Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / colonet / utilities / robot_slave / Makefile @ 419

History | View | Annotate | Download (14.1 KB)

1
########Update This Section########
2
#
3
#
4

    
5
# Relative path to the root directory (containing lib directory)
6
#ifndef COLONYROOT
7
COLONYROOT = ../../../../../
8
#endif
9

    
10
# Target file name (without extension).
11
TARGET = robot_slave
12

    
13
# Uncomment this to use the wireless library
14
USE_WIRELESS = 1
15

    
16
# com1 = serial port. Use lpt1 to connect to parallel port.
17
#AVRDUDE_PORT = /dev/ttyUSB1
18
AVRDUDE_PORT = /dev/ttyUSB0
19

    
20
#
21
#
22
###################################
23

    
24
# Hey Emacs, this is a -*- makefile -*-
25
#----------------------------------------------------------------------------
26
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
27
#
28
# Released to the Public Domain
29
#
30
# Additional material for this makefile was written by:
31
# Peter Fleury
32
# Tim Henigan
33
# Colin O'Flynn
34
# Reiner Patommel
35
# Markus Pfaff
36
# Sander Pool
37
# Frederik Rouleau
38
#
39
#----------------------------------------------------------------------------
40
# On command line:
41
#
42
# make all = Make software.
43
#
44
# make clean = Clean out built project files.
45
#
46
# make coff = Convert ELF to AVR COFF.
47
#
48
# make extcoff = Convert ELF to AVR Extended COFF.
49
#
50
# make program = Download the hex file to the device, using avrdude.
51
#                Please customize the avrdude settings below first!
52
#
53
# make debug = Start either simulavr or avarice as specified for debugging,
54
#              with avr-gdb or avr-insight as the front end for debugging.
55
#
56
# make filename.s = Just compile filename.c into the assembler code only.
57
#
58
# make filename.i = Create a preprocessed source file for use in submitting
59
#                   bug reports to the GCC project.
60
#
61
# To rebuild project do "make clean" then "make all".
62
#----------------------------------------------------------------------------
63

    
64
#if you want your code to work on the Firefly++ and not Firefly+
65
#then add the -DFFPP line to CDEFS
66
CDEFS =
67
#-DFFPP
68

    
69
# MCU name
70
MCU = atmega128
71

    
72
# Processor frequency.
73
#     This will define a symbol, F_CPU, in all source code files equal to the
74
#     processor frequency. You can then use this symbol in your source code to
75
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
76
#     automatically to create a 32-bit value in your source code.
77
F_CPU = 8000000
78

    
79
# Output format. (can be srec, ihex, binary)
80
FORMAT = ihex
81

    
82
# List C source files here. (C dependencies are automatically generated.)
83
SRC = $(wildcard *.c)
84

    
85
# List Assembler source files here.
86
#     Make them always end in a capital .S.  Files ending in a lowercase .s
87
#     will not be considered source files but generated files (assembler
88
#     output from the compiler), and will be deleted upon "make clean"!
89
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
90
#     it will preserve the spelling of the filenames, and gcc itself does
91
#     care about how the name is spelled on its command-line.
92
ASRC =
93

    
94
# Optimization level, can be [0, 1, 2, 3, s].
95
#     0 = turn off optimization. s = optimize for size.
96
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
97
OPT = s
98

    
99
# Debugging format.
100
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
101
#     AVR Studio 4.10 requires dwarf-2.
102
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
103
DEBUG =
104

    
105
# Compiler flag to set the C Standard level.
106
#     c89   = "ANSI" C
107
#     gnu89 = c89 plus GCC extensions
108
#     c99   = ISO C99 standard (not yet fully implemented)
109
#     gnu99 = c99 plus GCC extensions
110
CSTANDARD = -std=gnu99
111

    
112
# Place -D or -U options here
113
CDEFS += -DF_CPU=$(F_CPU)UL
114
CDEFS += -DFFP
115
# for wireless library
116
ifdef USE_WIRELESS
117
	CDEFS += -DROBOT
118
endif
119

