Project

General

Profile

Statistics
| Revision:

root / branches / rbom / code / projects / colonet / testing / robot_routine_reg_test / Makefile @ 1390

History | View | Annotate | Download (14 KB)

1 13 emarinel
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik Rouleau
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging,
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40
41
42
# MCU name
43
MCU = atmega128
44
45
46
# Processor frequency.
47
#     This will define a symbol, F_CPU, in all source code files equal to the
48
#     processor frequency. You can then use this symbol in your source code to
49
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
50
#     automatically to create a 32-bit value in your source code.
51
F_CPU = 16000000
52
53
54
# Output format. (can be srec, ihex, binary)
55
FORMAT = ihex
56
57
58
# Target file name (without extension).
59
TARGET = robot_routine_reg_test
60
61
62
# List C source files here. (C dependencies are automatically generated.)
63
SRC = $(wildcard *.c)
64
#$(TARGET).c
65
66
67
# List Assembler source files here.
68
#     Make them always end in a capital .S.  Files ending in a lowercase .s
69
#     will not be considered source files but generated files (assembler
70
#     output from the compiler), and will be deleted upon "make clean"!
71
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
72
#     it will preserve the spelling of the filenames, and gcc itself does
73
#     care about how the name is spelled on its command-line.
74
ASRC =
75
76
77
# Optimization level, can be [0, 1, 2, 3, s].
78
#     0 = turn off optimization. s = optimize for size.
79
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
80
OPT = s
81
82
83
# Debugging format.
84
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
85
#     AVR Studio 4.10 requires dwarf-2.
86
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
87
DEBUG = dwarf-2
88
89
90
# List any extra directories to look for include files here.
91
#     Each directory must be seperated by a space.
92
#     Use forward slashes for directory separators.
93
#     For a directory that has spaces, enclose it in quotes.
94
EXTRAINCDIRS = c:/roboclub_repository/emarinel/code/colonet/lib c:/roboclub_repository/emarinel/code/firefly_plus_lib
95
96
# Compiler flag to set the C Standard level.
97
#     c89   = "ANSI" C
98
#     gnu89 = c89 plus GCC extensions
99
#     c99   = ISO C99 standard (not yet fully implemented)
100
#     gnu99 = c99 plus GCC extensions
101
CSTANDARD = -std=gnu99
102
103
104
# Place -D or -U options here
105
CDEFS = -DF_CPU=$(F_CPU)UL
106
107
108
# Place -I options here
109
CINCS =
110
111
112
113
#---------------- Compiler Options ----------------
114
#  -g*:          generate debugging information
115
#  -O*:          optimization level
116
#  -f...:        tuning, see GCC manual and avr-libc documentation
117
#  -Wall...:     warning level
118
#  -Wa,...:      tell GCC to pass this to the assembler.
119
#    -adhlns...: create assembler listing
120
CFLAGS = -g$(DEBUG)
121
CFLAGS += $(CDEFS) $(CINCS)
122
CFLAGS += -O$(OPT)
123
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
124
CFLAGS += -Wall -Wstrict-prototypes
125
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
126
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
127
CFLAGS += $(CSTANDARD)
128
129
130
#---------------- Assembler Options ----------------
131
#  -Wa,...:   tell GCC to pass this to the assembler.
132
#  -ahlms:    create listing
133
#  -gstabs:   have the assembler create line number information; note that
134
#             for use in COFF files, additional information about filenames
135
#             and function names needs to be present in the assembler source
136
#             files -- see avr-libc docs [FIXME: not yet described there]
137
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
138
139
140
#---------------- Library Options ----------------
141
# Minimalistic printf version
142
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
143
144
# Floating point printf version (requires MATH_LIB = -lm below)
145
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
146
147
# If this is left blank, then it will use the Standard printf version.
148
PRINTF_LIB =
149
#PRINTF_LIB = $(PRINTF_LIB_MIN)
150
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
151
152
153
# Minimalistic scanf version
154
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
155
156
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
157
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
158
159
# If this is left blank, then it will use the Standard scanf version.
160
SCANF_LIB =
161
#SCANF_LIB = $(SCANF_LIB_MIN)
162
#SCANF_LIB = $(SCANF_LIB_FLOAT)
163
164
165
MATH_LIB = -lm
166
167
168
169
