root / branches / encoders / code / projects / encoder_test / Makefile @ 880
History | View | Annotate | Download (13.7 KB)
1 |
########Update This Section######## |
---|---|
2 |
# |
3 |
# |
4 |
|
5 |
# Relative path to the root directory (containing lib directory) |
6 |
ifndef COLONYROOT |
7 |
COLONYROOT = ../../.. |
8 |
endif |
9 |
|
10 |
# Target file name (without extension). |
11 |
TARGET = template |
12 |
|
13 |
# Uncomment this to use the wireless library |
14 |
# USE_WIRELESS = 1 |
15 |
|
16 |
# com1 = serial port. Use lpt1 to connect to parallel port. |
17 |
AVRDUDE_PORT = /dev/ttyUSB0 |
18 |
# |
19 |
################################### |
20 |
|
21 |
# Hey Emacs, this is a -*- makefile -*- |
22 |
#---------------------------------------------------------------------------- |
23 |
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al. |
24 |
# |
25 |
# Released to the Public Domain |
26 |
# |
27 |
# Additional material for this makefile was written by: |
28 |
# Peter Fleury |
29 |
# Tim Henigan |
30 |
# Colin O'Flynn |
31 |
# Reiner Patommel |
32 |
# Markus Pfaff |
33 |
# Sander Pool |
34 |
# Frederik Rouleau |
35 |
# |
36 |
#---------------------------------------------------------------------------- |
37 |
# On command line: |
38 |
# |
39 |
# make all = Make software. |
40 |
# |
41 |
# make clean = Clean out built project files. |
42 |
# |
43 |
# make coff = Convert ELF to AVR COFF. |
44 |
# |
45 |
# make extcoff = Convert ELF to AVR Extended COFF. |
46 |
# |
47 |
# make program = Download the hex file to the device, using avrdude. |
48 |
# Please customize the avrdude settings below first! |
49 |
# |
50 |
# make debug = Start either simulavr or avarice as specified for debugging, |
51 |
# with avr-gdb or avr-insight as the front end for debugging. |
52 |
# |
53 |
# make filename.s = Just compile filename.c into the assembler code only. |
54 |
# |
55 |
# make filename.i = Create a preprocessed source file for use in submitting |
56 |
# bug reports to the GCC project. |
57 |
# |
58 |
# To rebuild project do "make clean" then "make all". |
59 |
#---------------------------------------------------------------------------- |
60 |
|
61 |
#if you want your code to work on the Firefly++ and not Firefly+ |
62 |
#then add the -DFFPP line to CDEFS |
63 |
CDEFS = |
64 |
#-DFFPP |
65 |
|
66 |
# MCU name |
67 |
MCU = atmega128 |
68 |
|
69 |
# Processor frequency. |
70 |
# This will define a symbol, F_CPU, in all source code files equal to the |
71 |
# processor frequency. You can then use this symbol in your source code to |
72 |
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
73 |
# automatically to create a 32-bit value in your source code. |
74 |
F_CPU = 8000000 |
75 |
|
76 |
# Output format. (can be srec, ihex, binary) |
77 |
FORMAT = ihex |
78 |
|
79 |
# List C source files here. (C dependencies are automatically generated.) |
80 |
SRC = $(wildcard *.c) |
81 |
|
82 |
# List Assembler source files here. |
83 |
# Make them always end in a capital .S. Files ending in a lowercase .s |
84 |
# will not be considered source files but generated files (assembler |
85 |
# output from the compiler), and will be deleted upon "make clean"! |
86 |
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
87 |
# it will preserve the spelling of the filenames, and gcc itself does |
88 |
# care about how the name is spelled on its command-line. |
89 |
ASRC = |
90 |
|
91 |
# Optimization level, can be [0, 1, 2, 3, s]. |
92 |
# 0 = turn off optimization. s = optimize for size. |
93 |
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
94 |
OPT = s |
95 |
|
96 |
# Debugging format. |
97 |
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
98 |
# AVR Studio 4.10 requires dwarf-2. |
99 |
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
100 |
DEBUG = |
101 |
|
102 |
# Compiler flag to set the C Standard level. |
103 |
# c89 = "ANSI" C |
104 |
# gnu89 = c89 plus GCC extensions |
105 |
# c99 = ISO C99 standard (not yet fully implemented) |
106 |
# gnu99 = c99 plus GCC extensions |
107 |
CSTANDARD = -std=gnu99 |
108 |
|
109 |
# Place -D or -U options here |
110 |
CDEFS += -DF_CPU=$(F_CPU)UL |
111 |
CDEFS += -DFFP |
112 |
# for wireless library |
113 |
ifdef USE_WIRELESS |
114 |
CDEFS += -DROBOT |
115 |
endif |
116 |
|
117 |
# Place -I, -L options here |
118 |
CINCS = -I$(COLONYROOT)/code/projects/libdragonfly |
119 |
