Project

General

Profile

Statistics
| Revision:

root / branches / rbom / code / projects / colonet / utilities / manual_control / manualControlRobot / Makefile @ 1390

History | View | Annotate | Download (14.2 KB)

1 13 emarinel
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik Rouleau
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging,
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40
41
#if you want your code to work on the Firefly++ and not Firefly+
42
#then add the -DFFPP line to CDEFS
43
COLONYROOT = y:
44
CDEFS =
45
#-DFFPP
46
47
# MCU name
48
MCU = atmega128
49
50
51
# Processor frequency.
52
#     This will define a symbol, F_CPU, in all source code files equal to the
53
#     processor frequency. You can then use this symbol in your source code to
54
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
55
#     automatically to create a 32-bit value in your source code.
56
F_CPU = 16000000
57
58
59
# Output format. (can be srec, ihex, binary)
60
FORMAT = ihex
61
62
63
# Target file name (without extension).
64
TARGET = robotWirelessRelay
65
66
67
# List C source files here. (C dependencies are automatically generated.)
68
SRC = $(wildcard *.c)
69
#$(TARGET).c
70
71
72
# List Assembler source files here.
73
#     Make them always end in a capital .S.  Files ending in a lowercase .s
74
#     will not be considered source files but generated files (assembler
75
#     output from the compiler), and will be deleted upon "make clean"!
76
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
77
#     it will preserve the spelling of the filenames, and gcc itself does
78
#     care about how the name is spelled on its command-line.
79
ASRC =
80
81
82
# Optimization level, can be [0, 1, 2, 3, s].
83
#     0 = turn off optimization. s = optimize for size.
84
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
85
OPT = s
86
87
88
# Debugging format.
89
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
90
#     AVR Studio 4.10 requires dwarf-2.
91
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
92
DEBUG = dwarf-2
93
94
95
# List any extra directories to look for include files here.
96
#     Each directory must be seperated by a space.
97
#     Use forward slashes for directory separators.
98
#     For a directory that has spaces, enclose it in quotes.
99
EXTRAINCDIRS = $(COLONYROOT)/code/firefly_plus_lib
100
#C:\WinAVR\include\fwr
101
102
103
# Compiler flag to set the C Standard level.
104
#     c89   = "ANSI" C
105
#     gnu89 = c89 plus GCC extensions
106
#     c99   = ISO C99 standard (not yet fully implemented)
107
#     gnu99 = c99 plus GCC extensions
108
CSTANDARD = -std=gnu99
109
110
111
# Place -D or -U options here
112
CDEFS += -DF_CPU=$(F_CPU)UL
113
114
115
# Place -I options here
116
CINCS =
117
118
119
120
#---------------- Compiler Options ----------------
121
#  -g*:          generate debugging information
122
#  -O*:          optimization level
123
#  -f...:        tuning, see GCC manual and avr-libc documentation
124
#  -Wall...:     warning level
125
#  -Wa,...:      tell GCC to pass this to the assembler.
126
#    -adhlns...: create assembler listing
127
CFLAGS = -g$(DEBUG)
128
CFLAGS += $(CDEFS) $(CINCS)
129
CFLAGS += -O$(OPT)
130
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
131
CFLAGS += -Wall -Wstrict-prototypes
132
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
133
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
134
CFLAGS += $(CSTANDARD)
135
136
137
#---------------- Assembler Options ----------------
138
#  -Wa,...:   tell GCC to pass this to the assembler.
139
#  -ahlms:    create listing
140
#  -gstabs:   have the assembler create line number information; note that
141
#             for use in COFF files, additional information about filenames
142
#             and function names needs to be present in the assembler source
143
#             files -- see avr-libc docs [FIXME: not yet described there]
144
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
145
146
147
#---------------- Library Options ----------------
148
# Minimalistic printf version
149
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
150
151
# Floating point printf version (requires MATH_LIB = -lm below)
152
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
153
154
# If this is left blank, then it will use the Standard printf version.
155
PRINTF_LIB =
156
#PRINTF_LIB = $(PRINTF_LIB_MIN)
157
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
158
159
160
# Minimalistic scanf version
161
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
162
163
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
164
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
165
166
# If this is left blank, then it will use the Standard scanf version.
167
SCANF_LIB =
168
#SCANF_LIB = $(SCANF_LIB_MIN)
169
#SCANF_LIB = $(SCANF_LIB_FLOAT)
170
171
172