#---------------- External Memory Options ----------------
170
171
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
172
# used for variables (.data/.bss) and heap (malloc()).
173
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
174
175
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
176
# only used for heap (malloc()).
177
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
178
179
EXTMEMOPTS =
180
181
182
183
#---------------- Linker Options ----------------
184
#  -Wl,...:     tell GCC to pass this to linker.
185
#    -Map:      create map file
186
#    --cref:    add cross reference to  map file
187
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
188
LDFLAGS += $(EXTMEMOPTS)
189
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
190
191
192
193
#---------------- Programming Options (avrdude) ----------------
194
195
# Programming hardware: alf avr910 avrisp bascom bsd
196
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
197
#
198
# Type: avrdude -c ?
199
# to get a full listing.
200
#
201
AVRDUDE_PROGRAMMER = avrisp
202
203
# com1 = serial port. Use lpt1 to connect to parallel port.
204 1390 chihsiuh
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
205 13 emarinel
# programmer connected to serial device
206
207
AVRDUDE_WRITE_FLASH = -b 9600 -U flash:w:$(TARGET).hex
208
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
209
210
211
# Uncomment the following if you want avrdude's erase cycle counter.
212
# Note that this counter needs to be initialized first using -Yn,
213
# see avrdude manual.
214
#AVRDUDE_ERASE_COUNTER = -y
215
216
# Uncomment the following if you do /not/ wish a verification to be
217
# performed after programming the device.
218
AVRDUDE_NO_VERIFY = -V
219
220
# Increase verbosity level.  Please use this when submitting bug
221
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
222
# to submit bug reports.
223
#AVRDUDE_VERBOSE = -v -v
224
225
AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
226
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
227
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
228
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
229
230
231
232
#---------------- Debugging Options ----------------
233
234
# For simulavr only - target MCU frequency.
235
DEBUG_MFREQ = $(F_CPU)
236
237
# Set the DEBUG_UI to either gdb or insight.
238
# DEBUG_UI = gdb
239
DEBUG_UI = insight
240
241
# Set the debugging back-end to either avarice, simulavr.
242
DEBUG_BACKEND = avarice
243
#DEBUG_BACKEND = simulavr
244
245
# GDB Init Filename.
246
GDBINIT_FILE = __avr_gdbinit
247
248
# When using avarice settings for the JTAG
249
JTAG_DEV = /dev/com1
250
251
# Debugging port used to communicate between GDB / avarice / simulavr.
252
DEBUG_PORT = 4242
253
254
# Debugging host used to communicate between GDB / avarice / simulavr, normally
255
#     just set to localhost unless doing some sort of crazy debugging when
256
#     avarice is running on a different computer.
257
DEBUG_HOST = localhost
258
259
260
261
#============================================================================
262
263
264
# Define programs and commands.
265
SHELL = sh
266
CC = avr-gcc
267
OBJCOPY = avr-objcopy
268
OBJDUMP = avr-objdump
269
SIZE = avr-size
270
NM = avr-nm
271
AVRDUDE = avrdude
272
REMOVE = rm -f
273
COPY = cp
274
WINSHELL = cmd
275
276
277
# Define Messages
278
# English
279
MSG_ERRORS_NONE = Errors: none
280
MSG_BEGIN = -------- begin --------
281
MSG_END = --------  end  --------
282
MSG_SIZE_BEFORE = Size before:
283
MSG_SIZE_AFTER = Size after:
284
MSG_COFF = Converting to AVR COFF:
285
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
286
MSG_FLASH = Creating load file for Flash:
287
MSG_EEPROM = Creating load file for EEPROM:
288
MSG_EXTENDED_LISTING = Creating Extended Listing:
289
MSG_SYMBOL_TABLE = Creating Symbol Table:
290
MSG_LINKING = Linking:
291
MSG_COMPILING = Compiling:
292
MSG_ASSEMBLING = Assembling:
293
MSG_CLEANING = Cleaning project:
294
295
296
297
298
# Define all object files.
299
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
300
301
# Define all listing files.
302
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
303
304
305
# Compiler flags to generate dependency files.
306
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
307
308
309
# Combine all necessary flags and optional flags.
310
# Add target processor to flags.
311
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
312
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
313
314
315
316
317
318
# Default target.
319
all: begin gccversion sizebefore build sizeafter end
320
321
build: elf hex eep lss sym
322
323
elf: $(TARGET).elf
324
hex: $(TARGET).hex
325
eep: $(TARGET).eep
326
lss: $(TARGET).lss
327
sym: $(TARGET).sym
328
329
330
331
# Eye candy.
332