CINCS += -L$(COLONYROOT)/code/lib/bin |
120 |
ifdef USE_WIRELESS |
121 |
CINCS += -I$(COLONYROOT)/code/lib/include/libwireless |
122 |
endif |
123 |
#---------------- Compiler Options ---------------- |
124 |
# -g*: generate debugging information |
125 |
# -O*: optimization level |
126 |
# -f...: tuning, see GCC manual and avr-libc documentation |
127 |
# -Wall...: warning level |
128 |
# -Wa,...: tell GCC to pass this to the assembler. |
129 |
# -adhlns...: create assembler listing |
130 |
CFLAGS = |
131 |
# CFLAGS = -g$(DEBUG) |
132 |
CFLAGS += $(CDEFS) $(CINCS) |
133 |
CFLAGS += -O$(OPT) |
134 |
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums |
135 |
CFLAGS += -Wall -Wstrict-prototypes |
136 |
CFLAGS += -Wa,-adhlns=$(<:.c=.lst) |
137 |
CFLAGS += $(CSTANDARD) |
138 |
|
139 |
#---------------- Assembler Options ---------------- |
140 |
# -Wa,...: tell GCC to pass this to the assembler. |
141 |
# -ahlms: create listing |
142 |
# -gstabs: have the assembler create line number information; note that |
143 |
# for use in COFF files, additional information about filenames |
144 |
# and function names needs to be present in the assembler source |
145 |
# files -- see avr-libc docs [FIXME: not yet described there] |
146 |
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
147 |
|
148 |
|
149 |
#---------------- Library Options ---------------- |
150 |
# Minimalistic printf version |
151 |
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
152 |
|
153 |
# Floating point printf version (requires MATH_LIB = -lm below) |
154 |
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
155 |
|
156 |
# If this is left blank, then it will use the Standard printf version. |
157 |
PRINTF_LIB = |
158 |
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
159 |
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
160 |
|
161 |
|
162 |
# Minimalistic scanf version |
163 |
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
164 |
|
165 |
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
166 |
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
167 |
|
168 |
# If this is left blank, then it will use the Standard scanf version. |
169 |
SCANF_LIB = |
170 |
#SCANF_LIB = $(SCANF_LIB_MIN) |
171 |
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
172 |
|
173 |
MATH_LIB = -lm |
174 |
|
175 |
#---------------- External Memory Options ---------------- |
176 |
|
177 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
178 |
# used for variables (.data/.bss) and heap (malloc()). |
179 |
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
180 |
|
181 |
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
182 |
# only used for heap (malloc()). |
183 |
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff |
184 |
|
185 |
EXTMEMOPTS = |
186 |
|
187 |
#---------------- Linker Options ---------------- |
188 |
# -Wl,...: tell GCC to pass this to linker. |
189 |
# -Map: create map file |
190 |
# --cref: add cross reference to map file |
191 |
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
192 |
LDFLAGS += $(EXTMEMOPTS) |
193 |
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
194 |
ifdef USE_WIRELESS |
195 |
LDFLAGS += -lwireless |
196 |
endif |
197 |
LDFLAGS += -ldragonfly |
198 |
|
199 |
|
200 |
#---------------- Programming Options (avrdude) ---------------- |
201 |
|
202 |
# Programming hardware: alf avr910 avrisp bascom bsd |
203 |
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
204 |
# |
205 |
# Type: avrdude -c ? |
206 |
# to get a full listing. |
207 |
# |
208 |
AVRDUDE_PROGRAMMER = avrisp |
209 |
|
210 |
# programmer connected to serial device |
211 |
|
212 |
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex |
213 |
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
214 |
|
215 |
|
216 |
# Uncomment the following if you want avrdude's erase cycle counter. |
217 |
# Note that this counter needs to be initialized first using -Yn, |
218 |
# see avrdude manual. |
219 |
#AVRDUDE_ERASE_COUNTER = -y |
220 |
|
221 |
# Uncomment the following if you do /not/ wish a verification to be |
222 |
# performed after programming the device. |
223 |
#AVRDUDE_NO_VERIFY = -V |
224 |
|
225 |
# Increase verbosity level. Please use this when submitting bug |
226 |
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
227 |
# to submit bug reports. |
228 |
#AVRDUDE_VERBOSE = -v -v |
229 |
|
230 |
