root / trunk / code / projects / mapping / odometry / odometry.c @ 979
History | View | Annotate | Download (3.81 KB)
1 |
#include "odometry.h" |
---|---|
2 |
#include <encoders.h> |
3 |
#include <move.h> |
4 |
#include <math.h> |
5 |
#include <avr/interrupt.h> |
6 |
#include <dragonfly_lib.h> |
7 |
|
8 |
void modify_velocity(void); |
9 |
|
10 |
|
11 |
long lround(double d); |
12 |
|
13 |
char control_velocity = 0; |
14 |
int encoder_ltm1, encoder_rtm1, move_speed, move_angle;
|
15 |
|
16 |
//Measure mm displacement in x and y from starting position. (+x:theta=0 +y:theta=M_PI/2)
|
17 |
long diff_x,diff_y, velocity, target_velocity, target_angular_velocity;
|
18 |
|
19 |
//Measures radian angle displacement from starting position. (initially 0)
|
20 |
double angle;
|
21 |
|
22 |
/**
|
23 |
* Retrieve the estimated x position. [mm]
|
24 |
*/
|
25 |
long odometry_dx(void){ |
26 |
return diff_x;
|
27 |
} |
28 |
|
29 |
/**
|
30 |
* Retrieve the estimated y position. [mm]
|
31 |
*/
|
32 |
long odometry_dy(void){ |
33 |
return diff_y;
|
34 |
} |
35 |
|
36 |
/**
|
37 |
* Retrieve the estimated angle [radians]
|
38 |
*/
|
39 |
double odometry_angle(void){ |
40 |
return angle;
|
41 |
} |
42 |
/**
|
43 |
* Retrieve the estimated velocity [mm / s]
|
44 |
*/
|
45 |
long odometry_velocity(void){ |
46 |
return velocity;
|
47 |
} |
48 |
|
49 |
void odometry_set_velocity(long t_velocity, double t_angular_velocity, int start_speed, int start_angle){ |
50 |
target_velocity = t_velocity; |
51 |
target_angular_velocity = t_angular_velocity; |
52 |
move_angle = start_angle; |
53 |
move_speed = start_speed; |
54 |
control_velocity = 1;
|
55 |
} |
56 |
|
57 |
/**
|
58 |
* Initializes odometry to run on timer 2.
|
59 |
* Also resets all values so that the center of the robot is
|
60 |
* considered to be at the origin facing the x direction.
|
61 |
*/
|
62 |
void odometry_init(void){ |
63 |
|
64 |
encoders_init(); |
65 |
|
66 |
delay_ms(100);
|
67 |
|
68 |
odometry_reset(); |
69 |
|
70 |
|
71 |
//CTC Mode. CLK / 1024
|
72 |
TCCR2 = 0; // (Fully disconnected) |
73 |
TCCR2 = _BV(WGM21) | _BV(CS22) | _BV(CS20); //CLK/1024 , CTC Mode.
|
74 |
|
75 |
TIMSK |= _BV(OCIE2); |
76 |
|
77 |
OCR2 = ODOMETRY_CLK; |
78 |
} |
79 |
/**
|
80 |
* Resets all values so that the center of the robot is
|
81 |
* considered to be at the origin facing the x direction.
|
82 |
*/
|
83 |
void odometry_reset(void){ |
84 |
diff_x = 0;
|
85 |
diff_y = 0;
|
86 |
encoder_ltm1 = encoder_read(LEFT); |
87 |
encoder_rtm1 = encoder_read(RIGHT); |
88 |
angle = 0.0; |
89 |
} |
90 |
|
91 |
|
92 |
void odometry_run(void){ |
93 |
//Angle swept through in a time step CCW-
|
94 |
double theta, rl, dc;
|
95 |
long dr,dl;
|
96 |
char buf[100]; |
97 |
|
98 |
//Get the change in wheel positions
|
99 |
{ |
100 |
int encoder_right = encoder_read(RIGHT);
|
101 |
int encoder_left = encoder_read(LEFT);
|
102 |
|
103 |
dl = encoder_left - encoder_ltm1; |
104 |
dr = encoder_right - encoder_rtm1; |
105 |
|
106 |
//No motion.
|
107 |
if(dl == 0 && dr == 0){ |
108 |
if(control_velocity) modify_velocity();
|
109 |
return;
|
110 |
} |
111 |
|
112 |
encoder_ltm1 = encoder_left; |
113 |
encoder_rtm1 = encoder_right; |
114 |
|
115 |
// Try to avoid over/underflow.
|
116 |
dl = dl > 512 ? dl - 1024 :dl; |
117 |
dl = dl < -512 ? dl + 1024 :dl; |
118 |
dr = dr > 512 ? dr - 1024 :dr; |
119 |
dr = dr < -512 ? dr + 1024 :dr; |
120 |
|
121 |
//Convert "clicks" to um
|
122 |
dl *= CLICK_DISTANCE_UM; //um
|
123 |
dr *= CLICK_DISTANCE_UM; |
124 |
} |
125 |
|
126 |
|
127 |
if(dl == dr){
|
128 |
diff_x += lround(dl*cos(angle)/1000.0); //mm |
129 |
diff_y += lround(dl*sin(angle)/1000.0); //mm |
130 |
velocity = lround((dl * 1000.0)/(ODOMETRY_CLK*TIME_SCALE)); //um / ms = mm/s |
131 |
if(control_velocity) modify_velocity();
|
132 |
return;
|
133 |
} |
134 |
|
135 |
//Call the left wheel 0, clockwise positive.
|
136 |
rl = ((double)(ROBOT_WIDTH_UM*dl))/((double)(dl - dr)); //um |
137 |
theta = ((double)(dl - dr))/((double)ROBOT_WIDTH_UM); //rad |
138 |
|
139 |
//Distance the center has traveled.
|
140 |
dc = (theta * (rl - ROBOT_WIDTH_UM)) / 2.0; //um |
141 |
velocity = lround( dc * 1000 /(ODOMETRY_CLK*TIME_SCALE));
|
142 |
|
143 |
//angle is necessarily CCW+, so subtract.
|
144 |
angle -= ANGLE_SCALE * theta; |
145 |
|
146 |
//Change state variables. Probably lose all measurements less then a mm.
|
147 |
diff_x += lround((DISTANCE_SCALE * dc * cos(angle))/1000.0); //mm |
148 |
diff_y += lround((DISTANCE_SCALE * dc * sin(angle))/1000.0); //mm |
149 |
|
150 |
if(control_velocity) modify_velocity();
|
151 |
} |
152 |
|
153 |
void modify_velocity(){
|
154 |
usb_puts("modify_velocity\n");
|
155 |
int diff = target_velocity - velocity;
|
156 |
if(diff > 0){ |
157 |
move_speed++; |
158 |
move(move_speed,move_angle); |
159 |
} |
160 |
else if(diff < 0){ |
161 |
move_speed--; |
162 |
move(move_speed,move_angle); |
163 |
} |
164 |
} |
165 |
|
166 |
ISR(TIMER2_COMP_vect){ |
167 |
//odometry_run();
|
168 |
} |
169 |
|
170 |
long lround(double d){ |
171 |
double f = floor(d);
|
172 |
return (long)(d - f > 0.5 ? f + 1 : f); |
173 |
} |
174 |
|
175 |
|