    
120
# Place -I, -L options here
121
CINCS = -I$(COLONYROOT)/code/lib/include/libdragonfly
122
CINCS += -L$(COLONYROOT)/code/lib/bin
123
ifdef USE_WIRELESS
124
	CINCS += -I$(COLONYROOT)/code/lib/include/libwireless -I$(COLONYROOT)/code/projects/colonet/lib -I$(COLONYROOT)/code/projects/colonet/lib/colonet_dragonfly
125
endif
126

    
127
#---------------- Compiler Options ----------------
128
#  -g*:          generate debugging information
129
#  -O*:          optimization level
130
#  -f...:        tuning, see GCC manual and avr-libc documentation
131
#  -Wall...:     warning level
132
#  -Wa,...:      tell GCC to pass this to the assembler.
133
#    -adhlns...: create assembler listing
134
CFLAGS =
135
# CFLAGS = -g$(DEBUG)
136
CFLAGS += $(CDEFS) $(CINCS)
137
CFLAGS += -O$(OPT)
138
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
139
CFLAGS += -Wall -Wstrict-prototypes
140
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
141
CFLAGS += $(CSTANDARD)
142

    
143
#---------------- Assembler Options ----------------
144
#  -Wa,...:   tell GCC to pass this to the assembler.
145
#  -ahlms:    create listing
146
#  -gstabs:   have the assembler create line number information; note that
147
#             for use in COFF files, additional information about filenames
148
#             and function names needs to be present in the assembler source
149
#             files -- see avr-libc docs [FIXME: not yet described there]
150
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
151

    
152

    
153
#---------------- Library Options ----------------
154
# Minimalistic printf version
155
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
156

    
157
# Floating point printf version (requires MATH_LIB = -lm below)
158
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
159

    
160
# If this is left blank, then it will use the Standard printf version.
161
PRINTF_LIB =
162
#PRINTF_LIB = $(PRINTF_LIB_MIN)
163
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
164

    
165

    
166
# Minimalistic scanf version
167
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
168

    
169
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
170
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
171

    
172
# If this is left blank, then it will use the Standard scanf version.
173
SCANF_LIB =
174
#SCANF_LIB = $(SCANF_LIB_MIN)
175
#SCANF_LIB = $(SCANF_LIB_FLOAT)
176

    
177
MATH_LIB = -lm
178

    
179
#---------------- External Memory Options ----------------
180

    
181
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
182
# used for variables (.data/.bss) and heap (malloc()).
183
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
184

    
185
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
186
# only used for heap (malloc()).
187
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
188

    
189
EXTMEMOPTS =
190

    
191
#---------------- Linker Options ----------------
192
#  -Wl,...:     tell GCC to pass this to linker.
193
#    -Map:      create map file
194
#    --cref:    add cross reference to  map file
195
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
196
LDFLAGS += $(EXTMEMOPTS)
197
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
198
ifdef USE_WIRELESS
199
	LDFLAGS += -lwireless -lcolonet_dragonfly
200
endif
201
LDFLAGS += -ldragonfly
202

    
203

    
204

    
205
#---------------- Programming Options (avrdude) ----------------
206

    
207
# Programming hardware: alf avr910 avrisp bascom bsd
208
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
209
#
210
# Type: avrdude -c ?
211
# to get a full listing.
212
#
213
AVRDUDE_PROGRAMMER = avrisp
214

    
215
# programmer connected to serial device
216

    
217
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
218
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
219

    
220

    
221
# Uncomment the following if you want avrdude's erase cycle counter.
222
# Note that this counter needs to be initialized first using -Yn,
223
# see avrdude manual.
224
#AVRDUDE_ERASE_COUNTER = -y
225

    
226
# Uncomment the following if you do /not/ wish a verification to be
227
# performed after programming the device.
228
#AVRDUDE_NO_VERIFY = -V
229

    
230
# Increase verbosity level.  Please use this when submitting bug
231
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
232
# to submit bug reports.
233
#AVRDUDE_VERBOSE = -v -v
234

    
235
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
236
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
237
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
238
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
239

    
240
#don't check for device signature
241
AVRDUDE_FLAGS += -F
242

    
243
#---------------- Debugging Options ----------------
244

    
245
# For simulavr only - target MCU frequency.
246
DEBUG_MFREQ = $(F_CPU)
247

    
248
# Set the DEBUG_UI to either gdb or insight.
249
# DEBUG_UI = gdb
250
DEBUG_UI = insight
251

