Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / libdragonfly / Doxyfile @ 1385

History | View | Annotate | Download (62.3 KB)

1
# Doxyfile 1.5.9
2

    
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project
5
#
6
# All text after a hash (#) is considered a comment and will be ignored
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ")
12

    
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16

    
17
# This tag specifies the encoding used for all characters in the config file 
18
# that follow. The default is UTF-8 which is also the encoding used for all 
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the 
20
# iconv built into libc) for the transcoding. See 
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22

    
23
DOXYFILE_ENCODING      = UTF-8
24

    
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
26
# by quotes) that should identify the project.
27

    
28
PROJECT_NAME           = libdragonfly
29

    
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
31
# This could be handy for archiving the generated documentation or 
32
# if some version control system is used.
33

    
34
PROJECT_NUMBER         = 1.0
35

    
36
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
37
# base path where the generated documentation will be put. 
38
# If a relative path is entered, it will be relative to the location 
39
# where doxygen was started. If left blank the current directory will be used.
40

    
41
OUTPUT_DIRECTORY       = docs
42

    
43
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
44
# 4096 sub-directories (in 2 levels) under the output directory of each output 
45
# format and will distribute the generated files over these directories. 
46
# Enabling this option can be useful when feeding doxygen a huge amount of 
47
# source files, where putting all generated files in the same directory would 
48
# otherwise cause performance problems for the file system.
49

    
50
CREATE_SUBDIRS         = NO
51

    
52
# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
53
# documentation generated by doxygen is written. Doxygen will use this 
54
# information to generate all constant output in the proper language. 
55
# The default language is English, other supported languages are: 
56
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
57
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, 
58
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English 
59
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, 
60
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, 
61
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62

    
63
OUTPUT_LANGUAGE        = English
64

    
65
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
66
# include brief member descriptions after the members that are listed in 
67
# the file and class documentation (similar to JavaDoc). 
68
# Set to NO to disable this.
69

    
70
BRIEF_MEMBER_DESC      = YES
71

    
72
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
73
# the brief description of a member or function before the detailed description. 
74
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
75
# brief descriptions will be completely suppressed.
76

    
77
REPEAT_BRIEF           = YES
78

    
79
# This tag implements a quasi-intelligent brief description abbreviator 
80
# that is used to form the text in various listings. Each string 
81
# in this list, if found as the leading text of the brief description, will be 
82
# stripped from the text and the result after processing the whole list, is 
83
# used as the annotated text. Otherwise, the brief description is used as-is. 
84
# If left blank, the following values are used ("$name" is automatically 
85
# replaced with the name of the entity): "The $name class" "The $name widget" 
86
# "The $name file" "is" "provides" "specifies" "contains" 
87
# "represents" "a" "an" "the"
88

    
89
ABBREVIATE_BRIEF       = 
90

    
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
92
# Doxygen will generate a detailed section even if there is only a brief 
93
# description.
94

    
95
ALWAYS_DETAILED_SEC    = NO
96

    
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
98
# inherited members of a class in the documentation of that class as if those 
99
# members were ordinary class members. Constructors, destructors and assignment 
100
# operators of the base classes will not be shown.
101

    
102
INLINE_INHERITED_MEMB  = NO
103

    
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
105
# path before files name in the file list and in the header files. If set 
106
# to NO the shortest path that makes the file name unique will be used.
107

    
108
FULL_PATH_NAMES        = YES
109

    
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
111
# can be used to strip a user-defined part of the path. Stripping is 
112
# only done if one of the specified strings matches the left-hand part of 
113
# the path. The tag can be used to show relative paths in the file list. 
114
# If left blank the directory from which doxygen is run is used as the 
115
# path to strip.
116

    
117
STRIP_FROM_PATH        = 
118

    
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
120
# the path mentioned in the documentation of a class, which tells 
121
# the reader which header file to include in order to use a class. 
122
# If left blank only the name of the header file containing the class 
123
# definition is used. Otherwise one should specify the include paths that 
124
# are normally passed to the compiler using the -I flag.
125

    
126
STRIP_FROM_INC_PATH    = 
127

    
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
129
# (but less readable) file names. This can be useful is your file systems 
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
131

    
132
SHORT_NAMES            = NO
133

    
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
135
# will interpret the first line (until the first dot) of a JavaDoc-style 
136
# comment as the brief description. If set to NO, the JavaDoc 
137
# comments will behave just like regular Qt-style comments 
138
# (thus requiring an explicit @brief command for a brief description.)
139

    
140
JAVADOC_AUTOBRIEF      = NO
141

    
142
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
143
# interpret the first line (until the first dot) of a Qt-style 
144
# comment as the brief description. If set to NO, the comments 
145
# will behave just like regular Qt-style comments (thus requiring 
146
# an explicit \brief command for a brief description.)
147

    
148
QT_AUTOBRIEF           = NO
149

    
150
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
151
# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
152
# comments) as a brief description. This used to be the default behaviour. 
153
# The new default is to treat a multi-line C++ comment block as a detailed 
154
# description. Set this tag to YES if you prefer the old behaviour instead.
155

    
156
MULTILINE_CPP_IS_BRIEF = NO
157

    
158
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
159
# member inherits the documentation from any documented member that it 
160
# re-implements.
161

    
162
INHERIT_DOCS           = YES
163

    
164
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
165
# a new page for each member. If set to NO, the documentation of a member will 
166
# be part of the file/class/namespace that contains it.
167

    
168
SEPARATE_MEMBER_PAGES  = NO
169

    
170
# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
171
# Doxygen uses this value to replace tabs by spaces in code fragments.
172

    
173
TAB_SIZE               = 8
174

    
175
# This tag can be used to specify a number of aliases that acts 
176
# as commands in the documentation. An alias has the form "name=value". 
177
# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
178
# put the command \sideeffect (or @sideeffect) in the documentation, which 
179
# will result in a user-defined paragraph with heading "Side Effects:". 
180
# You can put \n's in the value part of an alias to insert newlines.
181

