Project

General

Profile

Statistics
| Revision:

root / branches / autonomous_recharging / code / projects / colonet / testing / wl_network_colonet / Makefile @ 1390

History | View | Annotate | Download (13.9 KB)

1
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik Rouleau
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging, 
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40

    
41

    
42
# MCU name
43
MCU = atmega128
44

    
45

    
46
# Processor frequency.
47
#     This will define a symbol, F_CPU, in all source code files equal to the 
48
#     processor frequency. You can then use this symbol in your source code to 
49
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
50
#     automatically to create a 32-bit value in your source code.
51
F_CPU = 16000000
52

    
53

    
54
# Output format. (can be srec, ihex, binary)
55
FORMAT = ihex
56

    
57

    
58
# Target file name (without extension).
59
TARGET = wl_test
60

    
61

    
62
# List C source files here. (C dependencies are automatically generated.)
63
SRC = $(wildcard *.c)
64
#$(TARGET).c 
65

    
66

    
67
# List Assembler source files here.
68
#     Make them always end in a capital .S.  Files ending in a lowercase .s
69
#     will not be considered source files but generated files (assembler
70
#     output from the compiler), and will be deleted upon "make clean"!
71
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
72
#     it will preserve the spelling of the filenames, and gcc itself does
73
#     care about how the name is spelled on its command-line.
74
ASRC = 
75

    
76

    
77
# Optimization level, can be [0, 1, 2, 3, s]. 
78
#     0 = turn off optimization. s = optimize for size.
79
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
80
OPT = s
81

    
82

    
83
# Debugging format.
84
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
85
#     AVR Studio 4.10 requires dwarf-2.
86
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
87
DEBUG = dwarf-2
88

    
89

    
90
# List any extra directories to look for include files here.
91
#     Each directory must be seperated by a space.
92
#     Use forward slashes for directory separators.
93
#     For a directory that has spaces, enclose it in quotes.
94
EXTRAINCDIRS = C:\WinAVR\include\fwr
95

    
96

    
97
# Compiler flag to set the C Standard level.
98
#     c89   = "ANSI" C
99
#     gnu89 = c89 plus GCC extensions
100
#     c99   = ISO C99 standard (not yet fully implemented)
101
#     gnu99 = c99 plus GCC extensions
102
CSTANDARD = -std=gnu99
103

    
104

    
105
# Place -D or -U options here
106
CDEFS = -DF_CPU=$(F_CPU)UL
107

    
108

    
109
# Place -I options here
110
CINCS =
111

    
112

    
113

    
114
#---------------- Compiler Options ----------------
115
#  -g*:          generate debugging information
116
#  -O*:          optimization level
117
#  -f...:        tuning, see GCC manual and avr-libc documentation
118
#  -Wall...:     warning level
119
#  -Wa,...:      tell GCC to pass this to the assembler.
120
#    -adhlns...: create assembler listing
121
CFLAGS = -g$(DEBUG)
122
CFLAGS += $(CDEFS) $(CINCS)
123
CFLAGS += -O$(OPT)
124
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
125
CFLAGS += -Wall -Wstrict-prototypes
126
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
127
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
128
CFLAGS += $(CSTANDARD)
129

    
130

    
131
#---------------- Assembler Options ----------------
132
#  -Wa,...:   tell GCC to pass this to the assembler.
133
#  -ahlms:    create listing
134
#  -gstabs:   have the assembler create line number information; note that
135
#             for use in COFF files, additional information about filenames
136
#             and function names needs to be present in the assembler source
137
#             files -- see avr-libc docs [FIXME: not yet described there]
138
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
139

    
140

    
141
#---------------- Library Options ----------------
142
# Minimalistic printf version
143
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
144

    
145
# Floating point printf version (requires MATH_LIB = -lm below)
146
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
147

    
148
# If this is left blank, then it will use the Standard printf version.
149
PRINTF_LIB = 
150
#PRINTF_LIB = $(PRINTF_LIB_MIN)
151
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
152

    
153

    
154
# Minimalistic scanf version
155
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
156

    
157
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
158
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
159

    
160
# If this is left blank, then it will use the Standard scanf version.
161
SCANF_LIB = 
162
#SCANF_LIB = $(SCANF_LIB_MIN)
163
#SCANF_LIB = $(SCANF_LIB_FLOAT)
164

    
165

    
166
MATH_LIB = -lm
167

    
168

    
169

    
170
#---------------- External Memory Options ----------------
171

    
172
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
173
# used for variables (.data/.bss) and heap (malloc()).
174
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
175

    
176
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
177
# only used for heap (malloc()).
178
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
179

