Project

General

Profile

Statistics
| Revision:

root / branches / autonomous_recharging / code / projects / autonomous_recharging / archs / test / Makefile @ 1390

History | View | Annotate | Download (13.9 KB)

1
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik Rouleau
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging, 
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40

    
41

    
42
# MCU name
43
MCU = attiny861
44

    
45

    
46
# Processor frequency.
47
#     This will define a symbol, F_CPU, in all source code files equal to the 
48
#     processor frequency. You can then use this symbol in your source code to 
49
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
50
#     automatically to create a 32-bit value in your source code.
51
F_CPU = 8000000
52

    
53

    
54
# Output format. (can be srec, ihex, binary)
55
FORMAT = ihex
56

    
57

    
58
# Target file name (without extension).
59
TARGET = main
60

    
61

    
62
# List C source files here. (C dependencies are automatically generated.)
63
SRC = $(TARGET).c
64

    
65

    
66
# List Assembler source files here.
67
#     Make them always end in a capital .S.  Files ending in a lowercase .s
68
#     will not be considered source files but generated files (assembler
69
#     output from the compiler), and will be deleted upon "make clean"!
70
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
71
#     it will preserve the spelling of the filenames, and gcc itself does
72
#     care about how the name is spelled on its command-line.
73
ASRC = 
74

    
75

    
76
# Optimization level, can be [0, 1, 2, 3, s]. 
77
#     0 = turn off optimization. s = optimize for size.
78
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
79
OPT = s
80

    
81

    
82
# Debugging format.
83
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
84
#     AVR Studio 4.10 requires dwarf-2.
85
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
86
DEBUG = dwarf-2
87

    
88

    
89
# List any extra directories to look for include files here.
90
#     Each directory must be seperated by a space.
91
#     Use forward slashes for directory separators.
92
#     For a directory that has spaces, enclose it in quotes.
93
#EXTRAINCDIRS = C:\WinAVR\include\fwr
94

    
95

    
96
# Compiler flag to set the C Standard level.
97
#     c89   = "ANSI" C
98
#     gnu89 = c89 plus GCC extensions
99
#     c99   = ISO C99 standard (not yet fully implemented)
100
#     gnu99 = c99 plus GCC extensions
101
CSTANDARD = -std=gnu99
102

    
103

    
104
# Place -D or -U options here
105
CDEFS = -DF_CPU=$(F_CPU)UL
106

    
107

    
108
# Place -I options here
109
CINCS =
110

    
111

    
112

    
113
#---------------- Compiler Options ----------------
114
#  -g*:          generate debugging information
115
#  -O*:          optimization level
116
#  -f...:        tuning, see GCC manual and avr-libc documentation
117
#  -Wall...:     warning level
118
#  -Wa,...:      tell GCC to pass this to the assembler.
119
#    -adhlns...: create assembler listing
120
CFLAGS = -g$(DEBUG)
121
CFLAGS += $(CDEFS) $(CINCS)
122
CFLAGS += -O$(OPT)
123
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
124
CFLAGS += -Wall -Wstrict-prototypes
125
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
126
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
127
CFLAGS += $(CSTANDARD)
128

    
129

    
130
#---------------- Assembler Options ----------------
131
#  -Wa,...:   tell GCC to pass this to the assembler.
132
#  -ahlms:    create listing
133
#  -gstabs:   have the assembler create line number information; note that
134
#             for use in COFF files, additional information about filenames
135
#             and function names needs to be present in the assembler source
136
#             files -- see avr-libc docs [FIXME: not yet described there]
137
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
138

    
139

    
140
#---------------- Library Options ----------------
141
# Minimalistic printf version
142
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
143

    
144
# Floating point printf version (requires MATH_LIB = -lm below)
145
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
146

    
147
# If this is left blank, then it will use the Standard printf version.
148
PRINTF_LIB = 
149
#PRINTF_LIB = $(PRINTF_LIB_MIN)
150
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
151

    
152

    
153
# Minimalistic scanf version
154
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
155

    
156
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
157
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
158

    
159
# If this is left blank, then it will use the Standard scanf version.
160
SCANF_LIB = 
161
#SCANF_LIB = $(SCANF_LIB_MIN)
162
#SCANF_LIB = $(SCANF_LIB_FLOAT)
163

    
164

    
165
MATH_LIB = -lm
166

    
167

    
168

    
169
#---------------- External Memory Options ----------------
170

    
171
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
172
# used for variables (.data/.bss) and heap (malloc()).
173
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
174

    
175
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
176
# only used for heap (malloc()).
177
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
178

    
179
EXTMEMOPTS =
180

    
181

    
182

    
183
#---------------- Linker Options ----------------
184
#  -Wl,...:     tell GCC to pass this to linker.
185
#    -Map:      create map file
186
#    --cref:    add cross reference to  map file
187
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
188
LDFLAGS += $(EXTMEMOPTS)
189
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
190