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
231 |
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
232 |
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
233 |
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
234 |
|
235 |
#don't check for device signature |
236 |
AVRDUDE_FLAGS += -F |
237 |
|
238 |
|
239 |
|
240 |
#---------------- Debugging Options ---------------- |
241 |
|
242 |
# For simulavr only - target MCU frequency. |
243 |
DEBUG_MFREQ = $(F_CPU) |
244 |
|
245 |
# Set the DEBUG_UI to either gdb or insight. |
246 |
# DEBUG_UI = gdb |
247 |
DEBUG_UI = insight |
248 |
|
249 |
# Set the debugging back-end to either avarice, simulavr. |
250 |
DEBUG_BACKEND = avarice |
251 |
#DEBUG_BACKEND = simulavr |
252 |
|
253 |
# GDB Init Filename. |
254 |
GDBINIT_FILE = __avr_gdbinit |
255 |
|
256 |
# When using avarice settings for the JTAG |
257 |
JTAG_DEV = /dev/com1 |
258 |
|
259 |
# Debugging port used to communicate between GDB / avarice / simulavr. |
260 |
DEBUG_PORT = 4242 |
261 |
|
262 |
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
263 |
# just set to localhost unless doing some sort of crazy debugging when |
264 |
# avarice is running on a different computer. |
265 |
DEBUG_HOST = localhost |
266 |
|
267 |
|
268 |
|
269 |
#============================================================================ |
270 |
|
271 |
|
272 |
# Define programs and commands. |
273 |
SHELL = sh |
274 |
CC = avr-gcc |
275 |
OBJCOPY = avr-objcopy |
276 |
OBJDUMP = avr-objdump |
277 |
SIZE = avr-size |
278 |
NM = avr-nm |
279 |
AVRDUDE = avrdude |
280 |
REMOVE = rm -f |
281 |
REMOVEDIR = rm -rf |
282 |
COPY = cp |
283 |
WINSHELL = cmd |
284 |
|
285 |
|
286 |
# Define Messages |
287 |
# English |
288 |
MSG_ERRORS_NONE = Errors: none |
289 |
MSG_BEGIN = -------- begin -------- |
290 |
MSG_END = -------- end -------- |
291 |
MSG_SIZE_BEFORE = Size before: |
292 |
MSG_SIZE_AFTER = Size after: |
293 |
MSG_COFF = Converting to AVR COFF: |
294 |
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
295 |
MSG_FLASH = Creating load file for Flash: |
296 |
MSG_EEPROM = Creating load file for EEPROM: |
297 |
MSG_EXTENDED_LISTING = Creating Extended Listing: |
298 |
MSG_SYMBOL_TABLE = Creating Symbol Table: |
299 |
MSG_LINKING = Linking: |
300 |
MSG_COMPILING = Compiling: |
301 |
MSG_ASSEMBLING = Assembling: |
302 |
MSG_CLEANING = Cleaning project: |
303 |
|
304 |
|
305 |
|
306 |
|
307 |
# Define all object files. |
308 |
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
309 |
|
310 |
# Define all listing files. |
311 |
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) |
312 |
|
313 |
|
314 |
# Compiler flags to generate dependency files. |
315 |
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d |
316 |
|
317 |
|
318 |
# Combine all necessary flags and optional flags. |
319 |
# Add target processor to flags. |
320 |
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
321 |
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
322 |
|
323 |
|
324 |
|
325 |
|
326 |
|
327 |
# Default target. |
328 |
all: begin gccversion sizebefore build sizeafter end |
329 |
|
330 |
build: elf hex eep lss sym |
331 |
|
332 |
elf: $(TARGET).elf |
333 |
hex: $(TARGET).hex |
334 |
eep: $(TARGET).eep |
335 |
lss: $(TARGET).lss |
336 |
sym: $(TARGET).sym |
337 |
|
338 |
|
339 |
|
340 |
# Eye candy. |
341 |
# AVR Studio 3.x does not check make's exit code but relies on |
342 |
# the following magic strings to be generated by the compile job. |
343 |
begin: |
344 |
@echo |
345 |
@echo $(MSG_BEGIN) |
346 |
|
347 |
end: |
348 |
@echo $(MSG_END) |
349 |
@echo |
350 |
|
351 |
|
352 |
# Display size of file. |
353 |
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
354 |
ELFSIZE = $(SIZE) -A $(TARGET).elf |
355 |
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU) |
356 |
|
357 |
sizebefore: |
358 |
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
359 |
$(AVRMEM) 2>/dev/null; echo; fi |
360 |
|
361 |
sizeafter: |
362 |
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
363 |
$(AVRMEM) 2>/dev/null; echo; fi |
364 |
|
365 |
|
366 |
|
367 |
# Display compiler version information. |
368 |
gccversion : |
369 |
@$(CC) --version |
370 |
|
371 |
|
372 |
|
373 |
# Program the device. |
374 |
program: $(TARGET).hex $(TARGET).eep |
375 |
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
376 |
|
377 |
|
378 |
# Generate avr-gdb config/init file which does the following: |
379 |
