Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / colonet / robot / robot_slave / Makefile @ 566

History | View | Annotate | Download (14.3 KB)

1
########Update This Section########
2
#
3
#
4

    
5
# Relative path to the root directory (containing lib directory)
6
#ifndef COLONYROOT
7
COLONYROOT = ../../../../..
8
#endif
9

    
10
# Target file name (without extension).
11
TARGET = robot_slave
12

    
13
# Uncomment this to use the wireless library
14
USE_WIRELESS = 1
15

    
16
# com1 = serial port. Use lpt1 to connect to parallel port.
17
AVRDUDE_PORT = /dev/ttyUSB1
18
#AVRDUDE_PORT = /dev/ttyUSB0
19
#AVRDUDE_PORT = /dev/ttyUSB2
20

    
21
#
22
#
23
###################################
24

    
25
# Hey Emacs, this is a -*- makefile -*-
26
#----------------------------------------------------------------------------
27
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
28
#
29
# Released to the Public Domain
30
#
31
# Additional material for this makefile was written by:
32
# Peter Fleury
33
# Tim Henigan
34
# Colin O'Flynn
35
# Reiner Patommel
36
# Markus Pfaff
37
# Sander Pool
38
# Frederik Rouleau
39
#
40
#----------------------------------------------------------------------------
41
# On command line:
42
#
43
# make all = Make software.
44
#
45
# make clean = Clean out built project files.
46
#
47
# make coff = Convert ELF to AVR COFF.
48
#
49
# make extcoff = Convert ELF to AVR Extended COFF.
50
#
51
# make program = Download the hex file to the device, using avrdude.
52
#                Please customize the avrdude settings below first!
53
#
54
# make debug = Start either simulavr or avarice as specified for debugging,
55
#              with avr-gdb or avr-insight as the front end for debugging.
56
#
57
# make filename.s = Just compile filename.c into the assembler code only.
58
#
59
# make filename.i = Create a preprocessed source file for use in submitting
60
#                   bug reports to the GCC project.
61
#
62
# To rebuild project do "make clean" then "make all".
63
#----------------------------------------------------------------------------
64

    
65
#if you want your code to work on the Firefly++ and not Firefly+
66
#then add the -DFFPP line to CDEFS
67
CDEFS =
68
#-DFFPP
69

    
70
# MCU name
71
MCU = atmega128
72

    
73
# Processor frequency.
74
#     This will define a symbol, F_CPU, in all source code files equal to the
75
#     processor frequency. You can then use this symbol in your source code to
76
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
77
#     automatically to create a 32-bit value in your source code.
78
F_CPU = 8000000
79

    
80
# Output format. (can be srec, ihex, binary)
81
FORMAT = ihex
82

    
83
# List C source files here. (C dependencies are automatically generated.)
84
SRC = $(wildcard *.c)
85

    
86
# List Assembler source files here.
87
#     Make them always end in a capital .S.  Files ending in a lowercase .s
88
#     will not be considered source files but generated files (assembler
89
#     output from the compiler), and will be deleted upon "make clean"!
90
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
91
#     it will preserve the spelling of the filenames, and gcc itself does
92
#     care about how the name is spelled on its command-line.
93
ASRC =
94

    
95
# Optimization level, can be [0, 1, 2, 3, s].
96
#     0 = turn off optimization. s = optimize for size.
97
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
98
OPT = s
99

    
100
# Debugging format.
101
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
102
#     AVR Studio 4.10 requires dwarf-2.
103
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
104
DEBUG =
105

    
106
# Compiler flag to set the C Standard level.
107
#     c89   = "ANSI" C
108
#     gnu89 = c89 plus GCC extensions
109
#     c99   = ISO C99 standard (not yet fully implemented)
110
#     gnu99 = c99 plus GCC extensions
111
CSTANDARD = -std=gnu99
112

    
113
# Place -D or -U options here
114
CDEFS += -DF_CPU=$(F_CPU)UL
115
CDEFS += -DFFP
116
# for wireless library
117
ifdef USE_WIRELESS
118
	CDEFS += -DROBOT
119
endif
120