    
252
# Set the debugging back-end to either avarice, simulavr.
253
DEBUG_BACKEND = avarice
254
#DEBUG_BACKEND = simulavr
255

    
256
# GDB Init Filename.
257
GDBINIT_FILE = __avr_gdbinit
258

    
259
# When using avarice settings for the JTAG
260
JTAG_DEV = /dev/com1
261

    
262
# Debugging port used to communicate between GDB / avarice / simulavr.
263
DEBUG_PORT = 4242
264

    
265
# Debugging host used to communicate between GDB / avarice / simulavr, normally
266
#     just set to localhost unless doing some sort of crazy debugging when
267
#     avarice is running on a different computer.
268
DEBUG_HOST = localhost
269

    
270

    
271

    
272
#============================================================================
273

    
274

    
275
# Define programs and commands.
276
SHELL = sh
277
CC = avr-gcc
278
OBJCOPY = avr-objcopy
279
OBJDUMP = avr-objdump
280
SIZE = avr-size
281
NM = avr-nm
282
AVRDUDE = avrdude
283
REMOVE = rm -f
284
REMOVEDIR = rm -rf
285
COPY = cp
286
WINSHELL = cmd
287

    
288

    
289
# Define Messages
290
# English
291
MSG_ERRORS_NONE = Errors: none
292
MSG_BEGIN = -------- begin --------
293
MSG_END = --------  end  --------
294
MSG_SIZE_BEFORE = Size before:
295
MSG_SIZE_AFTER = Size after:
296
MSG_COFF = Converting to AVR COFF:
297
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
298
MSG_FLASH = Creating load file for Flash:
299
MSG_EEPROM = Creating load file for EEPROM:
300
MSG_EXTENDED_LISTING = Creating Extended Listing:
301
MSG_SYMBOL_TABLE = Creating Symbol Table:
302
MSG_LINKING = Linking:
303
MSG_COMPILING = Compiling:
304
MSG_ASSEMBLING = Assembling:
305
MSG_CLEANING = Cleaning project:
306

    
307

    
308

    
309

    
310
# Define all object files.
311
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
312

    
313
# Define all listing files.
314
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
315

    
316

    
317
# Compiler flags to generate dependency files.
318
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
319

    
320

    
321
# Combine all necessary flags and optional flags.
322
# Add target processor to flags.
323
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
324
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
325

    
326
# Default target.
327
all: begin gccversion sizebefore build sizeafter end
328

    
329
../../lib/colonet_dragonfly/libcolonet_dragonfly.a: ../../lib/colonet_dragonfly/colonet_dragonfly.c ../../lib/colonet_dragonfly/colonet_dragonfly.h
330
	cd ../../lib/colonet_dragonfly; make
331

    
332
build: ../../lib/colonet_dragonfly/libcolonet_dragonfly.a elf hex eep lss sym
333

    
334
elf: $(TARGET).elf
335
hex: $(TARGET).hex
336
eep: $(TARGET).eep
337
lss: $(TARGET).lss
338
sym: $(TARGET).sym
339

    
340

    
341

    
342
# Eye candy.
343
# AVR Studio 3.x does not check make's exit code but relies on
344
# the following magic strings to be generated by the compile job.
345
begin:
346
	@echo
347
	@echo $(MSG_BEGIN)
348

    
349
end:
350
	@echo $(MSG_END)
351
	@echo
352

    
353

    
354
# Display size of file.
355
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
356
ELFSIZE = $(SIZE) -A $(TARGET).elf
357
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
358

    
359
sizebefore:
360
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
361
	$(AVRMEM) 2>/dev/null; echo; fi
362

    
363
sizeafter:
364
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
365
	$(AVRMEM) 2>/dev/null; echo; fi
366

    
367

    
368

    
369
# Display compiler version information.
370
gccversion :
371
	@$(CC) --version
372

    
373

    
374

    
375
# Program the device.
376
program: $(TARGET).hex $(TARGET).eep
377
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
378