    
182
ALIASES                = 
183

    
184
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
185
# sources only. Doxygen will then generate output that is more tailored for C. 
186
# For instance, some of the names that are used will be different. The list 
187
# of all members will be omitted, etc.
188

    
189
OPTIMIZE_OUTPUT_FOR_C  = YES
190

    
191
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
192
# sources only. Doxygen will then generate output that is more tailored for 
193
# Java. For instance, namespaces will be presented as packages, qualified 
194
# scopes will look different, etc.
195

    
196
OPTIMIZE_OUTPUT_JAVA   = NO
197

    
198
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
199
# sources only. Doxygen will then generate output that is more tailored for 
200
# Fortran.
201

    
202
OPTIMIZE_FOR_FORTRAN   = NO
203

    
204
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
205
# sources. Doxygen will then generate output that is tailored for 
206
# VHDL.
207

    
208
OPTIMIZE_OUTPUT_VHDL   = NO
209

    
210
# Doxygen selects the parser to use depending on the extension of the files it parses. 
211
# With this tag you can assign which parser to use for a given extension. 
212
# Doxygen has a built-in mapping, but you can override or extend it using this tag. 
213
# The format is ext=language, where ext is a file extension, and language is one of 
214
# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, 
215
# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat 
216
# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), 
217
# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
218

    
219
EXTENSION_MAPPING      = 
220

    
221
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
222
# to include (a tag file for) the STL sources as input, then you should 
223
# set this tag to YES in order to let doxygen match functions declarations and 
224
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
225
# func(std::string) {}). This also make the inheritance and collaboration 
226
# diagrams that involve STL classes more complete and accurate.
227

    
228
BUILTIN_STL_SUPPORT    = NO
229

    
230
# If you use Microsoft's C++/CLI language, you should set this option to YES to 
231
# enable parsing support.
232

    
233
CPP_CLI_SUPPORT        = NO
234

    
235
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
236
# Doxygen will parse them like normal C++ but will assume all classes use public 
237
# instead of private inheritance when no explicit protection keyword is present.
238

    
239
SIP_SUPPORT            = NO
240

    
241
# For Microsoft's IDL there are propget and propput attributes to indicate getter 
242
# and setter methods for a property. Setting this option to YES (the default) 
243
# will make doxygen to replace the get and set methods by a property in the 
244
# documentation. This will only work if the methods are indeed getting or 
245
# setting a simple type. If this is not the case, or you want to show the 
246
# methods anyway, you should set this option to NO.
247

    
248
IDL_PROPERTY_SUPPORT   = YES
249

    
250
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
251
# tag is set to YES, then doxygen will reuse the documentation of the first 
252
# member in the group (if any) for the other members of the group. By default 
253
# all members of a group must be documented explicitly.
254

    
255
DISTRIBUTE_GROUP_DOC   = NO
256

    
257
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
258
# the same type (for instance a group of public functions) to be put as a 
259
# subgroup of that type (e.g. under the Public Functions section). Set it to 
260
# NO to prevent subgrouping. Alternatively, this can be done per class using 
261
# the \nosubgrouping command.
262

    
263
SUBGROUPING            = YES
264

    
265
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
266
# is documented as struct, union, or enum with the name of the typedef. So 
267
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
268
# with name TypeT. When disabled the typedef will appear as a member of a file, 
269
# namespace, or class. And the struct will be named TypeS. This can typically 
270
# be useful for C code in case the coding convention dictates that all compound 
271
# types are typedef'ed and only the typedef is referenced, never the tag name.
272

    
273
TYPEDEF_HIDES_STRUCT   = NO
274

    
275
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 
276
# determine which symbols to keep in memory and which to flush to disk. 
277
# When the cache is full, less often used symbols will be written to disk. 
278
# For small to medium size projects (<1000 input files) the default value is 
279
# probably good enough. For larger projects a too small cache size can cause 
280
# doxygen to be busy swapping symbols to and from disk most of the time 
281
# causing a significant performance penality. 
282
# If the system has enough physical memory increasing the cache will improve the 
283
# performance by keeping more symbols in memory. Note that the value works on 
284
# a logarithmic scale so increasing the size by one will rougly double the 
285
# memory usage. The cache size is given by this formula: 
286
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 
287
# corresponding to a cache size of 2^16 = 65536 symbols
288

    
289
SYMBOL_CACHE_SIZE      = 0
290

    
291
#---------------------------------------------------------------------------
292
# Build related configuration options
293
#---------------------------------------------------------------------------
294

    
295
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
296
# documentation are documented, even if no documentation was available. 
297
# Private class members and static file members will be hidden unless 
298
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
299

    
300
EXTRACT_ALL            = NO
301

    
302
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
303
# will be included in the documentation.
304

    
305
EXTRACT_PRIVATE        = NO
306

    
307
# If the EXTRACT_STATIC tag is set to YES all static members of a file 
308
# will be included in the documentation.
309

    
310
EXTRACT_STATIC         = NO
311

    
312
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
313
# defined locally in source files will be included in the documentation. 
314
# If set to NO only classes defined in header files are included.
315

    
316
EXTRACT_LOCAL_CLASSES  = YES
317

    
318
# This flag is only useful for Objective-C code. When set to YES local 
319
# methods, which are defined in the implementation section but not in 
320
# the interface are included in the documentation. 
321
# If set to NO (the default) only methods in the interface are included.
322

    
323
EXTRACT_LOCAL_METHODS  = NO
324

    
325
# If this flag is set to YES, the members of anonymous namespaces will be 
326
# extracted and appear in the documentation as a namespace called 
327
# 'anonymous_namespace{file}', where file will be replaced with the base 
328
# name of the file that contains the anonymous namespace. By default 
329
# anonymous namespace are hidden.
330