    
191

    
192

    
193
#---------------- Programming Options (avrdude) ----------------
194

    
195
# Programming hardware: alf avr910 avrisp bascom bsd 
196
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
197
#
198
# Type: avrdude -c ?
199
# to get a full listing.
200
#
201
AVRDUDE_PROGRAMMER = avrisp
202

    
203
# com1 = serial port. Use lpt1 to connect to parallel port.
204
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
205
# programmer connected to serial device
206

    
207
AVRDUDE_WRITE_FLASH = -b 4800 -U flash:w:$(TARGET).hex
208
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
209

    
210

    
211
# Uncomment the following if you want avrdude's erase cycle counter.
212
# Note that this counter needs to be initialized first using -Yn,
213
# see avrdude manual.
214
#AVRDUDE_ERASE_COUNTER = -y
215

    
216
# Uncomment the following if you do /not/ wish a verification to be
217
# performed after programming the device.
218
#AVRDUDE_NO_VERIFY = -V
219

    
220
# Increase verbosity level.  Please use this when submitting bug
221
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
222
# to submit bug reports.
223
#AVRDUDE_VERBOSE = -v -v
224

    
225
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
226
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
227
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
228
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
229

    
230

    
231

    
232
#---------------- Debugging Options ----------------
233

    
234
# For simulavr only - target MCU frequency.
235
DEBUG_MFREQ = $(F_CPU)
236

    
237
# Set the DEBUG_UI to either gdb or insight.
238
# DEBUG_UI = gdb
239
DEBUG_UI = insight
240

    
241
# Set the debugging back-end to either avarice, simulavr.
242
DEBUG_BACKEND = avarice
243
#DEBUG_BACKEND = simulavr
244

    
245
# GDB Init Filename.
246
GDBINIT_FILE = __avr_gdbinit
247

    
248
# When using avarice settings for the JTAG
249
JTAG_DEV = /dev/com1
250

    
251
# Debugging port used to communicate between GDB / avarice / simulavr.
252
DEBUG_PORT = 4242
253

    
254
# Debugging host used to communicate between GDB / avarice / simulavr, normally
255
#     just set to localhost unless doing some sort of crazy debugging when 
256
#     avarice is running on a different computer.
257
DEBUG_HOST = localhost
258

    
259

    
260

    
261
#============================================================================
262

    
263

    
264
# Define programs and commands.
265
SHELL = sh
266
CC = avr-gcc
267
OBJCOPY = avr-objcopy
268
OBJDUMP = avr-objdump
269
SIZE = avr-size
270
NM = avr-nm
271
AVRDUDE = avrdude
272
REMOVE = rm -f
273
COPY = cp
274
WINSHELL = cmd
275

    
276

    
277
# Define Messages
278
# English
279
MSG_ERRORS_NONE = Errors: none
280
MSG_BEGIN = -------- begin --------
281
MSG_END = --------  end  --------
282
MSG_SIZE_BEFORE = Size before: 
283
MSG_SIZE_AFTER = Size after:
284
MSG_COFF = Converting to AVR COFF:
285
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
286
MSG_FLASH = Creating load file for Flash:
287
MSG_EEPROM = Creating load file for EEPROM:
288
MSG_EXTENDED_LISTING = Creating Extended Listing:
289
MSG_SYMBOL_TABLE = Creating Symbol Table:
290
MSG_LINKING = Linking:
291
MSG_COMPILING = Compiling:
292
MSG_ASSEMBLING = Assembling:
293
MSG_CLEANING = Cleaning project:
294

    
295

    
296

    
297

    
298
# Define all object files.
299
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
300

    
301
# Define all listing files.
302
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) 
303

    
304

    
305
# Compiler flags to generate dependency files.
306
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
307

    
308

    
309
# Combine all necessary flags and optional flags.
310
# Add target processor to flags.
311
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
312
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
313

    
314

    
315

    
316

    
317

    
318
# Default target.
319
all: begin gccversion sizebefore build sizeafter end
320

    
321
build: elf hex eep lss sym
322

    
323
elf: $(TARGET).elf
324
hex: $(TARGET).hex
325
eep: $(TARGET).eep
326
lss: $(TARGET).lss 
327
sym: $(TARGET).sym
328

    
329

    
330

    
331
# Eye candy.
332
# AVR Studio 3.x does not check make's exit code but relies on
333
# the following magic strings to be generated by the compile job.
334
begin:
335
	@echo
336
	@echo $(MSG_BEGIN)
337

    
338
end:
339
	@echo $(MSG_END)
340
	@echo
341

    
342

    
343
# Display size of file.
344
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
345
ELFSIZE = $(SIZE) -A $(TARGET).elf
346
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
347