    
180
EXTMEMOPTS =
181

    
182

    
183

    
184
#---------------- Linker Options ----------------
185
#  -Wl,...:     tell GCC to pass this to linker.
186
#    -Map:      create map file
187
#    --cref:    add cross reference to  map file
188
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
189
LDFLAGS += $(EXTMEMOPTS)
190
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
191

    
192

    
193

    
194
#---------------- Programming Options (avrdude) ----------------
195

    
196
# Programming hardware: alf avr910 avrisp bascom bsd 
197
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
198
#
199
# Type: avrdude -c ?
200
# to get a full listing.
201
#
202
AVRDUDE_PROGRAMMER = avrisp
203

    
204
# com1 = serial port. Use lpt1 to connect to parallel port.
205
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
206
# programmer connected to serial device
207

    
208
AVRDUDE_WRITE_FLASH = -b 9600 -U flash:w:$(TARGET).hex
209
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
210

    
211

    
212
# Uncomment the following if you want avrdude's erase cycle counter.
213
# Note that this counter needs to be initialized first using -Yn,
214
# see avrdude manual.
215
#AVRDUDE_ERASE_COUNTER = -y
216

    
217
# Uncomment the following if you do /not/ wish a verification to be
218
# performed after programming the device.
219
AVRDUDE_NO_VERIFY = -V
220

    
221
# Increase verbosity level.  Please use this when submitting bug
222
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
223
# to submit bug reports.
224
#AVRDUDE_VERBOSE = -v -v
225

    
226
AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
227
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
228
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
229
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
230

    
231

    
232

    
233
#---------------- Debugging Options ----------------
234

    
235
# For simulavr only - target MCU frequency.
236
DEBUG_MFREQ = $(F_CPU)
237

    
238
# Set the DEBUG_UI to either gdb or insight.
239
# DEBUG_UI = gdb
240
DEBUG_UI = insight
241

    
242
# Set the debugging back-end to either avarice, simulavr.
243
DEBUG_BACKEND = avarice
244
#DEBUG_BACKEND = simulavr
245

    
246
# GDB Init Filename.
247
GDBINIT_FILE = __avr_gdbinit
248

    
249
# When using avarice settings for the JTAG
250
JTAG_DEV = /dev/com1
251

    
252
# Debugging port used to communicate between GDB / avarice / simulavr.
253
DEBUG_PORT = 4242
254

    
255
# Debugging host used to communicate between GDB / avarice / simulavr, normally
256
#     just set to localhost unless doing some sort of crazy debugging when 
257
#     avarice is running on a different computer.
258
DEBUG_HOST = localhost
259

    
260

    
261

    
262
#============================================================================
263

    
264

    
265
# Define programs and commands.
266
SHELL = sh
267
CC = avr-gcc
268
OBJCOPY = avr-objcopy
269
OBJDUMP = avr-objdump
270
SIZE = avr-size
271
NM = avr-nm
272
AVRDUDE = avrdude
273
REMOVE = rm -f
274
COPY = cp
275
WINSHELL = cmd
276

    
277

    
278
# Define Messages
279
# English
280
MSG_ERRORS_NONE = Errors: none
281
MSG_BEGIN = -------- begin --------
282
MSG_END = --------  end  --------
283
MSG_SIZE_BEFORE = Size before: 
284
MSG_SIZE_AFTER = Size after:
285
MSG_COFF = Converting to AVR COFF:
286
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
287
MSG_FLASH = Creating load file for Flash:
288
MSG_EEPROM = Creating load file for EEPROM:
289
MSG_EXTENDED_LISTING = Creating Extended Listing:
290
MSG_SYMBOL_TABLE = Creating Symbol Table:
291
MSG_LINKING = Linking:
292
MSG_COMPILING = Compiling:
293
MSG_ASSEMBLING = Assembling:
294
MSG_CLEANING = Cleaning project:
295

    
296

    
297

    
298

    
299
# Define all object files.
300
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
301

    
302
# Define all listing files.
303
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) 
304

    
305

    
306
# Compiler flags to generate dependency files.
307
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
308

    
309

    
310
# Combine all necessary flags and optional flags.
311
# Add target processor to flags.
312
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
313
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
314

    
315

    
316

    
317

    
318

    
319
# Default target.
320
all: begin gccversion sizebefore build sizeafter end
321

    
322
build: elf hex eep lss sym
323

    
324
elf: $(TARGET).elf
325
hex: $(TARGET).hex
326
eep: $(TARGET).eep
327
lss: $(TARGET).lss 
328
sym: $(TARGET).sym
329

    
330

    
331

    
332
# Eye candy.
333
# AVR Studio 3.x does not check make's exit code but relies on
334
# the following magic strings to be generated by the compile job.
335
begin:
336
	@echo
337
	@echo $(MSG_BEGIN)
338

    
339
end:
340
	@echo $(MSG_END)
341
	@echo
342

    
343

    
344
# Display size of file.
345
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
346
ELFSIZE = $(SIZE) -A $(TARGET).elf
347
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
348