    
331
EXTRACT_ANON_NSPACES   = NO
332

    
333
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
334
# undocumented members of documented classes, files or namespaces. 
335
# If set to NO (the default) these members will be included in the 
336
# various overviews, but no documentation section is generated. 
337
# This option has no effect if EXTRACT_ALL is enabled.
338

    
339
HIDE_UNDOC_MEMBERS     = NO
340

    
341
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
342
# undocumented classes that are normally visible in the class hierarchy. 
343
# If set to NO (the default) these classes will be included in the various 
344
# overviews. This option has no effect if EXTRACT_ALL is enabled.
345

    
346
HIDE_UNDOC_CLASSES     = NO
347

    
348
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
349
# friend (class|struct|union) declarations. 
350
# If set to NO (the default) these declarations will be included in the 
351
# documentation.
352

    
353
HIDE_FRIEND_COMPOUNDS  = NO
354

    
355
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
356
# documentation blocks found inside the body of a function. 
357
# If set to NO (the default) these blocks will be appended to the 
358
# function's detailed documentation block.
359

    
360
HIDE_IN_BODY_DOCS      = NO
361

    
362
# The INTERNAL_DOCS tag determines if documentation 
363
# that is typed after a \internal command is included. If the tag is set 
364
# to NO (the default) then the documentation will be excluded. 
365
# Set it to YES to include the internal documentation.
366

    
367
INTERNAL_DOCS          = NO
368

    
369
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
370
# file names in lower-case letters. If set to YES upper-case letters are also 
371
# allowed. This is useful if you have classes or files whose names only differ 
372
# in case and if your file system supports case sensitive file names. Windows 
373
# and Mac users are advised to set this option to NO.
374

    
375
CASE_SENSE_NAMES       = YES
376

    
377
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
378
# will show members with their full class and namespace scopes in the 
379
# documentation. If set to YES the scope will be hidden.
380

    
381
HIDE_SCOPE_NAMES       = NO
382

    
383
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
384
# will put a list of the files that are included by a file in the documentation 
385
# of that file.
386

    
387
SHOW_INCLUDE_FILES     = YES
388

    
389
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
390
# is inserted in the documentation for inline members.
391

    
392
INLINE_INFO            = YES
393

    
394
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
395
# will sort the (detailed) documentation of file and class members 
396
# alphabetically by member name. If set to NO the members will appear in 
397
# declaration order.
398

    
399
SORT_MEMBER_DOCS       = YES
400

    
401
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
402
# brief documentation of file, namespace and class members alphabetically 
403
# by member name. If set to NO (the default) the members will appear in 
404
# declaration order.
405

    
406
SORT_BRIEF_DOCS        = NO
407

    
408
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
409
# hierarchy of group names into alphabetical order. If set to NO (the default) 
410
# the group names will appear in their defined order.
411

    
412
SORT_GROUP_NAMES       = NO
413

    
414
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
415
# sorted by fully-qualified names, including namespaces. If set to 
416
# NO (the default), the class list will be sorted only by class name, 
417
# not including the namespace part. 
418
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 
419
# Note: This option applies only to the class list, not to the 
420
# alphabetical list.
421

    
422
SORT_BY_SCOPE_NAME     = NO
423

    
424
# The GENERATE_TODOLIST tag can be used to enable (YES) or 
425
# disable (NO) the todo list. This list is created by putting \todo 
426
# commands in the documentation.
427

    
428
GENERATE_TODOLIST      = YES
429

    
430
# The GENERATE_TESTLIST tag can be used to enable (YES) or 
431
# disable (NO) the test list. This list is created by putting \test 
432
# commands in the documentation.
433

    
434
GENERATE_TESTLIST      = YES
435

    
436
# The GENERATE_BUGLIST tag can be used to enable (YES) or 
437
# disable (NO) the bug list. This list is created by putting \bug 
438
# commands in the documentation.
439

    
440
GENERATE_BUGLIST       = YES
441

    
442
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
443
# disable (NO) the deprecated list. This list is created by putting 
444
# \deprecated commands in the documentation.
445

    
446
GENERATE_DEPRECATEDLIST= YES
447

    
448
# The ENABLED_SECTIONS tag can be used to enable conditional 
449
# documentation sections, marked by \if sectionname ... \endif.
450

    
451
ENABLED_SECTIONS       = 
452

    
453
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
454
# the initial value of a variable or define consists of for it to appear in 
455
# the documentation. If the initializer consists of more lines than specified 
456
# here it will be hidden. Use a value of 0 to hide initializers completely. 
457
# The appearance of the initializer of individual variables and defines in the 
458
# documentation can be controlled using \showinitializer or \hideinitializer 
459
# command in the documentation regardless of this setting.
460

    
461
MAX_INITIALIZER_LINES  = 30
462

    
463
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
464
# at the bottom of the documentation of classes and structs. If set to YES the 
465
# list will mention the files that were used to generate the documentation.
466

    
467
SHOW_USED_FILES        = YES
468

    
469
# If the sources in your project are distributed over multiple directories 
470
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
471
# in the documentation. The default is NO.
472

    
473
SHOW_DIRECTORIES       = NO
474

    
475
# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 
476
# This will remove the Files entry from the Quick Index and from the 
477
# Folder Tree View (if specified). The default is YES.
478

    
479
SHOW_FILES             = YES
480

    
481
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 
482
# Namespaces page. 
483
# This will remove the Namespaces entry from the Quick Index 
484
# and from the Folder Tree View (if specified). The default is YES.
485

    
486
SHOW_NAMESPACES        = YES
487

    
488
# The FILE_VERSION_FILTER tag can be used to specify a program or script that 
489
# doxygen should invoke to get the current version for each file (typically from 
490
# the version control system). Doxygen will invoke the program by executing (via 
491
# popen()) the command <command> <input-file>, where <command> is the value of 
492
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
493
# provided by doxygen. Whatever the program writes to standard output 
494
# is used as the file version. See the manual for examples.
495

