Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / libwireless / jni / robot_test / Makefile @ 1390

History | View | Annotate | Download (14.3 KB)

1 940 rcahoon
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik Rouleau
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging,
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40
41
#if you want your code to work on the Firefly++ and not Firefly+
42
#then add the -DFFPP line to CDEFS
43
COLONYROOT = y:
44
CDEFS =
45
#-DFFPP
46
47
# MCU name
48
MCU = atmega128
49
50
51
# Processor frequency.
52
#     This will define a symbol, F_CPU, in all source code files equal to the
53
#     processor frequency. You can then use this symbol in your source code to
54
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
55
#     automatically to create a 32-bit value in your source code.
56
F_CPU = 8000000
57
58
59
# Output format. (can be srec, ihex, binary)
60
FORMAT = ihex
61
62
63
# Target file name (without extension).
64
TARGET = main
65
66
67
# List C source files here. (C dependencies are automatically generated.)
68
SRC = $(wildcard *.c)
69
#$(TARGET).c
70
71
72
# List Assembler source files here.
73
#     Make them always end in a capital .S.  Files ending in a lowercase .s
74
#     will not be considered source files but generated files (assembler
75
#     output from the compiler), and will be deleted upon "make clean"!
76
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
77
#     it will preserve the spelling of the filenames, and gcc itself does
78
#     care about how the name is spelled on its command-line.
79
ASRC =
80
81
82
# Optimization level, can be [0, 1, 2, 3, s].
83
#     0 = turn off optimization. s = optimize for size.
84
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
85
OPT = s
86
87
88
# Debugging format.
89
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
90
#     AVR Studio 4.10 requires dwarf-2.
91
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
92
DEBUG =
93
94
95
# List any extra directories to look for include files here.
96
#     Each directory must be seperated by a space.
97
#     Use forward slashes for directory separators.
98
#     For a directory that has spaces, enclose it in quotes.
99
EXTRAINCDIRS = $(COLONYROOT)/code/firefly_plus_lib
100
#C:\WinAVR\include\fwr
101
102
103
# Compiler flag to set the C Standard level.
104
#     c89   = "ANSI" C
105
#     gnu89 = c89 plus GCC extensions
106
#     c99   = ISO C99 standard (not yet fully implemented)
107
#     gnu99 = c99 plus GCC extensions
108
CSTANDARD = -std=gnu99
109
110
111
# Place -D or -U options here
112
CDEFS += -DF_CPU=$(F_CPU)UL
113
CDEFS += -DFFP
114
115
116
# Place -I options here
117
CINCS = -I../../lib -I../../../libdragonfly -L../../lib -L../../../libdragonfly
118
119
120
121
#---------------- Compiler Options ----------------
122
#  -g*:          generate debugging information
123
#  -O*:          optimization level
124
#  -f...:        tuning, see GCC manual and avr-libc documentation
125
#  -Wall...:     warning level
126
#  -Wa,...:      tell GCC to pass this to the assembler.
127
#    -adhlns...: create assembler listing
128
CFLAGS = -g$(DEBUG)
129
CFLAGS += $(CDEFS) $(CINCS)
130
CFLAGS += -O$(OPT)
131
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
132
CFLAGS += -Wall -Wstrict-prototypes
133
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
134
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
135
CFLAGS += $(CSTANDARD)
136
CFLAGS += -DROBOT
137
138
139
#---------------- Assembler Options ----------------
140
#  -Wa,...:   tell GCC to pass this to the assembler.
141
#  -ahlms:    create listing
142
#  -gstabs:   have the assembler create line number information; note that
143
#             for use in COFF files, additional information about filenames
144
#             and function names needs to be present in the assembler source
145
#             files -- see avr-libc docs [FIXME: not yet described there]
146
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
147
148
149
#---------------- Library Options ----------------
150
# Minimalistic printf version
151
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
152
153
# Floating point printf version (requires MATH_LIB = -lm below)
154
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
155
156
# If this is left blank, then it will use the Standard printf version.
157
PRINTF_LIB =
158
#PRINTF_LIB = $(PRINTF_LIB_MIN)
159
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
160
161
162
# Minimalistic scanf version
163
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
164
165
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
166
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
167
168
# If this is left blank, then it will use the Standard scanf version.
169
SCANF_LIB =
170
#SCANF_LIB = $(SCANF_LIB_MIN)
171
#SCANF_LIB = $(SCANF_LIB_FLOAT)