    
349
sizebefore:
350
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
351
	$(AVRMEM) 2>/dev/null; echo; fi
352

    
353
sizeafter:
354
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
355
	$(AVRMEM) 2>/dev/null; echo; fi
356

    
357

    
358

    
359
# Display compiler version information.
360
gccversion : 
361
	@$(CC) --version
362

    
363

    
364

    
365
# Program the device.  
366
program: $(TARGET).hex $(TARGET).eep
367
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
368

    
369

    
370
# Generate avr-gdb config/init file which does the following:
371
#     define the reset signal, load the target file, connect to target, and set 
372
#     a breakpoint at main().
373
gdb-config: 
374
	@$(REMOVE) $(GDBINIT_FILE)
375
	@echo define reset >> $(GDBINIT_FILE)
376
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
377
	@echo end >> $(GDBINIT_FILE)
378
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
379
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
380
ifeq ($(DEBUG_BACKEND),simulavr)
381
	@echo load  >> $(GDBINIT_FILE)
382
endif	
383
	@echo break main >> $(GDBINIT_FILE)
384
	
385
debug: gdb-config $(TARGET).elf
386
ifeq ($(DEBUG_BACKEND), avarice)
387
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
388
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
389
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
390
	@$(WINSHELL) /c pause
391
	
392
else
393
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
394
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
395
endif
396
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
397
	
398

    
399

    
400

    
401
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
402
COFFCONVERT=$(OBJCOPY) --debugging \
403
--change-section-address .data-0x800000 \
404
--change-section-address .bss-0x800000 \
405
--change-section-address .noinit-0x800000 \
406
--change-section-address .eeprom-0x810000 
407

    
408

    
409
coff: $(TARGET).elf
410
	@echo
411
	@echo $(MSG_COFF) $(TARGET).cof
412
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
413

    
414

    
415
extcoff: $(TARGET).elf
416
	@echo
417
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
418
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
419

    
420

    
421

    
422
# Create final output files (.hex, .eep) from ELF output file.
423
%.hex: %.elf
424
	@echo
425
	@echo $(MSG_FLASH) $@
426
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
427

    
428
%.eep: %.elf
429
	@echo
430
	@echo $(MSG_EEPROM) $@
431
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
432
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
433

    
434
# Create extended listing file from ELF output file.
435
%.lss: %.elf
436
	@echo
437
	@echo $(MSG_EXTENDED_LISTING) $@
438
	$(OBJDUMP) -h -S $< > $@
439

    
440
# Create a symbol table from ELF output file.
441
%.sym: %.elf
442
	@echo
443
	@echo $(MSG_SYMBOL_TABLE) $@
444
	$(NM) -n $< > $@
445

    
446

    
447

    
448
# Link: create ELF output file from object files.
449
.SECONDARY : $(TARGET).elf
450
.PRECIOUS : $(OBJ)
451
%.elf: $(OBJ)
452
	@echo
453
	@echo $(MSG_LINKING) $@
454
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
455

    
456

    
457
# Compile: create object files from C source files.
458
%.o : %.c
459
	@echo
460
	@echo $(MSG_COMPILING) $<
461
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
462

    
463

    
464
# Compile: create assembler files from C source files.
465
%.s : %.c
466
	$(CC) -S $(ALL_CFLAGS) $< -o $@
467

    
468

    
469
# Assemble: create object files from assembler source files.
470
%.o : %.S
471
	@echo
472
	@echo $(MSG_ASSEMBLING) $<
473
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
474

    
475
# Create preprocessed source for use in sending a bug report.
476
%.i : %.c
477
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
478

    
479

    
480
# Target: clean project.
481
clean: begin clean_list end
482

    
483
clean_list :
484
	@echo
485
	@echo $(MSG_CLEANING)
486
	$(REMOVE) $(TARGET).hex
487
	$(REMOVE) $(TARGET).eep
488
	$(REMOVE) $(TARGET).cof
489
	$(REMOVE) $(TARGET).elf
490
	$(REMOVE) $(TARGET).map
491
	$(REMOVE) $(TARGET).sym
492
	$(REMOVE) $(TARGET).lss
493
	$(REMOVE) $(OBJ)
494
	$(REMOVE) $(LST)
495
	$(REMOVE) $(SRC:.c=.s)
496
	$(REMOVE) $(SRC:.c=.d)
497
	$(REMOVE) .dep/*
498

    
499

    
500

    
501
# Include the dependency files.
502
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
503

    
504

    
505
# Listing of phony targets.
506
.PHONY : all begin finish end sizebefore sizeafter gccversion \
507
build elf hex eep lss sym coff extcoff \
508
clean clean_list program debug gdb-config
509