# AVR Studio 3.x does not check make's exit code but relies on
333
# the following magic strings to be generated by the compile job.
334
begin:
335
	@echo
336
	@echo $(MSG_BEGIN)
337
338
end:
339
	@echo $(MSG_END)
340
	@echo
341
342
343
# Display size of file.
344
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
345
ELFSIZE = $(SIZE) -A $(TARGET).elf
346
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
347
348
sizebefore:
349
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
350
	$(AVRMEM) 2>/dev/null; echo; fi
351
352
sizeafter:
353
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
354
	$(AVRMEM) 2>/dev/null; echo; fi
355
356
357
358
# Display compiler version information.
359
gccversion :
360
	@$(CC) --version
361
362
363
364
# Program the device.
365
program: $(TARGET).hex $(TARGET).eep
366
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
367
368
369
# Generate avr-gdb config/init file which does the following:
370
#     define the reset signal, load the target file, connect to target, and set
371
#     a breakpoint at main().
372
gdb-config:
373
	@$(REMOVE) $(GDBINIT_FILE)
374
	@echo define reset >> $(GDBINIT_FILE)
375
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
376
	@echo end >> $(GDBINIT_FILE)
377
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
378
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
379
ifeq ($(DEBUG_BACKEND),simulavr)
380
	@echo load  >> $(GDBINIT_FILE)
381
endif
382
	@echo break main >> $(GDBINIT_FILE)
383
384
debug: gdb-config $(TARGET).elf
385
ifeq ($(DEBUG_BACKEND), avarice)
386
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
387
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
388
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
389
	@$(WINSHELL) /c pause
390
391
else
392
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
393
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
394
endif
395
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
396
397
398
399
400
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
401
COFFCONVERT=$(OBJCOPY) --debugging \
402
--change-section-address .data-0x800000 \
403
--change-section-address .bss-0x800000 \
404
--change-section-address .noinit-0x800000 \
405
--change-section-address .eeprom-0x810000
406
407
408
coff: $(TARGET).elf
409
	@echo
410
	@echo $(MSG_COFF) $(TARGET).cof
411
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
412
413
414
extcoff: $(TARGET).elf
415
	@echo
416
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
417
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
418
419
420
421
# Create final output files (.hex, .eep) from ELF output file.
422
%.hex: %.elf
423
	@echo
424
	@echo $(MSG_FLASH) $@
425
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
426
427
%.eep: %.elf
428
	@echo
429
	@echo $(MSG_EEPROM) $@
430
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
431
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
432
433
# Create extended listing file from ELF output file.
434
%.lss: %.elf
435
	@echo
436
	@echo $(MSG_EXTENDED_LISTING) $@
437
	$(OBJDUMP) -h -S $< > $@
438
439
# Create a symbol table from ELF output file.
440
%.sym: %.elf
441
	@echo
442
	@echo $(MSG_SYMBOL_TABLE) $@
443
	$(NM) -n $< > $@
444
445
446
447
# Link: create ELF output file from object files.
448
.SECONDARY : $(TARGET).elf
449
.PRECIOUS : $(OBJ)
450
%.elf: $(OBJ)
451
	@echo
452
	@echo $(MSG_LINKING) $@
453
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
454
455
456
# Compile: create object files from C source files.
457
%.o : %.c
458
	@echo
459
	@echo $(MSG_COMPILING) $<
460
	$(CC) -c $(ALL_CFLAGS) $< -o $@
461
462
463
# Compile: create assembler files from C source files.
464
%.s : %.c
465
	$(CC) -S $(ALL_CFLAGS) $< -o $@
466
467
468
# Assemble: create object files from assembler source files.
469
%.o : %.S
470
	@echo
471
	@echo $(MSG_ASSEMBLING) $<
472
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
473
474
# Create preprocessed source for use in sending a bug report.
475
%.i : %.c
476
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
477
478
479
# Target: clean project.
480
clean: begin clean_list end
481
482
clean_list :
483
	@echo
484
	@echo $(MSG_CLEANING)
485
	$(REMOVE) $(TARGET).hex
486
	$(REMOVE) $(TARGET).eep
487
	$(REMOVE) $(TARGET).cof
488
	$(REMOVE) $(TARGET).elf
489
	$(REMOVE) $(TARGET).map
490
	$(REMOVE) $(TARGET).sym
491
	$(REMOVE) $(TARGET).lss
492
	$(REMOVE) $(OBJ)
493
	$(REMOVE) $(LST)
494
	$(REMOVE) $(SRC:.c=.s)
495
	$(REMOVE) $(SRC:.c=.d)
496
	$(REMOVE) .dep/*
497
498
499
500
# Include the dependency files.
501
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
502
503
504
# Listing of phony targets.
505
.PHONY : all begin finish end sizebefore sizeafter gccversion \
506
build elf hex eep lss sym coff extcoff \
507
clean clean_list program debug gdb-config