Project

General

Profile

Statistics
| Revision:

root / branches / library_refactor / behaviors / orbit_fsm / Makefile @ 1390

History | View | Annotate | Download (14 KB)

1
########Update This Section########
2
#
3
#
4

    
5
# Relative path to the root directory (containing lib directory)
6
ifndef COLONYROOT
7
COLONYROOT = ../../..
8
endif
9

    
10
# Target file name (without extension).
11
TARGET = template
12

    
13
# Uncomment this to use the wireless library
14
USE_WIRELESS = 1
15

    
16
# com1 = serial port. Use lpt1 to connect to parallel port.
17
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
18
#/dev/tty.usbserial*
19
#
20
#
21
###################################
22

    
23
# Hey Emacs, this is a -*- makefile -*-
24
#----------------------------------------------------------------------------
25
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
26
#
27
# Released to the Public Domain
28
#
29
# Additional material for this makefile was written by:
30
# Peter Fleury
31
# Tim Henigan
32
# Colin O'Flynn
33
# Reiner Patommel
34
# Markus Pfaff
35
# Sander Pool
36
# Frederik Rouleau
37
#
38
#----------------------------------------------------------------------------
39
# On command line:
40
#
41
# make all = Make software.
42
#
43
# make clean = Clean out built project files.
44
#
45
# make coff = Convert ELF to AVR COFF.
46
#
47
# make extcoff = Convert ELF to AVR Extended COFF.
48
#
49
# make program = Download the hex file to the device, using avrdude.
50
#                Please customize the avrdude settings below first!
51
#
52
# make debug = Start either simulavr or avarice as specified for debugging, 
53
#              with avr-gdb or avr-insight as the front end for debugging.
54
#
55
# make filename.s = Just compile filename.c into the assembler code only.
56
#
57
# make filename.i = Create a preprocessed source file for use in submitting
58
#                   bug reports to the GCC project.
59
#
60
# To rebuild project do "make clean" then "make all".
61
#----------------------------------------------------------------------------
62

    
63
#if you want your code to work on the Firefly++ and not Firefly+
64
#then add the -DFFPP line to CDEFS
65
CDEFS = 
66
#-DFFPP
67

    
68
# MCU name
69
MCU = atmega128
70

    
71
# Processor frequency.
72
#     This will define a symbol, F_CPU, in all source code files equal to the 
73
#     processor frequency. You can then use this symbol in your source code to 
74
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
75
#     automatically to create a 32-bit value in your source code.
76
F_CPU = 8000000
77

    
78
# Output format. (can be srec, ihex, binary)
79
FORMAT = ihex
80

    
81
# List C source files here. (C dependencies are automatically generated.)
82
SRC = $(wildcard *.c)
83

    
84
# List Assembler source files here.
85
#     Make them always end in a capital .S.  Files ending in a lowercase .s
86
#     will not be considered source files but generated files (assembler
87
#     output from the compiler), and will be deleted upon "make clean"!
88
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
89
#     it will preserve the spelling of the filenames, and gcc itself does
90
#     care about how the name is spelled on its command-line.
91
ASRC = 
92

    
93
# Optimization level, can be [0, 1, 2, 3, s]. 
94
#     0 = turn off optimization. s = optimize for size.
95
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
96
OPT = s
97

    
98
# Debugging format.
99
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
100
#     AVR Studio 4.10 requires dwarf-2.
101
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
102
DEBUG = 
103

    
104
# Compiler flag to set the C Standard level.
105
#     c89   = "ANSI" C
106
#     gnu89 = c89 plus GCC extensions
107
#     c99   = ISO C99 standard (not yet fully implemented)
108
#     gnu99 = c99 plus GCC extensions
109
CSTANDARD = -std=gnu99
110

    
111
# Place -D or -U options here
112
CDEFS += -DF_CPU=$(F_CPU)UL 
113
CDEFS += -DFFP
114
# for wireless library
115
ifdef USE_WIRELESS
116
	CDEFS += -DROBOT
117
endif
118