    
348
sizebefore:
349
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
350
	$(AVRMEM) 2>/dev/null; echo; fi
351

    
352
sizeafter:
353
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
354
	$(AVRMEM) 2>/dev/null; echo; fi
355

    
356

    
357

    
358
# Display compiler version information.
359
gccversion : 
360
	@$(CC) --version
361

    
362

    
363

    
364
# Program the device.  
365
program: $(TARGET).hex $(TARGET).eep
366
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
367

    
368

    
369
# Generate avr-gdb config/init file which does the following:
370
#     define the reset signal, load the target file, connect to target, and set 
371
#     a breakpoint at main().
372
gdb-config: 
373
	@$(REMOVE) $(GDBINIT_FILE)
374
	@echo define reset >> $(GDBINIT_FILE)
375
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
376
	@echo end >> $(GDBINIT_FILE)
377
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
378
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
379
ifeq ($(DEBUG_BACKEND),simulavr)
380
	@echo load  >> $(GDBINIT_FILE)
381
endif	
382
	@echo break main >> $(GDBINIT_FILE)
383
	
384
debug: gdb-config $(TARGET).elf
385
ifeq ($(DEBUG_BACKEND), avarice)
386
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
387
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
388
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
389
	@$(WINSHELL) /c pause
390
	
391
else
392
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
393
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
394
endif
395
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
396
	
397

    
398

    
399

    
400
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
401
COFFCONVERT=$(OBJCOPY) --debugging \
402
--change-section-address .data-0x800000 \
403
--change-section-address .bss-0x800000 \
404
--change-section-address .noinit-0x800000 \
405
--change-section-address .eeprom-0x810000 
406

    
407

    
408
coff: $(TARGET).elf
409
	@echo
410
	@echo $(MSG_COFF) $(TARGET).cof
411
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
412

    
413

    
414
extcoff: $(TARGET).elf
415
	@echo
416
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
417
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
418

    
419

    
420

    
421
# Create final output files (.hex, .eep) from ELF output file.
422
%.hex: %.elf
423
	@echo
424
	@echo $(MSG_FLASH) $@
425
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
426

    
427
%.eep: %.elf
428
	@echo
429
	@echo $(MSG_EEPROM) $@
430
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
431
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
432

    
433
# Create extended listing file from ELF output file.
434
%.lss: %.elf
435
	@echo
436
	@echo $(MSG_EXTENDED_LISTING) $@
437
	$(OBJDUMP) -h -S $< > $@
438

    
439
# Create a symbol table from ELF output file.
440
%.sym: %.elf
441
	@echo
442
	@echo $(MSG_SYMBOL_TABLE) $@
443
	$(NM) -n $< > $@
444

    
445

    
446

    
447
# Link: create ELF output file from object files.
448
.SECONDARY : $(TARGET).elf
449
.PRECIOUS : $(OBJ)
450
%.elf: $(OBJ)
451
	@echo
452
	@echo $(MSG_LINKING) $@
453
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
454

    
455

    
456
# Compile: create object files from C source files.
457
%.o : %.c
458
	@echo
459
	@echo $(MSG_COMPILING) $<
460
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
461

    
462

    
463
# Compile: create assembler files from C source files.
464
%.s : %.c
465
	$(CC) -S $(ALL_CFLAGS) $< -o $@
466

    
467

    
468
# Assemble: create object files from assembler source files.
469
%.o : %.S
470
	@echo
471
	@echo $(MSG_ASSEMBLING) $<
472
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
473

    
474
# Create preprocessed source for use in sending a bug report.
475
%.i : %.c
476
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
477

    
478

    
479
# Target: clean project.
480
clean: begin clean_list end
481

    
482
clean_list :
483
	@echo
484
	@echo $(MSG_CLEANING)
485
	$(REMOVE) $(TARGET).hex
486
	$(REMOVE) $(TARGET).eep
487
	$(REMOVE) $(TARGET).cof
488
	$(REMOVE) $(TARGET).elf
489
	$(REMOVE) $(TARGET).map
490
	$(REMOVE) $(TARGET).sym
491
	$(REMOVE) $(TARGET).lss
492
	$(REMOVE) $(OBJ)
493
	$(REMOVE) $(LST)
494
	$(REMOVE) $(SRC:.c=.s)
495
	$(REMOVE) $(SRC:.c=.d)
496
	$(REMOVE) .dep/*
497

    
498

    
499

    
500
# Include the dependency files.
501
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
502

    
503

    
504
# Listing of phony targets.
505
.PHONY : all begin finish end sizebefore sizeafter gccversion \
506
build elf hex eep lss sym coff extcoff \
507
clean clean_list program debug gdb-config
508