MATH_LIB = -lm
173
174
175
176
#---------------- External Memory Options ----------------
177
178
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
179
# used for variables (.data/.bss) and heap (malloc()).
180
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
181
182
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
183
# only used for heap (malloc()).
184
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
185
186
EXTMEMOPTS =
187
188
189
190
#---------------- Linker Options ----------------
191
#  -Wl,...:     tell GCC to pass this to linker.
192
#    -Map:      create map file
193
#    --cref:    add cross reference to  map file
194
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
195
LDFLAGS += $(EXTMEMOPTS)
196
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
197
198
199
200
#---------------- Programming Options (avrdude) ----------------
201
202
# Programming hardware: alf avr910 avrisp bascom bsd
203
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
204
#
205
# Type: avrdude -c ?
206
# to get a full listing.
207
#
208
AVRDUDE_PROGRAMMER = avrisp
209
210
# com1 = serial port. Use lpt1 to connect to parallel port.
211 1390 chihsiuh
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
212 13 emarinel
# programmer connected to serial device
213
214
AVRDUDE_WRITE_FLASH = -b 9600 -U flash:w:$(TARGET).hex
215
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
216
217
218
# Uncomment the following if you want avrdude's erase cycle counter.
219
# Note that this counter needs to be initialized first using -Yn,
220
# see avrdude manual.
221
#AVRDUDE_ERASE_COUNTER = -y
222
223
# Uncomment the following if you do /not/ wish a verification to be
224
# performed after programming the device.
225
AVRDUDE_NO_VERIFY = -V
226
227
# Increase verbosity level.  Please use this when submitting bug
228
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
229
# to submit bug reports.
230
#AVRDUDE_VERBOSE = -v -v
231
232
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
233
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
234
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
235
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
236
237
#don't check for device signature
238
AVRDUDE_FLAGS += -F
239
240
241
242
#---------------- Debugging Options ----------------
243
244
# For simulavr only - target MCU frequency.
245
DEBUG_MFREQ = $(F_CPU)
246
247
# Set the DEBUG_UI to either gdb or insight.
248
# DEBUG_UI = gdb
249
DEBUG_UI = insight
250
251
# Set the debugging back-end to either avarice, simulavr.
252
DEBUG_BACKEND = avarice
253
#DEBUG_BACKEND = simulavr
254
255
# GDB Init Filename.
256
GDBINIT_FILE = __avr_gdbinit
257
258
# When using avarice settings for the JTAG
259
JTAG_DEV = /dev/com1
260
261
# Debugging port used to communicate between GDB / avarice / simulavr.
262
DEBUG_PORT = 4242
263
264
# Debugging host used to communicate between GDB / avarice / simulavr, normally
265
#     just set to localhost unless doing some sort of crazy debugging when
266
#     avarice is running on a different computer.
267
DEBUG_HOST = localhost
268
269
270
271
#============================================================================
272
273
274
# Define programs and commands.
275
SHELL = sh
276
CC = avr-gcc
277
OBJCOPY = avr-objcopy
278
OBJDUMP = avr-objdump
279
SIZE = avr-size
280
NM = avr-nm
281
AVRDUDE = avrdude
282
REMOVE = rm -f
283
REMOVEDIR = rm -rf
284
COPY = cp
285
WINSHELL = cmd
286
287
288
# Define Messages
289
# English
290
MSG_ERRORS_NONE = Errors: none
291
MSG_BEGIN = -------- begin --------
292
MSG_END = --------  end  --------
293
MSG_SIZE_BEFORE = Size before:
294
MSG_SIZE_AFTER = Size after:
295
MSG_COFF = Converting to AVR COFF:
296
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
297
MSG_FLASH = Creating load file for Flash:
298
MSG_EEPROM = Creating load file for EEPROM:
299
MSG_EXTENDED_LISTING = Creating Extended Listing:
300
MSG_SYMBOL_TABLE = Creating Symbol Table:
301
MSG_LINKING = Linking:
302
MSG_COMPILING = Compiling:
303
MSG_ASSEMBLING = Assembling:
304
MSG_CLEANING = Cleaning project:
305
306
307
308
309
# Define all object files.
310
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
311
312
# Define all listing files.
313
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
314
315
316
# Compiler flags to generate dependency files.
317
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
318
319
320
# Combine all necessary flags and optional flags.
321
# Add target processor to flags.
322
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
323
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
324
325
326
327
328
329
# Default target.
330
all: begin gccversion sizebefore build sizeafter end
331
332
build: elf hex eep lss sym
333
334
elf: $(TARGET).elf
335
hex: $(TARGET).hex
336
eep: $(TARGET).eep
337
lss: $(TARGET).lss
338