    
119
# Place -I, -L options here
120
CINCS = -I$(COLONYROOT)/code/lib/include/libdragonfly 
121
CINCS += -L$(COLONYROOT)/code/lib/bin
122
ifdef USE_WIRELESS
123
	CINCS += -I$(COLONYROOT)/code/lib/include/libwireless #-I$(COLONYROOT)/code/projects/colonet/lib -I$(COLONYROOT)/code/projects/colonet/lib/colonet_dragonfly
124
endif
125

    
126
#---------------- Compiler Options ----------------
127
#  -g*:          generate debugging information
128
#  -O*:          optimization level
129
#  -f...:        tuning, see GCC manual and avr-libc documentation
130
#  -Wall...:     warning level
131
#  -Wa,...:      tell GCC to pass this to the assembler.
132
#    -adhlns...: create assembler listing
133
CFLAGS =
134
# CFLAGS = -g$(DEBUG)
135
CFLAGS += $(CDEFS) $(CINCS)
136
CFLAGS += -O$(OPT)
137
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
138
CFLAGS += -Wall -Wstrict-prototypes
139
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
140
CFLAGS += $(CSTANDARD)
141

    
142
#---------------- Assembler Options ----------------
143
#  -Wa,...:   tell GCC to pass this to the assembler.
144
#  -ahlms:    create listing
145
#  -gstabs:   have the assembler create line number information; note that
146
#             for use in COFF files, additional information about filenames
147
#             and function names needs to be present in the assembler source
148
#             files -- see avr-libc docs [FIXME: not yet described there]
149
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
150

    
151

    
152
#---------------- Library Options ----------------
153
# Minimalistic printf version
154
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
155

    
156
# Floating point printf version (requires MATH_LIB = -lm below)
157
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
158

    
159
# If this is left blank, then it will use the Standard printf version.
160
PRINTF_LIB = 
161
#PRINTF_LIB = $(PRINTF_LIB_MIN)
162
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
163

    
164

    
165
# Minimalistic scanf version
166
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
167

    
168
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
169
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
170

    
171
# If this is left blank, then it will use the Standard scanf version.
172
SCANF_LIB = 
173
#SCANF_LIB = $(SCANF_LIB_MIN)
174
#SCANF_LIB = $(SCANF_LIB_FLOAT)
175

    
176
MATH_LIB = -lm
177

    
178
#---------------- External Memory Options ----------------
179

    
180
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
181
# used for variables (.data/.bss) and heap (malloc()).
182
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
183

    
184
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
185
# only used for heap (malloc()).
186
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
187

    
188
EXTMEMOPTS =
189

    
190
#---------------- Linker Options ----------------
191
#  -Wl,...:     tell GCC to pass this to linker.
192
#    -Map:      create map file
193
#    --cref:    add cross reference to  map file
194
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
195
LDFLAGS += $(EXTMEMOPTS)
196
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
197
ifdef USE_WIRELESS
198
	LDFLAGS += -lwireless #-lcolonet_dragonfly
199
endif
200
LDFLAGS += -ldragonfly
201

    
202

    
203

    
204
#---------------- Programming Options (avrdude) ----------------
205

    
206
# Programming hardware: alf avr910 avrisp bascom bsd 
207
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
208
#
209
# Type: avrdude -c ?
210
# to get a full listing.
211
#
212
AVRDUDE_PROGRAMMER = avrisp
213

    
214
# programmer connected to serial device
215

    
216
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
217
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
218

    
219

    
220
# Uncomment the following if you want avrdude's erase cycle counter.
221
# Note that this counter needs to be initialized first using -Yn,
222
# see avrdude manual.
223
#AVRDUDE_ERASE_COUNTER = -y
224

    
225
# Uncomment the following if you do /not/ wish a verification to be
226
# performed after programming the device.
227
#AVRDUDE_NO_VERIFY = -V
228

    
229
# Increase verbosity level.  Please use this when submitting bug
230
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
231
# to submit bug reports.
232
#AVRDUDE_VERBOSE = -v -v
233

    
234
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
235
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
236
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
237
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
238