    
121
# Place -I, -L options here
122
CINCS = -I$(COLONYROOT)/code/lib/include/libdragonfly
123
CINCS += -L$(COLONYROOT)/code/lib/bin
124
ifdef USE_WIRELESS
125
	CINCS += -I$(COLONYROOT)/code/projects/libwireless/lib -I$(COLONYROOT)/code/projects/colonet/common -I$(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly
126
endif
127

    
128
#---------------- Compiler Options ----------------
129
#  -g*:          generate debugging information
130
#  -O*:          optimization level
131
#  -f...:        tuning, see GCC manual and avr-libc documentation
132
#  -Wall...:     warning level
133
#  -Wa,...:      tell GCC to pass this to the assembler.
134
#    -adhlns...: create assembler listing
135
CFLAGS =
136
# CFLAGS = -g$(DEBUG)
137
CFLAGS += $(CDEFS) $(CINCS)
138
CFLAGS += -O$(OPT)
139
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
140
CFLAGS += -Wall -Wstrict-prototypes
141
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
142
CFLAGS += $(CSTANDARD)
143

    
144
#---------------- Assembler Options ----------------
145
#  -Wa,...:   tell GCC to pass this to the assembler.
146
#  -ahlms:    create listing
147
#  -gstabs:   have the assembler create line number information; note that
148
#             for use in COFF files, additional information about filenames
149
#             and function names needs to be present in the assembler source
150
#             files -- see avr-libc docs [FIXME: not yet described there]
151
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
152

    
153

    
154
#---------------- Library Options ----------------
155
# Minimalistic printf version
156
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
157

    
158
# Floating point printf version (requires MATH_LIB = -lm below)
159
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
160

    
161
# If this is left blank, then it will use the Standard printf version.
162
PRINTF_LIB =
163
#PRINTF_LIB = $(PRINTF_LIB_MIN)
164
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
165

    
166

    
167
# Minimalistic scanf version
168
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
169

    
170
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
171
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
172

    
173
# If this is left blank, then it will use the Standard scanf version.
174
SCANF_LIB =
175
#SCANF_LIB = $(SCANF_LIB_MIN)
176
#SCANF_LIB = $(SCANF_LIB_FLOAT)
177

    
178
MATH_LIB = -lm
179

    
180
#---------------- External Memory Options ----------------
181

    
182
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
183
# used for variables (.data/.bss) and heap (malloc()).
184
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
185

    
186
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
187
# only used for heap (malloc()).
188
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
189

    
190
EXTMEMOPTS =
191

    
192
#---------------- Linker Options ----------------
193
#  -Wl,...:     tell GCC to pass this to linker.
194
#    -Map:      create map file
195
#    --cref:    add cross reference to  map file
196
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
197
LDFLAGS += $(EXTMEMOPTS)
198
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
199
ifdef USE_WIRELESS
200
	LDFLAGS += -lwireless -lcolonet_dragonfly
201
endif
202
LDFLAGS += -ldragonfly
203

    
204

    
205

    
206
#---------------- Programming Options (avrdude) ----------------
207

    
208
# Programming hardware: alf avr910 avrisp bascom bsd
209
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
210
#
211
# Type: avrdude -c ?
212
# to get a full listing.
213
#
214
AVRDUDE_PROGRAMMER = avrisp
215

    
216
# programmer connected to serial device
217

    
218
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
219
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
220

    
221

    
222
# Uncomment the following if you want avrdude's erase cycle counter.
223
# Note that this counter needs to be initialized first using -Yn,
224
# see avrdude manual.
225
#AVRDUDE_ERASE_COUNTER = -y
226

    
227
# Uncomment the following if you do /not/ wish a verification to be
228
# performed after programming the device.
229
#AVRDUDE_NO_VERIFY = -V
230

    
231
# Increase verbosity level.  Please use this when submitting bug
232
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
233
# to submit bug reports.
234
#AVRDUDE_VERBOSE = -v -v
235

    
236
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
237
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
238
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
239
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
240