sym: $(TARGET).sym
339
340
341
342
# Eye candy.
343
# AVR Studio 3.x does not check make's exit code but relies on
344
# the following magic strings to be generated by the compile job.
345
begin:
346
	@echo
347
	@echo $(MSG_BEGIN)
348
349
end:
350
	@echo $(MSG_END)
351
	@echo
352
353
354
# Display size of file.
355
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
356
ELFSIZE = $(SIZE) -A $(TARGET).elf
357
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
358
359
sizebefore:
360
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
361
	$(AVRMEM) 2>/dev/null; echo; fi
362
363
sizeafter:
364
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
365
	$(AVRMEM) 2>/dev/null; echo; fi
366
367
368
369
# Display compiler version information.
370
gccversion :
371
	@$(CC) --version
372
373
374
375
# Program the device.
376
program: $(TARGET).hex $(TARGET).eep
377
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
378
379
380
# Generate avr-gdb config/init file which does the following:
381
#     define the reset signal, load the target file, connect to target, and set
382
#     a breakpoint at main().
383
gdb-config:
384
	@$(REMOVE) $(GDBINIT_FILE)
385
	@echo define reset >> $(GDBINIT_FILE)
386
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
387
	@echo end >> $(GDBINIT_FILE)
388
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
389
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
390
ifeq ($(DEBUG_BACKEND),simulavr)
391
	@echo load  >> $(GDBINIT_FILE)
392
endif
393
	@echo break main >> $(GDBINIT_FILE)
394
395
debug: gdb-config $(TARGET).elf
396
ifeq ($(DEBUG_BACKEND), avarice)
397
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
398
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
399
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
400
	@$(WINSHELL) /c pause
401
402
else
403
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
404
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
405
endif
406
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
407
408
409
410
411
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
412
COFFCONVERT=$(OBJCOPY) --debugging \
413
--change-section-address .data-0x800000 \
414
--change-section-address .bss-0x800000 \
415
--change-section-address .noinit-0x800000 \
416
--change-section-address .eeprom-0x810000
417
418
419
coff: $(TARGET).elf
420
	@echo
421
	@echo $(MSG_COFF) $(TARGET).cof
422
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
423
424
425
extcoff: $(TARGET).elf
426
	@echo
427
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
428
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
429
430
431
432
# Create final output files (.hex, .eep) from ELF output file.
433
%.hex: %.elf
434
	@echo
435
	@echo $(MSG_FLASH) $@
436
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
437
438
%.eep: %.elf
439
	@echo
440
	@echo $(MSG_EEPROM) $@
441
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
442
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
443
444
# Create extended listing file from ELF output file.
445
%.lss: %.elf
446
	@echo
447
	@echo $(MSG_EXTENDED_LISTING) $@
448
	$(OBJDUMP) -h -S $< > $@
449
450
# Create a symbol table from ELF output file.
451
%.sym: %.elf
452
	@echo
453
	@echo $(MSG_SYMBOL_TABLE) $@
454
	$(NM) -n $< > $@
455
456
457
458
# Link: create ELF output file from object files.
459
.SECONDARY : $(TARGET).elf
460
.PRECIOUS : $(OBJ)
461
%.elf: $(OBJ)
462
	@echo
463
	@echo $(MSG_LINKING) $@
464
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
465
466
467
# Compile: create object files from C source files.
468
%.o : %.c
469
	@echo
470
	@echo $(MSG_COMPILING) $<
471
	$(CC) -c $(ALL_CFLAGS) $< -o $@
472
473
474
# Compile: create assembler files from C source files.
475
%.s : %.c
476
	$(CC) -S $(ALL_CFLAGS) $< -o $@
477
478
479
# Assemble: create object files from assembler source files.
480
%.o : %.S
481
	@echo
482
	@echo $(MSG_ASSEMBLING) $<
483
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
484
485
# Create preprocessed source for use in sending a bug report.
486
%.i : %.c
487
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
488
489
490
# Target: clean project.
491
clean: begin clean_list end
492
493
clean_list :
494
	@echo
495
	@echo $(MSG_CLEANING)
496
	$(REMOVE) $(TARGET).hex
497
	$(REMOVE) $(TARGET).eep
498
	$(REMOVE) $(TARGET).cof
499
	$(REMOVE) $(TARGET).elf
500
	$(REMOVE) $(TARGET).map
501
	$(REMOVE) $(TARGET).sym
502
	$(REMOVE) $(TARGET).lss
503
	$(REMOVE) $(OBJ)
504
	$(REMOVE) $(LST)
505
	$(REMOVE) $(SRC:.c=.s)
506
	$(REMOVE) $(SRC:.c=.d)
507
	$(REMOVEDIR) .dep
508
509
510
511
# Include the dependency files.
512
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
513
514
515
# Listing of phony targets.
516
.PHONY : all begin finish end sizebefore sizeafter gccversion \
517
build elf hex eep lss sym coff extcoff \
518
clean clean_list program debug gdb-config