    
496
FILE_VERSION_FILTER    = 
497

    
498
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 
499
# doxygen. The layout file controls the global structure of the generated output files 
500
# in an output format independent way. The create the layout file that represents 
501
# doxygen's defaults, run doxygen with the -l option. You can optionally specify a 
502
# file name after the option, if omitted DoxygenLayout.xml will be used as the name 
503
# of the layout file.
504

    
505
LAYOUT_FILE            = 
506

    
507
#---------------------------------------------------------------------------
508
# configuration options related to warning and progress messages
509
#---------------------------------------------------------------------------
510

    
511
# The QUIET tag can be used to turn on/off the messages that are generated 
512
# by doxygen. Possible values are YES and NO. If left blank NO is used.
513

    
514
QUIET                  = NO
515

    
516
# The WARNINGS tag can be used to turn on/off the warning messages that are 
517
# generated by doxygen. Possible values are YES and NO. If left blank 
518
# NO is used.
519

    
520
WARNINGS               = YES
521

    
522
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
523
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
524
# automatically be disabled.
525

    
526
WARN_IF_UNDOCUMENTED   = YES
527

    
528
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
529
# potential errors in the documentation, such as not documenting some 
530
# parameters in a documented function, or documenting parameters that 
531
# don't exist or using markup commands wrongly.
532

    
533
WARN_IF_DOC_ERROR      = YES
534

    
535
# This WARN_NO_PARAMDOC option can be abled to get warnings for 
536
# functions that are documented, but have no documentation for their parameters 
537
# or return value. If set to NO (the default) doxygen will only warn about 
538
# wrong or incomplete parameter documentation, but not about the absence of 
539
# documentation.
540

    
541
WARN_NO_PARAMDOC       = NO
542

    
543
# The WARN_FORMAT tag determines the format of the warning messages that 
544
# doxygen can produce. The string should contain the $file, $line, and $text 
545
# tags, which will be replaced by the file and line number from which the 
546
# warning originated and the warning text. Optionally the format may contain 
547
# $version, which will be replaced by the version of the file (if it could 
548
# be obtained via FILE_VERSION_FILTER)
549

    
550
WARN_FORMAT            = "$file:$line: $text"
551

    
552
# The WARN_LOGFILE tag can be used to specify a file to which warning 
553
# and error messages should be written. If left blank the output is written 
554
# to stderr.
555

    
556
WARN_LOGFILE           = 
557

    
558
#---------------------------------------------------------------------------
559
# configuration options related to the input files
560
#---------------------------------------------------------------------------
561

    
562
# The INPUT tag can be used to specify the files and/or directories that contain 
563
# documented source files. You may enter file names like "myfile.cpp" or 
564
# directories like "/usr/src/myproject". Separate the files or directories 
565
# with spaces.
566

    
567
INPUT                  = 
568

    
569
# This tag can be used to specify the character encoding of the source files 
570
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
571
# also the default input encoding. Doxygen uses libiconv (or the iconv built 
572
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
573
# the list of possible encodings.
574

    
575
INPUT_ENCODING         = UTF-8
576

    
577
# If the value of the INPUT tag contains directories, you can use the 
578
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
579
# and *.h) to filter out the source-files in the directories. If left 
580
# blank the following patterns are tested: 
581
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
582
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
583

    
584
FILE_PATTERNS          = 
585

    
586
# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
587
# should be searched for input files as well. Possible values are YES and NO. 
588
# If left blank NO is used.
589

    
590
RECURSIVE              = NO
591

    
592
# The EXCLUDE tag can be used to specify files and/or directories that should 
593
# excluded from the INPUT source files. This way you can easily exclude a 
594
# subdirectory from a directory tree whose root is specified with the INPUT tag.
595

    
596
EXCLUDE                = 
597

    
598
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
599
# directories that are symbolic links (a Unix filesystem feature) are excluded 
600
# from the input.
601

    
602
EXCLUDE_SYMLINKS       = NO
603

    
604
# If the value of the INPUT tag contains directories, you can use the 
605
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
606
# certain files from those directories. Note that the wildcards are matched 
607
# against the file with absolute path, so to exclude all test directories 
608
# for example use the pattern */test/*
609

    
610
EXCLUDE_PATTERNS       = 
611

    
612
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
613
# (namespaces, classes, functions, etc.) that should be excluded from the 
614
# output. The symbol name can be a fully qualified name, a word, or if the 
615
# wildcard * is used, a substring. Examples: ANamespace, AClass, 
616
# AClass::ANamespace, ANamespace::*Test
617

    
618
EXCLUDE_SYMBOLS        = 
619

    
620
# The EXAMPLE_PATH tag can be used to specify one or more files or 
621
# directories that contain example code fragments that are included (see 
622
# the \include command).
623

    
624
EXAMPLE_PATH           = 
625

    
626
# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
627
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
628
# and *.h) to filter out the source-files in the directories. If left 
629
# blank all files are included.
630

    
631
EXAMPLE_PATTERNS       = 
632

    
633
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
634
# searched for input files to be used with the \include or \dontinclude 
635
# commands irrespective of the value of the RECURSIVE tag. 
636
# Possible values are YES and NO. If left blank NO is used.
637

    
638
EXAMPLE_RECURSIVE      = NO
639

    
640
# The IMAGE_PATH tag can be used to specify one or more files or 
641
# directories that contain image that are included in the documentation (see 
642
# the \image command).
643

    
644
IMAGE_PATH             = 
645

    
646
# The INPUT_FILTER tag can be used to specify a program that doxygen should 
647
# invoke to filter for each input file. Doxygen will invoke the filter program 
648
# by executing (via popen()) the command <filter> <input-file>, where <filter> 
649
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
650
# input file. Doxygen will then use the output that the filter program writes 
651
# to standard output. 
652
# If FILTER_PATTERNS is specified, this tag will be 
653
# ignored.
654