    
379

    
380
# Generate avr-gdb config/init file which does the following:
381
#     define the reset signal, load the target file, connect to target, and set
382
#     a breakpoint at main().
383
gdb-config:
384
	@$(REMOVE) $(GDBINIT_FILE)
385
	@echo define reset >> $(GDBINIT_FILE)
386
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
387
	@echo end >> $(GDBINIT_FILE)
388
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
389
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
390
ifeq ($(DEBUG_BACKEND),simulavr)
391
	@echo load  >> $(GDBINIT_FILE)
392
endif
393
	@echo break main >> $(GDBINIT_FILE)
394

    
395
debug: gdb-config $(TARGET).elf
396
ifeq ($(DEBUG_BACKEND), avarice)
397
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
398
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
399
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
400
	@$(WINSHELL) /c pause
401

    
402
else
403
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
404
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
405
endif
406
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
407

    
408

    
409
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
410
COFFCONVERT=$(OBJCOPY) --debugging \
411
--change-section-address .data-0x800000 \
412
--change-section-address .bss-0x800000 \
413
--change-section-address .noinit-0x800000 \
414
--change-section-address .eeprom-0x810000
415

    
416
coff: $(TARGET).elf
417
	@echo
418
	@echo $(MSG_COFF) $(TARGET).cof
419
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
420

    
421

    
422
extcoff: $(TARGET).elf
423
	@echo
424
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
425
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
426

    
427

    
428

    
429
# Create final output files (.hex, .eep) from ELF output file.
430
%.hex: %.elf
431
	@echo
432
	@echo $(MSG_FLASH) $@
433
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
434

    
435
%.eep: %.elf
436
	@echo
437
	@echo $(MSG_EEPROM) $@
438
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
439
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
440

    
441
# Create extended listing file from ELF output file.
442
%.lss: %.elf
443
	@echo
444
	@echo $(MSG_EXTENDED_LISTING) $@
445
	$(OBJDUMP) -h -S $< > $@
446

    
447
# Create a symbol table from ELF output file.
448
%.sym: %.elf
449
	@echo
450
	@echo $(MSG_SYMBOL_TABLE) $@
451
	$(NM) -n $< > $@
452

    
453
# Link: create ELF output file from object files.
454
.SECONDARY : $(TARGET).elf
455
.PRECIOUS : $(OBJ)
456
%.elf: $(OBJ)
457
	@echo
458
	@echo $(MSG_LINKING) $@
459
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
460

    
461
# Compile: create object files from C source files.
462
%.o : %.c
463
	@echo
464
	@echo $(MSG_COMPILING) $<
465
	$(CC) -c $(ALL_CFLAGS) $< -o $@
466

    
467
# Compile: create assembler files from C source files.
468
%.s : %.c
469
	$(CC) -S $(ALL_CFLAGS) $< -o $@
470

    
471
# Assemble: create object files from assembler source files.
472
%.o : %.S
473
	@echo
474
	@echo $(MSG_ASSEMBLING) $<
475
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
476

    
477
# Create preprocessed source for use in sending a bug report.
478
%.i : %.c
479
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
480

    
481
# Target: clean project.
482
clean: begin clean_list end
483

    
484
clean_list :
485
	@echo
486
	@echo $(MSG_CLEANING)
487
	$(REMOVE) $(TARGET).hex
488
	$(REMOVE) $(TARGET).eep
489
	$(REMOVE) $(TARGET).cof
490
	$(REMOVE) $(TARGET).elf
491
	$(REMOVE) $(TARGET).map
492
	$(REMOVE) $(TARGET).sym
493
	$(REMOVE) $(TARGET).lss
494
	$(REMOVE) $(OBJ)
495
	$(REMOVE) $(LST)
496
	$(REMOVE) $(SRC:.c=.s)
497
	$(REMOVE) $(SRC:.c=.d)
498
	$(REMOVEDIR) .dep
499

    
500
# Include the dependency files.
501
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
502

    
503
# Listing of phony targets.
504
.PHONY : all begin finish end sizebefore sizeafter gccversion \
505
build elf hex eep lss sym coff extcoff \
506
clean clean_list program debug gdb-config