# define the reset signal, load the target file, connect to target, and set |
380 |
# a breakpoint at main(). |
381 |
gdb-config: |
382 |
@$(REMOVE) $(GDBINIT_FILE) |
383 |
@echo define reset >> $(GDBINIT_FILE) |
384 |
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
385 |
@echo end >> $(GDBINIT_FILE) |
386 |
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
387 |
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
388 |
ifeq ($(DEBUG_BACKEND),simulavr) |
389 |
@echo load >> $(GDBINIT_FILE) |
390 |
endif |
391 |
@echo break main >> $(GDBINIT_FILE) |
392 |
|
393 |
debug: gdb-config $(TARGET).elf |
394 |
ifeq ($(DEBUG_BACKEND), avarice) |
395 |
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
396 |
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
397 |
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
398 |
@$(WINSHELL) /c pause |
399 |
|
400 |
else |
401 |
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
402 |
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
403 |
endif |
404 |
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
405 |
|
406 |
|
407 |
|
408 |
|
409 |
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
410 |
COFFCONVERT=$(OBJCOPY) --debugging \ |
411 |
--change-section-address .data-0x800000 \ |
412 |
--change-section-address .bss-0x800000 \ |
413 |
--change-section-address .noinit-0x800000 \ |
414 |
--change-section-address .eeprom-0x810000 |
415 |
|
416 |
|
417 |
coff: $(TARGET).elf |
418 |
@echo |
419 |
@echo $(MSG_COFF) $(TARGET).cof |
420 |
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
421 |
|
422 |
|
423 |
extcoff: $(TARGET).elf |
424 |
@echo |
425 |
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
426 |
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
427 |
|
428 |
|
429 |
|
430 |
# Create final output files (.hex, .eep) from ELF output file. |
431 |
%.hex: %.elf |
432 |
@echo |
433 |
@echo $(MSG_FLASH) $@ |
434 |
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
435 |
|
436 |
%.eep: %.elf |
437 |
@echo |
438 |
@echo $(MSG_EEPROM) $@ |
439 |
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
440 |
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
441 |
|
442 |
# Create extended listing file from ELF output file. |
443 |
%.lss: %.elf |
444 |
@echo |
445 |
@echo $(MSG_EXTENDED_LISTING) $@ |
446 |
$(OBJDUMP) -h -S $< > $@ |
447 |
|
448 |
# Create a symbol table from ELF output file. |
449 |
%.sym: %.elf |
450 |
@echo |
451 |
@echo $(MSG_SYMBOL_TABLE) $@ |
452 |
$(NM) -n $< > $@ |
453 |
|
454 |
|
455 |
|
456 |
# Link: create ELF output file from object files. |
457 |
.SECONDARY : $(TARGET).elf |
458 |
.PRECIOUS : $(OBJ) |
459 |
%.elf: $(OBJ) |
460 |
@echo |
461 |
@echo $(MSG_LINKING) $@ |
462 |
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
463 |
|
464 |
|
465 |
# Compile: create object files from C source files. |
466 |
%.o : %.c |
467 |
@echo |
468 |
@echo $(MSG_COMPILING) $< |
469 |
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
470 |
|
471 |
|
472 |
# Compile: create assembler files from C source files. |
473 |
%.s : %.c |
474 |
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
475 |
|
476 |
|
477 |
# Assemble: create object files from assembler source files. |
478 |
%.o : %.S |
479 |
@echo |
480 |
@echo $(MSG_ASSEMBLING) $< |
481 |
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
482 |
|
483 |
# Create preprocessed source for use in sending a bug report. |
484 |
%.i : %.c |
485 |
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
486 |
|
487 |
|
488 |
# Target: clean project. |
489 |
clean: begin clean_list end |
490 |
|
491 |
clean_list : |
492 |
@echo |
493 |
@echo $(MSG_CLEANING) |
494 |
$(REMOVE) $(TARGET).hex |
495 |
$(REMOVE) $(TARGET).eep |
496 |
$(REMOVE) $(TARGET).cof |
497 |
$(REMOVE) $(TARGET).elf |
498 |
$(REMOVE) $(TARGET).map |
499 |
$(REMOVE) $(TARGET).sym |
500 |
$(REMOVE) $(TARGET).lss |
501 |
$(REMOVE) $(OBJ) |
502 |
$(REMOVE) $(LST) |
503 |
$(REMOVE) $(SRC:.c=.s) |
504 |
$(REMOVE) $(SRC:.c=.d) |
505 |
$(REMOVEDIR) .dep |
506 |
|
507 |
|
508 |
|
509 |
# Include the dependency files. |
510 |
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
511 |
|
512 |
|
513 |
# Listing of phony targets. |
514 |
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
515 |
build elf hex eep lss sym coff extcoff \ |
516 |
clean clean_list program debug gdb-config |
517 |
|