    
241
#don't check for device signature
242
AVRDUDE_FLAGS += -F
243

    
244
#---------------- Debugging Options ----------------
245

    
246
# For simulavr only - target MCU frequency.
247
DEBUG_MFREQ = $(F_CPU)
248

    
249
# Set the DEBUG_UI to either gdb or insight.
250
# DEBUG_UI = gdb
251
DEBUG_UI = insight
252

    
253
# Set the debugging back-end to either avarice, simulavr.
254
DEBUG_BACKEND = avarice
255
#DEBUG_BACKEND = simulavr
256

    
257
# GDB Init Filename.
258
GDBINIT_FILE = __avr_gdbinit
259

    
260
# When using avarice settings for the JTAG
261
JTAG_DEV = /dev/com1
262

    
263
# Debugging port used to communicate between GDB / avarice / simulavr.
264
DEBUG_PORT = 4242
265

    
266
# Debugging host used to communicate between GDB / avarice / simulavr, normally
267
#     just set to localhost unless doing some sort of crazy debugging when
268
#     avarice is running on a different computer.
269
DEBUG_HOST = localhost
270

    
271

    
272

    
273
#============================================================================
274

    
275

    
276
# Define programs and commands.
277
SHELL = sh
278
CC = avr-gcc
279
OBJCOPY = avr-objcopy
280
OBJDUMP = avr-objdump
281
SIZE = avr-size
282
NM = avr-nm
283
AVRDUDE = avrdude
284
REMOVE = rm -f
285
REMOVEDIR = rm -rf
286
COPY = cp
287
WINSHELL = cmd
288

    
289

    
290
# Define Messages
291
# English
292
MSG_ERRORS_NONE = Errors: none
293
MSG_BEGIN = -------- begin --------
294
MSG_END = --------  end  --------
295
MSG_SIZE_BEFORE = Size before:
296
MSG_SIZE_AFTER = Size after:
297
MSG_COFF = Converting to AVR COFF:
298
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
299
MSG_FLASH = Creating load file for Flash:
300
MSG_EEPROM = Creating load file for EEPROM:
301
MSG_EXTENDED_LISTING = Creating Extended Listing:
302
MSG_SYMBOL_TABLE = Creating Symbol Table:
303
MSG_LINKING = Linking:
304
MSG_COMPILING = Compiling:
305
MSG_ASSEMBLING = Assembling:
306
MSG_CLEANING = Cleaning project:
307

    
308

    
309

    
310

    
311
# Define all object files.
312
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
313

    
314
# Define all listing files.
315
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
316

    
317

    
318
# Compiler flags to generate dependency files.
319
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
320

    
321

    
322
# Combine all necessary flags and optional flags.
323
# Add target processor to flags.
324
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
325
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
326

    
327
# Default target.
328
all: begin gccversion sizebefore build sizeafter end
329

    
330
$(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly/libcolonet_dragonfly.a: $(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly/colonet_dragonfly.c $(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly/colonet_dragonfly.h
331
	cd $(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly; make
332

    
333
build: $(COLONYROOT)/code/projects/colonet/robot/colonet_dragonfly/libcolonet_dragonfly.a elf hex eep lss sym
334

    
335
elf: $(TARGET).elf
336
hex: $(TARGET).hex
337
eep: $(TARGET).eep
338
lss: $(TARGET).lss
339
sym: $(TARGET).sym
340

    
341

    
342

    
343
# Eye candy.
344
# AVR Studio 3.x does not check make's exit code but relies on
345
# the following magic strings to be generated by the compile job.
346
begin:
347
	@echo
348
	@echo $(MSG_BEGIN)
349

    
350
end:
351
	@echo $(MSG_END)
352
	@echo
353

    
354

    
355
# Display size of file.
356
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
357
ELFSIZE = $(SIZE) -A $(TARGET).elf
358
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
359

    
360
sizebefore:
361
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
362
	$(AVRMEM) 2>/dev/null; echo; fi
363

    
364
sizeafter:
365
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
366
	$(AVRMEM) 2>/dev/null; echo; fi
367

    
368

    
369

    
370
# Display compiler version information.
371
gccversion :
372
	@$(CC) --version
373

    
374

    
375

    
376
# Program the device.
377
program: $(TARGET).hex $(TARGET).eep
378
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
379