    
239
#don't check for device signature
240
AVRDUDE_FLAGS += -F
241

    
242

    
243

    
244
#---------------- Debugging Options ----------------
245

    
246
# For simulavr only - target MCU frequency.
247
DEBUG_MFREQ = $(F_CPU)
248

    
249
# Set the DEBUG_UI to either gdb or insight.
250
# DEBUG_UI = gdb
251
DEBUG_UI = insight
252

    
253
# Set the debugging back-end to either avarice, simulavr.
254
DEBUG_BACKEND = avarice
255
#DEBUG_BACKEND = simulavr
256

    
257
# GDB Init Filename.
258
GDBINIT_FILE = __avr_gdbinit
259

    
260
# When using avarice settings for the JTAG
261
JTAG_DEV = /dev/com1
262

    
263
# Debugging port used to communicate between GDB / avarice / simulavr.
264
DEBUG_PORT = 4242
265

    
266
# Debugging host used to communicate between GDB / avarice / simulavr, normally
267
#     just set to localhost unless doing some sort of crazy debugging when 
268
#     avarice is running on a different computer.
269
DEBUG_HOST = localhost
270

    
271

    
272

    
273
#============================================================================
274

    
275

    
276
# Define programs and commands.
277
SHELL = sh
278
CC = avr-gcc
279
OBJCOPY = avr-objcopy
280
OBJDUMP = avr-objdump
281
SIZE = avr-size
282
NM = avr-nm
283
AVRDUDE = avrdude
284
REMOVE = rm -f
285
REMOVEDIR = rm -rf
286
COPY = cp
287
WINSHELL = cmd
288

    
289

    
290
# Define Messages
291
# English
292
MSG_ERRORS_NONE = Errors: none
293
MSG_BEGIN = -------- begin --------
294
MSG_END = --------  end  --------
295
MSG_SIZE_BEFORE = Size before: 
296
MSG_SIZE_AFTER = Size after:
297
MSG_COFF = Converting to AVR COFF:
298
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
299
MSG_FLASH = Creating load file for Flash:
300
MSG_EEPROM = Creating load file for EEPROM:
301
MSG_EXTENDED_LISTING = Creating Extended Listing:
302
MSG_SYMBOL_TABLE = Creating Symbol Table:
303
MSG_LINKING = Linking:
304
MSG_COMPILING = Compiling:
305
MSG_ASSEMBLING = Assembling:
306
MSG_CLEANING = Cleaning project:
307

    
308

    
309

    
310

    
311
# Define all object files.
312
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
313

    
314
# Define all listing files.
315
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) 
316

    
317

    
318
# Compiler flags to generate dependency files.
319
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
320

    
321

    
322
# Combine all necessary flags and optional flags.
323
# Add target processor to flags.
324
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
325
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
326

    
327

    
328

    
329

    
330

    
331
# Default target.
332
all: begin gccversion sizebefore build sizeafter end
333

    
334
build: elf hex eep lss sym
335

    
336
elf: $(TARGET).elf
337
hex: $(TARGET).hex
338
eep: $(TARGET).eep
339
lss: $(TARGET).lss 
340
sym: $(TARGET).sym
341

    
342

    
343

    
344
# Eye candy.
345
# AVR Studio 3.x does not check make's exit code but relies on
346
# the following magic strings to be generated by the compile job.
347
begin:
348
	@echo
349
	@echo $(MSG_BEGIN)
350

    
351
end:
352
	@echo $(MSG_END)
353
	@echo
354

    
355

    
356
# Display size of file.
357
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
358
ELFSIZE = $(SIZE) -A $(TARGET).elf
359
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
360

    
361
sizebefore:
362
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
363
	$(AVRMEM) 2>/dev/null; echo; fi
364

    
365
sizeafter:
366
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
367
	$(AVRMEM) 2>/dev/null; echo; fi
368

    
369

    
370

    
371
# Display compiler version information.
372
gccversion : 
373
	@$(CC) --version
374

    
375

    
376

    
377
# Program the device.  
378
program: $(TARGET).hex $(TARGET).eep
379
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
380