    
655
INPUT_FILTER           = 
656

    
657
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
658
# basis. 
659
# Doxygen will compare the file name with each pattern and apply the 
660
# filter if there is a match. 
661
# The filters are a list of the form: 
662
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
663
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
664
# is applied to all files.
665

    
666
FILTER_PATTERNS        = 
667

    
668
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
669
# INPUT_FILTER) will be used to filter the input files when producing source 
670
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
671

    
672
FILTER_SOURCE_FILES    = NO
673

    
674
#---------------------------------------------------------------------------
675
# configuration options related to source browsing
676
#---------------------------------------------------------------------------
677

    
678
# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
679
# be generated. Documented entities will be cross-referenced with these sources. 
680
# Note: To get rid of all source code in the generated output, make sure also 
681
# VERBATIM_HEADERS is set to NO.
682

    
683
SOURCE_BROWSER         = NO
684

    
685
# Setting the INLINE_SOURCES tag to YES will include the body 
686
# of functions and classes directly in the documentation.
687

    
688
INLINE_SOURCES         = NO
689

    
690
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
691
# doxygen to hide any special comment blocks from generated source code 
692
# fragments. Normal C and C++ comments will always remain visible.
693

    
694
STRIP_CODE_COMMENTS    = YES
695

    
696
# If the REFERENCED_BY_RELATION tag is set to YES 
697
# then for each documented function all documented 
698
# functions referencing it will be listed.
699

    
700
REFERENCED_BY_RELATION = YES
701

    
702
# If the REFERENCES_RELATION tag is set to YES 
703
# then for each documented function all documented entities 
704
# called/used by that function will be listed.
705

    
706
REFERENCES_RELATION    = YES
707

    
708
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 
709
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 
710
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 
711
# link to the source code. 
712
# Otherwise they will link to the documentation.
713

    
714
REFERENCES_LINK_SOURCE = YES
715

    
716
# If the USE_HTAGS tag is set to YES then the references to source code 
717
# will point to the HTML generated by the htags(1) tool instead of doxygen 
718
# built-in source browser. The htags tool is part of GNU's global source 
719
# tagging system (see http://www.gnu.org/software/global/global.html). You 
720
# will need version 4.8.6 or higher.
721

    
722
USE_HTAGS              = NO
723

    
724
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
725
# will generate a verbatim copy of the header file for each class for 
726
# which an include is specified. Set to NO to disable this.
727

    
728
VERBATIM_HEADERS       = YES
729

    
730
#---------------------------------------------------------------------------
731
# configuration options related to the alphabetical class index
732
#---------------------------------------------------------------------------
733

    
734
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
735
# of all compounds will be generated. Enable this if the project 
736
# contains a lot of classes, structs, unions or interfaces.
737

    
738
ALPHABETICAL_INDEX     = NO
739

    
740
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
741
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
742
# in which this list will be split (can be a number in the range [1..20])
743

    
744
COLS_IN_ALPHA_INDEX    = 5
745

    
746
# In case all classes in a project start with a common prefix, all 
747
# classes will be put under the same header in the alphabetical index. 
748
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
749
# should be ignored while generating the index headers.
750

    
751
IGNORE_PREFIX          = 
752

    
753
#---------------------------------------------------------------------------
754
# configuration options related to the HTML output
755
#---------------------------------------------------------------------------
756

    
757
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
758
# generate HTML output.
759

    
760
GENERATE_HTML          = YES
761

    
762
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
763
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
764
# put in front of it. If left blank `html' will be used as the default path.
765

    
766
HTML_OUTPUT            = html
767

    
768
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
769
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
770
# doxygen will generate files with .html extension.
771

    
772
HTML_FILE_EXTENSION    = .html
773

    
774
# The HTML_HEADER tag can be used to specify a personal HTML header for 
775
# each generated HTML page. If it is left blank doxygen will generate a 
776
# standard header.
777

    
778
HTML_HEADER            = 
779

    
780
# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
781
# each generated HTML page. If it is left blank doxygen will generate a 
782
# standard footer.
783

    
784
HTML_FOOTER            = 
785

    
786
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
787
# style sheet that is used by each HTML page. It can be used to 
788
# fine-tune the look of the HTML output. If the tag is left blank doxygen 
789
# will generate a default style sheet. Note that doxygen will try to copy 
790
# the style sheet file to the HTML output directory, so don't put your own 
791
# stylesheet in the HTML output directory as well, or it will be erased!
792

    
793
HTML_STYLESHEET        = 
794

    
795
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
796
# files or namespaces will be aligned in HTML using tables. If set to 
797
# NO a bullet list will be used.
798

    
799
HTML_ALIGN_MEMBERS     = YES
800

    
801
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
802
# documentation will contain sections that can be hidden and shown after the 
803
# page has loaded. For this to work a browser that supports 
804
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
805
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
806

    
807
HTML_DYNAMIC_SECTIONS  = NO
808

    
809
# If the GENERATE_DOCSET tag is set to YES, additional index files 
810
# will be generated that can be used as input for Apple's Xcode 3 
811
# integrated development environment, introduced with OSX 10.5 (Leopard). 
812
# To create a documentation set, doxygen will generate a Makefile in the 
813
# HTML output directory. Running make will produce the docset in that 
814
# directory and running "make install" will install the docset in 
815
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
816
# it at startup. 
817
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
818

    
819
GENERATE_DOCSET        = NO
820

    
821
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
822
# feed. A documentation feed provides an umbrella under which multiple 
823
# documentation sets from a single provider (such as a company or product suite) 
824
# can be grouped.
825

    
826
DOCSET_FEEDNAME        = "Doxygen generated docs"
827

    
828
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
829
# should uniquely identify the documentation set bundle. This should be a 
830
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
831
# will append .docset to the name.
832