172
173
174
MATH_LIB = -lm
175
176
177
178
#---------------- External Memory Options ----------------
179
180
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
181
# used for variables (.data/.bss) and heap (malloc()).
182
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
183
184
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
185
# only used for heap (malloc()).
186
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
187
188
EXTMEMOPTS =
189
190
191
192
#---------------- Linker Options ----------------
193
#  -Wl,...:     tell GCC to pass this to linker.
194
#    -Map:      create map file
195
#    --cref:    add cross reference to  map file
196
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
197
LDFLAGS += $(EXTMEMOPTS)
198
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
199
LDFLAGS += -lwireless -ldragonfly
200
201
202
203
#---------------- Programming Options (avrdude) ----------------
204
205
# Programming hardware: alf avr910 avrisp bascom bsd
206
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
207
#
208
# Type: avrdude -c ?
209
# to get a full listing.
210
#
211
AVRDUDE_PROGRAMMER = avrisp
212
213
# com1 = serial port. Use lpt1 to connect to parallel port.
214 1390 chihsiuh
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
215 940 rcahoon
# programmer connected to serial device
216
217
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
218
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
219
220
221
# Uncomment the following if you want avrdude's erase cycle counter.
222
# Note that this counter needs to be initialized first using -Yn,
223
# see avrdude manual.
224
#AVRDUDE_ERASE_COUNTER = -y
225
226
# Uncomment the following if you do /not/ wish a verification to be
227
# performed after programming the device.
228
#AVRDUDE_NO_VERIFY = -V
229
230
# Increase verbosity level.  Please use this when submitting bug
231
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
232
# to submit bug reports.
233
#AVRDUDE_VERBOSE = -v -v
234
235
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
236
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
237
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
238
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
239
240
#don't check for device signature
241
AVRDUDE_FLAGS += -F
242
AVRDUDE_FLAGS += -D
243
244
245
246
#---------------- Debugging Options ----------------
247
248
# For simulavr only - target MCU frequency.
249
DEBUG_MFREQ = $(F_CPU)
250
251
# Set the DEBUG_UI to either gdb or insight.
252
# DEBUG_UI = gdb
253
DEBUG_UI = insight
254
255
# Set the debugging back-end to either avarice, simulavr.
256
DEBUG_BACKEND = avarice
257
#DEBUG_BACKEND = simulavr
258
259
# GDB Init Filename.
260
GDBINIT_FILE = __avr_gdbinit
261
262
# When using avarice settings for the JTAG
263
JTAG_DEV = /dev/com1
264
265
# Debugging port used to communicate between GDB / avarice / simulavr.
266
DEBUG_PORT = 4242
267
268
# Debugging host used to communicate between GDB / avarice / simulavr, normally
269
#     just set to localhost unless doing some sort of crazy debugging when
270
#     avarice is running on a different computer.
271
DEBUG_HOST = localhost
272
273
274
275
#============================================================================
276
277
278
# Define programs and commands.
279
SHELL = sh
280
CC = avr-gcc
281
OBJCOPY = avr-objcopy
282
OBJDUMP = avr-objdump
283
SIZE = avr-size
284
NM = avr-nm
285
AVRDUDE = avrdude
286
REMOVE = rm -f
287
REMOVEDIR = rm -rf
288
COPY = cp
289
WINSHELL = cmd
290
291
292
# Define Messages
293
# English
294
MSG_ERRORS_NONE = Errors: none
295
MSG_BEGIN = -------- begin --------
296
MSG_END = --------  end  --------
297
MSG_SIZE_BEFORE = Size before:
298
MSG_SIZE_AFTER = Size after:
299
MSG_COFF = Converting to AVR COFF:
300
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
301
MSG_FLASH = Creating load file for Flash:
302
MSG_EEPROM = Creating load file for EEPROM:
303
MSG_EXTENDED_LISTING = Creating Extended Listing:
304
MSG_SYMBOL_TABLE = Creating Symbol Table:
305
MSG_LINKING = Linking:
306
MSG_COMPILING = Compiling:
307
MSG_ASSEMBLING = Assembling:
308
MSG_CLEANING = Cleaning project:
309
310
311
312
313
# Define all object files.
314
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
315
316
# Define all listing files.
317
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
318
319
320
# Compiler flags to generate dependency files.
321
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
322
323
324
# Combine all necessary flags and optional flags.
325
# Add target processor to flags.
326
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
327
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
328
329
330
331
332
333
# Default target.
334
all: begin gccversion sizebefore build sizeafter end
335
336
build: elf hex eep lss sym
337
338
elf: $(TARGET).elf
339
hex: $(TARGET).hex
340
eep: $(TARGET).eep
341
lss: $(TARGET).lss
342
sym: $(TARGET).sym
343
344
345
346
# Eye candy.
347
# AVR Studio 3.x does not check make's exit code but relies on
348
# the following magic strings to be generated by the compile job.
349
begin:
350
	@echo
351
	@echo $(MSG_BEGIN)
352
353
end:
354
	@echo $(MSG_END)
355
	@echo
356
357
358
# Display size of file.
359
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
360
ELFSIZE = $(SIZE) -A $(TARGET).elf
361
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
362
363
sizebefore:
364
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
365
	$(AVRMEM) 2>/dev/null; echo; fi
366
367
sizeafter:
368
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
369
	$(AVRMEM) 2>/dev/null; echo; fi
370
371
372
373
# Display compiler version information.
374
gccversion :
375
	@$(CC) --version
376
377
378
379
# Program the device.
380
program: $(TARGET).hex $(TARGET).eep
381
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
382
383
384
# Generate avr-gdb config/init file which does the following:
385
#     define the reset signal, load the target file, connect to target, and set
386
#     a breakpoint at main().
387
gdb-config:
388
	@$(REMOVE) $(GDBINIT_FILE)
389
	@echo define reset >> $(GDBINIT_FILE)
390
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
391
	@echo end >> $(GDBINIT_FILE)
392
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
393
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
394
ifeq ($(DEBUG_BACKEND),simulavr)
395
	@echo load  >> $(GDBINIT_FILE)
396
endif
397
	@echo break main >> $(GDBINIT_FILE)
398
399
debug: gdb-config $(TARGET).elf
400
ifeq ($(DEBUG_BACKEND), avarice)
401
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
402
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
403
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
404
	@$(WINSHELL) /c pause
405
406
else
407
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
408
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
409
endif
410
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
411
412
413
414
415
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
416
COFFCONVERT=$(OBJCOPY) --debugging \
417
--change-section-address .data-0x800000 \
418
--change-section-address .bss-0x800000 \
419
--change-section-address .noinit-0x800000 \
420
--change-section-address .eeprom-0x810000
421
422
423
coff: $(TARGET).elf
424
	@echo
425
	@echo $(MSG_COFF) $(TARGET).cof
426
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
427
428
429
extcoff: $(TARGET).elf
430
	@echo
431
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
432
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
433
434
435
436
# Create final output files (.hex, .eep) from ELF output file.
437
%.hex: %.elf
438
	@echo
439
	@echo $(MSG_FLASH) $@
440
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
441
442
%.eep: %.elf
443
	@echo
444
	@echo $(MSG_EEPROM) $@
445
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
446
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
447
448
# Create extended listing file from ELF output file.
449
%.lss: %.elf
450
	@echo
451
	@echo $(MSG_EXTENDED_LISTING) $@
452
	$(OBJDUMP) -h -S $< > $@
453
454
# Create a symbol table from ELF output file.
455
%.sym: %.elf
456
	@echo
457
	@echo $(MSG_SYMBOL_TABLE) $@
458
	$(NM) -n $< > $@
459
460
461
462
# Link: create ELF output file from object files.
463
.SECONDARY : $(TARGET).elf
464
.PRECIOUS : $(OBJ)
465
%.elf: $(OBJ)
466
	@echo
467
	@echo $(MSG_LINKING) $@
468
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
469
470
471
# Compile: create object files from C source files.
472
%.o : %.c
473
	@echo
474
	@echo $(MSG_COMPILING) $<
475
	$(CC) -c $(ALL_CFLAGS) $< -o $@
476
477
478
# Compile: create assembler files from C source files.
479
%.s : %.c
480
	$(CC) -S $(ALL_CFLAGS) $< -o $@
481
482
483
# Assemble: create object files from assembler source files.
484
%.o : %.S
485
	@echo
486
	@echo $(MSG_ASSEMBLING) $<
487
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
488
489
# Create preprocessed source for use in sending a bug report.
490
%.i : %.c
491
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
492
493
494
# Target: clean project.
495
clean: begin clean_list end
496
497
clean_list :
498
	@echo
499
	@echo $(MSG_CLEANING)
500
	$(REMOVE) $(TARGET).hex
501
	$(REMOVE) $(TARGET).eep
502
	$(REMOVE) $(TARGET).cof
503
	$(REMOVE) $(TARGET).elf
504
	$(REMOVE) $(TARGET).map
505
	$(REMOVE) $(TARGET).sym
506
	$(REMOVE) $(TARGET).lss
507
	$(REMOVE) $(OBJ)
508
	$(REMOVE) $(LST)
509
	$(REMOVE) $(SRC:.c=.s)
510
	$(REMOVE) $(SRC:.c=.d)
511
	$(REMOVEDIR) .dep
512
513
514
515
# Include the dependency files.
516
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
517
518
519
# Listing of phony targets.
520
.PHONY : all begin finish end sizebefore sizeafter gccversion \
521
build elf hex eep lss sym coff extcoff \
522
clean clean_list program debug gdb-config