    
380

    
381
# Generate avr-gdb config/init file which does the following:
382
#     define the reset signal, load the target file, connect to target, and set
383
#     a breakpoint at main().
384
gdb-config:
385
	@$(REMOVE) $(GDBINIT_FILE)
386
	@echo define reset >> $(GDBINIT_FILE)
387
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
388
	@echo end >> $(GDBINIT_FILE)
389
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
390
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
391
ifeq ($(DEBUG_BACKEND),simulavr)
392
	@echo load  >> $(GDBINIT_FILE)
393
endif
394
	@echo break main >> $(GDBINIT_FILE)
395

    
396
debug: gdb-config $(TARGET).elf
397
ifeq ($(DEBUG_BACKEND), avarice)
398
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
399
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
400
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
401
	@$(WINSHELL) /c pause
402

    
403
else
404
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
405
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
406
endif
407
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
408

    
409

    
410
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
411
COFFCONVERT=$(OBJCOPY) --debugging \
412
--change-section-address .data-0x800000 \
413
--change-section-address .bss-0x800000 \
414
--change-section-address .noinit-0x800000 \
415
--change-section-address .eeprom-0x810000
416

    
417
coff: $(TARGET).elf
418
	@echo
419
	@echo $(MSG_COFF) $(TARGET).cof
420
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
421

    
422

    
423
extcoff: $(TARGET).elf
424
	@echo
425
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
426
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
427

    
428

    
429

    
430
# Create final output files (.hex, .eep) from ELF output file.
431
%.hex: %.elf
432
	@echo
433
	@echo $(MSG_FLASH) $@
434
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
435

    
436
%.eep: %.elf
437
	@echo
438
	@echo $(MSG_EEPROM) $@
439
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
440
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
441

    
442
# Create extended listing file from ELF output file.
443
%.lss: %.elf
444
	@echo
445
	@echo $(MSG_EXTENDED_LISTING) $@
446
	$(OBJDUMP) -h -S $< > $@
447

    
448
# Create a symbol table from ELF output file.
449
%.sym: %.elf
450
	@echo
451
	@echo $(MSG_SYMBOL_TABLE) $@
452
	$(NM) -n $< > $@
453

    
454
# Link: create ELF output file from object files.
455
.SECONDARY : $(TARGET).elf
456
.PRECIOUS : $(OBJ)
457
%.elf: $(OBJ)
458
	@echo
459
	@echo $(MSG_LINKING) $@
460
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
461

    
462
# Compile: create object files from C source files.
463
%.o : %.c
464
	@echo
465
	@echo $(MSG_COMPILING) $<
466
	$(CC) -c $(ALL_CFLAGS) $< -o $@
467

    
468
# Compile: create assembler files from C source files.
469
%.s : %.c
470
	$(CC) -S $(ALL_CFLAGS) $< -o $@
471

    
472
# Assemble: create object files from assembler source files.
473
%.o : %.S
474
	@echo
475
	@echo $(MSG_ASSEMBLING) $<
476
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
477

    
478
# Create preprocessed source for use in sending a bug report.
479
%.i : %.c
480
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
481

    
482
# Target: clean project.
483
clean: begin clean_list end
484

    
485
clean_list :
486
	@echo
487
	@echo $(MSG_CLEANING)
488
	$(REMOVE) $(TARGET).hex
489
	$(REMOVE) $(TARGET).eep
490
	$(REMOVE) $(TARGET).cof
491
	$(REMOVE) $(TARGET).elf
492
	$(REMOVE) $(TARGET).map
493
	$(REMOVE) $(TARGET).sym
494
	$(REMOVE) $(TARGET).lss
495
	$(REMOVE) $(OBJ)
496
	$(REMOVE) $(LST)
497
	$(REMOVE) $(SRC:.c=.s)
498
	$(REMOVE) $(SRC:.c=.d)
499
	$(REMOVEDIR) .dep
500

    
501
# Include the dependency files.
502
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
503

    
504
# Listing of phony targets.
505
.PHONY : all begin finish end sizebefore sizeafter gccversion \
506
build elf hex eep lss sym coff extcoff \
507
clean clean_list program debug gdb-config