    
833
DOCSET_BUNDLE_ID       = org.doxygen.Project
834

    
835
# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
836
# will be generated that can be used as input for tools like the 
837
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
838
# of the generated HTML documentation.
839

    
840
GENERATE_HTMLHELP      = NO
841

    
842
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
843
# be used to specify the file name of the resulting .chm file. You 
844
# can add a path in front of the file if the result should not be 
845
# written to the html output directory.
846

    
847
CHM_FILE               = 
848

    
849
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
850
# be used to specify the location (absolute path including file name) of 
851
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
852
# the HTML help compiler on the generated index.hhp.
853

    
854
HHC_LOCATION           = 
855

    
856
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
857
# controls if a separate .chi index file is generated (YES) or that 
858
# it should be included in the master .chm file (NO).
859

    
860
GENERATE_CHI           = NO
861

    
862
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 
863
# is used to encode HtmlHelp index (hhk), content (hhc) and project file 
864
# content.
865

    
866
CHM_INDEX_ENCODING     = 
867

    
868
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
869
# controls whether a binary table of contents is generated (YES) or a 
870
# normal table of contents (NO) in the .chm file.
871

    
872
BINARY_TOC             = NO
873

    
874
# The TOC_EXPAND flag can be set to YES to add extra items for group members 
875
# to the contents of the HTML help documentation and to the tree view.
876

    
877
TOC_EXPAND             = NO
878

    
879
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 
880
# are set, an additional index file will be generated that can be used as input for 
881
# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 
882
# HTML documentation.
883

    
884
GENERATE_QHP           = NO
885

    
886
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 
887
# be used to specify the file name of the resulting .qch file. 
888
# The path specified is relative to the HTML output folder.
889

    
890
QCH_FILE               = 
891

    
892
# The QHP_NAMESPACE tag specifies the namespace to use when generating 
893
# Qt Help Project output. For more information please see 
894
# http://doc.trolltech.com/qthelpproject.html#namespace
895

    
896
QHP_NAMESPACE          = 
897

    
898
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 
899
# Qt Help Project output. For more information please see 
900
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
901

    
902
QHP_VIRTUAL_FOLDER     = doc
903

    
904
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. 
905
# For more information please see 
906
# http://doc.trolltech.com/qthelpproject.html#custom-filters
907

    
908
QHP_CUST_FILTER_NAME   = 
909

    
910
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see 
911
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
912

    
913
QHP_CUST_FILTER_ATTRS  = 
914

    
915
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's 
916
# filter section matches. 
917
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
918

    
919
QHP_SECT_FILTER_ATTRS  = 
920

    
921
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 
922
# be used to specify the location of Qt's qhelpgenerator. 
923
# If non-empty doxygen will try to run qhelpgenerator on the generated 
924
# .qhp file.
925

    
926
QHG_LOCATION           = 
927

    
928
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
929
# top of each HTML page. The value NO (the default) enables the index and 
930
# the value YES disables it.
931

    
932
DISABLE_INDEX          = NO
933

    
934
# This tag can be used to set the number of enum values (range [1..20]) 
935
# that doxygen will group on one line in the generated HTML documentation.
936

    
937
ENUM_VALUES_PER_LINE   = 4
938

    
939
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 
940
# structure should be generated to display hierarchical information. 
941
# If the tag value is set to FRAME, a side panel will be generated 
942
# containing a tree-like index structure (just like the one that 
943
# is generated for HTML Help). For this to work a browser that supports 
944
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
945
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
946
# probably better off using the HTML help feature. Other possible values 
947
# for this tag are: HIERARCHIES, which will generate the Groups, Directories, 
948
# and Class Hierarchy pages using a tree view instead of an ordered list; 
949
# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 
950
# disables this behavior completely. For backwards compatibility with previous 
951
# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 
952
# respectively.
953

    
954
GENERATE_TREEVIEW      = NO
955

    
956
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
957
# used to set the initial width (in pixels) of the frame in which the tree 
958
# is shown.
959

    
960
TREEVIEW_WIDTH         = 250
961

    
962
# Use this tag to change the font size of Latex formulas included 
963
# as images in the HTML documentation. The default is 10. Note that 
964
# when you change the font size after a successful doxygen run you need 
965
# to manually remove any form_*.png images from the HTML output directory 
966
# to force them to be regenerated.
967

    
968
FORMULA_FONTSIZE       = 10
969

    
970
#---------------------------------------------------------------------------
971
# configuration options related to the LaTeX output
972
#---------------------------------------------------------------------------
973

    
974
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
975
# generate Latex output.
976

    
977
GENERATE_LATEX         = NO
978

    
979
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
980
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
981
# put in front of it. If left blank `latex' will be used as the default path.
982

    
983
LATEX_OUTPUT           = latex
984

    
985
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
986
# invoked. If left blank `latex' will be used as the default command name.
987

    
988
LATEX_CMD_NAME         = latex
989

    
990
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
991
# generate index for LaTeX. If left blank `makeindex' will be used as the 
992
# default command name.
993

    
994
MAKEINDEX_CMD_NAME     = makeindex
995

    
996
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
997
# LaTeX documents. This may be useful for small projects and may help to 
998
# save some trees in general.
999

    
1000
COMPACT_LATEX          = NO
1001

    
1002
# The PAPER_TYPE tag can be used to set the paper type that is used 
1003
# by the printer. Possible values are: a4, a4wide, letter, legal and 
1004
# executive. If left blank a4wide will be used.
1005

    
1006
PAPER_TYPE             = a4wide
1007

    
1008
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
1009
# packages that should be included in the LaTeX output.
1010

    
1011
EXTRA_PACKAGES         = 
1012

    
1013
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
1014
# the generated latex document. The header should contain everything until 
1015
# the first chapter. If it is left blank doxygen will generate a 
1016
# standard header. Notice: only use this tag if you know what you are doing!
1017

