Project

General

Profile

Activity

From 01/23/2010 to 02/21/2010

02/22/2010

08:46 PM Task #1117 (Assigned): Reflow Oven Temperature Regulation
Find way to accurately measure oven temperature (IR and Dial does not work, underestimates)
Get standalone tempera...
Dan Shope

02/11/2010

11:55 PM Bug #1095 (Fixed): ColonyScout Mail Server
Dan Shope

02/10/2010

04:17 PM Task #1097 (Fixed): Email Steve about bootstrapping ARM
Steve doesn't know anything about it. He referred me to someone at iRobot but I never met him so that might not be a ... Kevin Woo
10:16 PM Task #1097: Email Steve about bootstrapping ARM
Emailed Steve, awaiting reply Kevin Woo
08:19 PM Task #1097 (Fixed): Email Steve about bootstrapping ARM
Rich Hong
04:16 PM Task #1102 (Fixed): Make JST 2,3,4 pin connector footprints
Added all 3 of them. Pushed to the latest copy of the library. Kevin Woo
03:22 PM Task #1102 (Fixed): Make JST 2,3,4 pin connector footprints
ZH type Kevin Woo
03:21 PM Task #1100 (Fixed): Spec 2, 3 and 4 pin JST ZH connectors
Added to the electrical BOM. Quantities still TBD. Need to make the footprints Kevin Woo
09:56 PM Task #1100 (Fixed): Spec 2, 3 and 4 pin JST ZH connectors
Straight up ones, smt and the housings Kevin Woo
09:59 PM Bug #1101 (Fixed): Add JST connectors to the bottom side for the front sensors
2 x 4 pin (5V, GND, encoder+, encoder-)
1 x 3 pin (5V, gnd, cliff sensor signal)
2 x 2 pin (gnd, button)
Kevin Woo
09:54 PM Bug #1099 (Fixed): Remove Extra FFC
* only 2 adc
* remove 1 edge detector
* more 4 motor encoder lines
* 2 external buttons
* Move down to a single...
Kevin Woo
09:50 PM Bug #1093: Stepper controller should be powered by VCC
4.7uF for bulk, .1uF otherwise Kevin Woo
09:16 PM Bug #1095: ColonyScout Mail Server
Using Google Apps, much easier to setup / administrator. Dan Shope will set it up and hand out email addresses. Rich Hong
07:10 PM Bug #1095 (Fixed): ColonyScout Mail Server
Need @colonyscout.com email address :) Dan Shope
08:20 PM Task #1098 (Wontfix): ask aaron and cornell about arm stuff
Brad Neuman
07:49 PM Bug #1096 (Fixed): Orb Reflectors
Design reflectors for orbs & hood Dan Shope

02/09/2010

06:52 PM Task #1085 (Fixed): Get the BreakFly Dimensions and positioning
See [[ECEBreakoutBoard]] for updated dimensions and positioning Dan Shope
06:49 PM Bug #1094 (Fixed): Encoder/Cliff Wiring
Only 2 encoders and 2 cliff sensors pairs should be routed through the FFC.
The remaining 2 encoder pairs and 1 cl...
Dan Shope
05:55 PM Bug #1093 (Fixed): Stepper controller should be powered by VCC
The VBB pins should be connected to VCC on the stepper controller. Also they should be have a decoupling capacitor on... Kevin Woo

02/07/2010

02:16 PM Bug #1088 (Invalid): Switch motor power from VCC to VBatt
We only want the motors to work if the battery is plugged in. Kevin Woo
09:17 PM Task #1087 (Fixed): Design Breakfly
FFC/cgrid <-> some form of small connector. Kevin Woo
09:16 PM Task #1086 (Invalid): Design debug board
* Dual usb (1 debug uart, 1 for avr)
* some form of tiny with a uart and an spi
Kevin Woo
09:15 PM Task #1046 (Fixed): Update BOM
Kevin Woo
09:06 PM Task #1085 (Fixed): Get the BreakFly Dimensions and positioning
Need the rectangular size of the board as well as how to line up the FFC connector. Kevin Woo
09:05 PM Task #970 (Fixed): Find all resistors we need
They're on the other BOM if needed Kevin Woo
09:04 PM Bug #1044 (Fixed): Choose a new rtc backup battery
We're going with the CR1220. Added to both BOMs Kevin Woo

02/06/2010

03:56 PM Task #1059 (Fixed): Content for Website
Dan Shope
02:34 AM Task #970: Find all resistors we need
Need to add these to the wiki BOM at some point. They are in the actual BOM. Lots of them are missing.
http://sear...
Kevin Woo
11:22 PM Task #1046: Update BOM
Wiki BOM has been updated. Moving with quantities and prices to the google doc: http://spreadsheets.google.com/ccc?ke... Kevin Woo
11:21 PM Bug #1032 (Fixed): Part Change
Kevin Woo
11:17 PM Bug #1032: Part Change
Sticking with the bga SDRAM Kevin Woo
11:16 PM Task #1037 (Fixed): Put 50MHz oscillator on the ethernet phy chip
Kevin Woo
11:11 PM Task #1045 (Fixed): Add a USB A port to the board on the host controller
Kevin Woo

01/29/2010

11:11 AM Task #1047 (Fixed): Team Member Bios
Dan Shope

01/28/2010

02:26 PM Task #1059 (Fixed): Content for Website
Need to provide content for the software/OS portion of www.colonyscout.com Dan Shope

01/27/2010

11:37 PM Bug #1032: Part Change
http://mouser.com/ProductDetail/Atmel/AT45DB161D-SU/?qs=sGAEpiMZZMuJXIph4YZFJU7D9eQuNJm0pgTssCTreYg%3d
16Mbit flas...
Kevin Woo
11:28 PM Task #1036 (Invalid): Doublecheck SDRAM footprint
Went back to the BGA part because there was an error in that footprint Kevin Woo

01/25/2010

12:21 AM Task #1047 (Fixed): Team Member Bios
Make a sample bio for team members to list on www.colonyscout.com
Should describe (in 3rd person) a brief bio of eac...
Dan Shope
 

Also available in: Atom