (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
05:07 PM Revision 7dd29004 (scoutece): initial commit jst-based breakfly board
unknown
04:32 PM Revision 03b2958c (scoutece): Renamed (molex cgrid) Breakfly schematic to breakfly_old. Starting ...
Dan Shope
02:39 AM Revision c186ea43 (colonymech): Added JST connectors, Revised Breakfly with JST connectors. Chang...
Dan Shope
11:22 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
Chris Mar

09/29/2010

04:39 PM Revision ae2e5bab (scoutece): updated kwoo.lbr with vertical package to jst_5
Chris Mar
04:15 PM Revision f98422cf (scoutece): changed accessory pin names and moved one to sonar.
Chris Mar
12:43 PM Revision b3c037bf (colonymech): New: Alex Munoz headlight cover. Modified Breakfly model, added F...
Dan Shope

09/27/2010

05:27 AM Revision 9330ec5f (colonymech): Added rear BOM, fasteners to all holes. Modified charging contact...
Dan Shope
10:01 PM Revision 2dc2cb18 (colonymech): Added routing for FFC, Adjusted front side panel cutout aesthetic...
Dan Shope

09/26/2010

07:38 PM Revision f7a00d18 (scoutece): redid traces for front screw holes to avoid antenna. moved battery ...
Chris Mar
05:51 PM Revision 63a38060 (scoutece): 4 Layer, 6mil trace/width, 15mil drill minimum drc file
Kevin Woo
04:29 PM Revision 6f1fca09 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
04:28 PM Revision 0128ce26 (scoutece): added grounded srew holes to scoutfly. for review by kwoo.
Chris Mar
03:52 PM Bug #1442: Scoutfly - Add Grounded Screw Holes
Coordinates:
(150, 3350) (4350,3350)
(150,150) (4350,150)
Chris Mar
03:12 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
Add vias connected to ground
- .116 drill hole
- .179 pad diameter
- .250 diameter clearance for ring terminal
...
Chris Mar
03:20 PM Bug #1443 (Fixed): Investigate non-RA JST Headers
What kind of footprint for vertical JST headers on right side of board? Chris Mar
03:10 PM Bug #1441 (Fixed): Scoutfly - Change resistor and capacitor values for BOM detector
Resistors: 100 ohm
Capacitors: 0.1 uF
Chris Mar
03:08 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
Chris Mar
02:30 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
currently is 481ohms
we are sourcing 487ohm parts instead, so update values to reflect this change.
Dan Shope
05:04 AM Revision 0dbdf2f6 (colonymech): Detailed Scoutfly board. Remade wheel file for rendering
Dan Shope
10:26 PM Revision 7fda2a22 (colonymech): Integrated front and side BOM sensors
Dan Shope
08:13 PM Revision d6c139ef (colonymech): Added front BOM using TSOP4838 and TSAL6200 sensors.
Dan Shope

09/25/2010

02:04 PM Revision a97a8df0 (colonymech): Added rear bushing and created retaining barrier for charging con...
Dan Shope
01:21 PM Task #974: Accessory Ball Bearing
Using http://www.mcmaster.com/#sleeve-bearings/=903cbo
Flange on bottom of chassis, extending up into a press-fit ...
Dan Shope
05:42 AM Revision 75171b71 (colonymech): Created Breakfly model and selected accessory header
Dan Shope
09:40 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
Why do you need <EOM> on a ticket name....unnecessary...
Latest pushed.
Kevin Woo
09:39 PM Revision 4ce7e37d (scoutece): Latest version of the library containing most of the scout parts
Kevin Woo

09/24/2010

01:03 PM Task #1425 (Fixed): Find new battery supplier
Dan Shope
01:02 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
Dan Shope
12:58 PM Revision bd96ce91 (colonymech): Prepped files for 3D printing. Added homing switch to stepper cover.
Dan Shope

09/23/2010

06:07 PM Revision 7fda8756 (colonymech): Added supports for front hood and circuit board mounting.
Dan Shope
04:38 AM Revision be6126b8 (colonymech): Updated stepper cover. Fixed interferences in sonar cover
unknown
04:00 AM Revision a3525daa (colonymech): Added stepper homing cover. 1 sheet metal version, 1 plastic vers...
unknown

09/22/2010

04:59 PM Revision 3a90bae3 (colonymech): Added cover for sonar boards
unknown
01:58 AM Revision 94564c47 (colonymech): Added Archives and Accessories. Updated rear chassis
unknown
12:49 AM Revision 506bf0d9 (colonymech): Initial commit of SolidWorks CAD model
unknown
09:25 PM Task #1425: Find new battery supplier
Looking for 1.35" x 1.35" x 2.5" battery. We can accommodate a longer battery (up to 4.5" long) or a shorter battery ... Dan Shope
09:22 PM Task #1425: Find new battery supplier
Closest to cost is: ($22.95 vs the old battery cost of $19.95). Note the spec is now only 3.0Ah, instead of 4.0Ah
ht...
Dan Shope
09:16 PM Task #818 (Fixed): Battery Testing
Dan Shope
09:15 PM Task #1431 (Wontfix): Spec front air filter foam
Front side panels are covered (inside) with open cell foam (gray/black). Find a thin foam suitable for some dust prot... Dan Shope
09:13 PM Task #844 (Wontfix): Bootloader
Dan Shope
09:13 PM Bug #1096: Orb Reflectors
Attach to inside of hood Dan Shope
09:13 PM Task #1098 (Wontfix): ask aaron and cornell about arm stuff
Dan Shope
09:13 PM Task #1381 (Fixed): acquire ATMega 128RFA1 chips
Dan Shope

09/21/2010

01:19 AM Task #1425: Find new battery supplier
Emailed BatterySpace.com about making a custom pack for us: NO DICE
Hi Dan,
Thanks for the inquiry.
The ba...
Dan Shope

09/19/2010

02:19 PM Task #1425 (Fixed): Find new battery supplier
BatterySpace.com no longer offers the Scout battery, and all comparable products are nearly 2x in price
http://www...
Dan Shope
 

Also available in: Atom