    
1018
LATEX_HEADER           = 
1019

    
1020
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
1021
# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
1022
# contain links (just like the HTML output) instead of page references 
1023
# This makes the output suitable for online browsing using a pdf viewer.
1024

    
1025
PDF_HYPERLINKS         = NO
1026

    
1027
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
1028
# plain latex in the generated Makefile. Set this option to YES to get a 
1029
# higher quality PDF documentation.
1030

    
1031
USE_PDFLATEX           = NO
1032

    
1033
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
1034
# command to the generated LaTeX files. This will instruct LaTeX to keep 
1035
# running if errors occur, instead of asking the user for help. 
1036
# This option is also used when generating formulas in HTML.
1037

    
1038
LATEX_BATCHMODE        = NO
1039

    
1040
# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
1041
# include the index chapters (such as File Index, Compound Index, etc.) 
1042
# in the output.
1043

    
1044
LATEX_HIDE_INDICES     = NO
1045

    
1046
# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1047

    
1048
LATEX_SOURCE_CODE      = NO
1049

    
1050
#---------------------------------------------------------------------------
1051
# configuration options related to the RTF output
1052
#---------------------------------------------------------------------------
1053

    
1054
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
1055
# The RTF output is optimized for Word 97 and may not look very pretty with 
1056
# other RTF readers or editors.
1057

    
1058
GENERATE_RTF           = NO
1059

    
1060
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
1061
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
1062
# put in front of it. If left blank `rtf' will be used as the default path.
1063

    
1064
RTF_OUTPUT             = rtf
1065

    
1066
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
1067
# RTF documents. This may be useful for small projects and may help to 
1068
# save some trees in general.
1069

    
1070
COMPACT_RTF            = NO
1071

    
1072
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
1073
# will contain hyperlink fields. The RTF file will 
1074
# contain links (just like the HTML output) instead of page references. 
1075
# This makes the output suitable for online browsing using WORD or other 
1076
# programs which support those fields. 
1077
# Note: wordpad (write) and others do not support links.
1078

    
1079
RTF_HYPERLINKS         = NO
1080

    
1081
# Load stylesheet definitions from file. Syntax is similar to doxygen's 
1082
# config file, i.e. a series of assignments. You only have to provide 
1083
# replacements, missing definitions are set to their default value.
1084

    
1085
RTF_STYLESHEET_FILE    = 
1086

    
1087
# Set optional variables used in the generation of an rtf document. 
1088
# Syntax is similar to doxygen's config file.
1089

    
1090
RTF_EXTENSIONS_FILE    = 
1091

    
1092
#---------------------------------------------------------------------------
1093
# configuration options related to the man page output
1094
#---------------------------------------------------------------------------
1095

    
1096
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
1097
# generate man pages
1098

    
1099
GENERATE_MAN           = NO
1100

    
1101
# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
1102
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
1103
# put in front of it. If left blank `man' will be used as the default path.
1104

    
1105
MAN_OUTPUT             = man
1106

    
1107
# The MAN_EXTENSION tag determines the extension that is added to 
1108
# the generated man pages (default is the subroutine's section .3)
1109

    
1110
MAN_EXTENSION          = .3
1111

    
1112
# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
1113
# then it will generate one additional man file for each entity 
1114
# documented in the real man page(s). These additional files 
1115
# only source the real man page, but without them the man command 
1116
# would be unable to find the correct page. The default is NO.
1117

    
1118
MAN_LINKS              = NO
1119

    
1120
#---------------------------------------------------------------------------
1121
# configuration options related to the XML output
1122
#---------------------------------------------------------------------------
1123

    
1124
# If the GENERATE_XML tag is set to YES Doxygen will 
1125
# generate an XML file that captures the structure of 
1126
# the code including all documentation.
1127

    
1128
GENERATE_XML           = NO
1129

    
1130
# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
1131
# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
1132
# put in front of it. If left blank `xml' will be used as the default path.
1133

    
1134
XML_OUTPUT             = xml
1135

    
1136
# The XML_SCHEMA tag can be used to specify an XML schema, 
1137
# which can be used by a validating XML parser to check the 
1138
# syntax of the XML files.
1139

    
1140
XML_SCHEMA             = 
1141

    
1142
# The XML_DTD tag can be used to specify an XML DTD, 
1143
# which can be used by a validating XML parser to check the 
1144
# syntax of the XML files.
1145

    
1146
XML_DTD                = 
1147

    
1148
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
1149
# dump the program listings (including syntax highlighting 
1150
# and cross-referencing information) to the XML output. Note that 
1151
# enabling this will significantly increase the size of the XML output.
1152

    
1153
XML_PROGRAMLISTING     = YES
1154

    
1155
#---------------------------------------------------------------------------
1156
# configuration options for the AutoGen Definitions output
1157
#---------------------------------------------------------------------------
1158

    
1159
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
1160
# generate an AutoGen Definitions (see autogen.sf.net) file 
1161
# that captures the structure of the code including all 
1162
# documentation. Note that this feature is still experimental 
1163
# and incomplete at the moment.
1164

    
1165
GENERATE_AUTOGEN_DEF   = NO
1166

    
1167
#---------------------------------------------------------------------------
1168
# configuration options related to the Perl module output
1169
#---------------------------------------------------------------------------
1170

    
1171
# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
1172
# generate a Perl module file that captures the structure of 
1173
# the code including all documentation. Note that this 
1174
# feature is still experimental and incomplete at the 
1175
# moment.
1176

    
1177
GENERATE_PERLMOD       = NO
1178

    
1179
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
1180
# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
1181
# to generate PDF and DVI output from the Perl module output.
1182

    
1183
PERLMOD_LATEX          = NO
1184

    
1185
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
1186
# nicely formatted so it can be parsed by a human reader. 
1187
# This is useful 
1188
# if you want to understand what is going on. 
1189
# On the other hand, if this 
1190
# tag is set to NO the size of the Perl module output will be much smaller 
1191
# and Perl will parse it just the same.
1192