    
381

    
382
# Generate avr-gdb config/init file which does the following:
383
#     define the reset signal, load the target file, connect to target, and set 
384
#     a breakpoint at main().
385
gdb-config: 
386
	@$(REMOVE) $(GDBINIT_FILE)
387
	@echo define reset >> $(GDBINIT_FILE)
388
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
389
	@echo end >> $(GDBINIT_FILE)
390
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
391
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
392
ifeq ($(DEBUG_BACKEND),simulavr)
393
	@echo load  >> $(GDBINIT_FILE)
394
endif	
395
	@echo break main >> $(GDBINIT_FILE)
396
	
397
debug: gdb-config $(TARGET).elf
398
ifeq ($(DEBUG_BACKEND), avarice)
399
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
400
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
401
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
402
	@$(WINSHELL) /c pause
403
	
404
else
405
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
406
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
407
endif
408
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
409
	
410

    
411

    
412

    
413
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
414
COFFCONVERT=$(OBJCOPY) --debugging \
415
--change-section-address .data-0x800000 \
416
--change-section-address .bss-0x800000 \
417
--change-section-address .noinit-0x800000 \
418
--change-section-address .eeprom-0x810000 
419

    
420

    
421
coff: $(TARGET).elf
422
	@echo
423
	@echo $(MSG_COFF) $(TARGET).cof
424
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
425

    
426

    
427
extcoff: $(TARGET).elf
428
	@echo
429
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
430
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
431

    
432

    
433

    
434
# Create final output files (.hex, .eep) from ELF output file.
435
%.hex: %.elf
436
	@echo
437
	@echo $(MSG_FLASH) $@
438
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
439

    
440
%.eep: %.elf
441
	@echo
442
	@echo $(MSG_EEPROM) $@
443
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
444
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
445

    
446
# Create extended listing file from ELF output file.
447
%.lss: %.elf
448
	@echo
449
	@echo $(MSG_EXTENDED_LISTING) $@
450
	$(OBJDUMP) -h -S $< > $@
451

    
452
# Create a symbol table from ELF output file.
453
%.sym: %.elf
454
	@echo
455
	@echo $(MSG_SYMBOL_TABLE) $@
456
	$(NM) -n $< > $@
457

    
458

    
459

    
460
# Link: create ELF output file from object files.
461
.SECONDARY : $(TARGET).elf
462
.PRECIOUS : $(OBJ)
463
%.elf: $(OBJ)
464
	@echo
465
	@echo $(MSG_LINKING) $@
466
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
467

    
468

    
469
# Compile: create object files from C source files.
470
%.o : %.c
471
	@echo
472
	@echo $(MSG_COMPILING) $<
473
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
474

    
475

    
476
# Compile: create assembler files from C source files.
477
%.s : %.c
478
	$(CC) -S $(ALL_CFLAGS) $< -o $@
479

    
480

    
481
# Assemble: create object files from assembler source files.
482
%.o : %.S
483
	@echo
484
	@echo $(MSG_ASSEMBLING) $<
485
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
486

    
487
# Create preprocessed source for use in sending a bug report.
488
%.i : %.c
489
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
490

    
491

    
492
# Target: clean project.
493
clean: begin clean_list end
494

    
495
clean_list :
496
	@echo
497
	@echo $(MSG_CLEANING)
498
	$(REMOVE) $(TARGET).hex
499
	$(REMOVE) $(TARGET).eep
500
	$(REMOVE) $(TARGET).cof
501
	$(REMOVE) $(TARGET).elf
502
	$(REMOVE) $(TARGET).map
503
	$(REMOVE) $(TARGET).sym
504
	$(REMOVE) $(TARGET).lss
505
	$(REMOVE) $(OBJ)
506
	$(REMOVE) $(LST)
507
	$(REMOVE) $(SRC:.c=.s)
508
	$(REMOVE) $(SRC:.c=.d)
509
	$(REMOVEDIR) .dep
510

    
511

    
512

    
513
# Include the dependency files.
514
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
515

    
516

    
517
# Listing of phony targets.
518
.PHONY : all begin finish end sizebefore sizeafter gccversion \
519
build elf hex eep lss sym coff extcoff \
520
clean clean_list program debug gdb-config
521