    
1193
PERLMOD_PRETTY         = YES
1194

    
1195
# The names of the make variables in the generated doxyrules.make file 
1196
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
1197
# This is useful so different doxyrules.make files included by the same 
1198
# Makefile don't overwrite each other's variables.
1199

    
1200
PERLMOD_MAKEVAR_PREFIX = 
1201

    
1202
#---------------------------------------------------------------------------
1203
# Configuration options related to the preprocessor   
1204
#---------------------------------------------------------------------------
1205

    
1206
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
1207
# evaluate all C-preprocessor directives found in the sources and include 
1208
# files.
1209

    
1210
ENABLE_PREPROCESSING   = YES
1211

    
1212
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
1213
# names in the source code. If set to NO (the default) only conditional 
1214
# compilation will be performed. Macro expansion can be done in a controlled 
1215
# way by setting EXPAND_ONLY_PREDEF to YES.
1216

    
1217
MACRO_EXPANSION        = NO
1218

    
1219
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
1220
# then the macro expansion is limited to the macros specified with the 
1221
# PREDEFINED and EXPAND_AS_DEFINED tags.
1222

    
1223
EXPAND_ONLY_PREDEF     = NO
1224

    
1225
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
1226
# in the INCLUDE_PATH (see below) will be search if a #include is found.
1227

    
1228
SEARCH_INCLUDES        = YES
1229

    
1230
# The INCLUDE_PATH tag can be used to specify one or more directories that 
1231
# contain include files that are not input files but should be processed by 
1232
# the preprocessor.
1233

    
1234
INCLUDE_PATH           = 
1235

    
1236
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
1237
# patterns (like *.h and *.hpp) to filter out the header-files in the 
1238
# directories. If left blank, the patterns specified with FILE_PATTERNS will 
1239
# be used.
1240

    
1241
INCLUDE_FILE_PATTERNS  = 
1242

    
1243
# The PREDEFINED tag can be used to specify one or more macro names that 
1244
# are defined before the preprocessor is started (similar to the -D option of 
1245
# gcc). The argument of the tag is a list of macros of the form: name 
1246
# or name=definition (no spaces). If the definition and the = are 
1247
# omitted =1 is assumed. To prevent a macro definition from being 
1248
# undefined via #undef or recursively expanded use the := operator 
1249
# instead of the = operator.
1250

    
1251
PREDEFINED             = 
1252

    
1253
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
1254
# this tag can be used to specify a list of macro names that should be expanded. 
1255
# The macro definition that is found in the sources will be used. 
1256
# Use the PREDEFINED tag if you want to use a different macro definition.
1257

    
1258
EXPAND_AS_DEFINED      = 
1259

    
1260
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
1261
# doxygen's preprocessor will remove all function-like macros that are alone 
1262
# on a line, have an all uppercase name, and do not end with a semicolon. Such 
1263
# function macros are typically used for boiler-plate code, and will confuse 
1264
# the parser if not removed.
1265

    
1266
SKIP_FUNCTION_MACROS   = YES
1267

    
1268
#---------------------------------------------------------------------------
1269
# Configuration::additions related to external references   
1270
#---------------------------------------------------------------------------
1271

    
1272
# The TAGFILES option can be used to specify one or more tagfiles. 
1273
# Optionally an initial location of the external documentation 
1274
# can be added for each tagfile. The format of a tag file without 
1275
# this location is as follows: 
1276
#  
1277
# TAGFILES = file1 file2 ... 
1278
# Adding location for the tag files is done as follows: 
1279
#  
1280
# TAGFILES = file1=loc1 "file2 = loc2" ... 
1281
# where "loc1" and "loc2" can be relative or absolute paths or 
1282
# URLs. If a location is present for each tag, the installdox tool 
1283
# does not have to be run to correct the links. 
1284
# Note that each tag file must have a unique name 
1285
# (where the name does NOT include the path) 
1286
# If a tag file is not located in the directory in which doxygen 
1287
# is run, you must also specify the path to the tagfile here.
1288

    
1289
TAGFILES               = 
1290

    
1291
# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
1292
# a tag file that is based on the input files it reads.
1293

    
1294
GENERATE_TAGFILE       = 
1295

    
1296
# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
1297
# in the class index. If set to NO only the inherited external classes 
1298
# will be listed.
1299

    
1300
ALLEXTERNALS           = NO
1301

    
1302
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
1303
# in the modules index. If set to NO, only the current project's groups will 
1304
# be listed.
1305

    
1306
EXTERNAL_GROUPS        = YES
1307

    
1308
# The PERL_PATH should be the absolute path and name of the perl script 
1309
# interpreter (i.e. the result of `which perl').
1310

    
1311
PERL_PATH              = /usr/bin/perl
1312

    
1313
#---------------------------------------------------------------------------
1314
# Configuration options related to the dot tool   
1315
#---------------------------------------------------------------------------
1316

    
1317
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
1318
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
1319
# or super classes. Setting the tag to NO turns the diagrams off. Note that 
1320
# this option is superseded by the HAVE_DOT option below. This is only a 
1321
# fallback. It is recommended to install and use dot, since it yields more 
1322
# powerful graphs.
1323

    
1324
CLASS_DIAGRAMS         = YES
1325

    
1326
# You can define message sequence charts within doxygen comments using the \msc 
1327
# command. Doxygen will then run the mscgen tool (see 
1328
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
1329
# documentation. The MSCGEN_PATH tag allows you to specify the directory where 
1330
# the mscgen tool resides. If left empty the tool is assumed to be found in the 
1331
# default search path.
1332

    
1333
MSCGEN_PATH            = 
1334

    
1335
# If set to YES, the inheritance and collaboration graphs will hide 
1336
# inheritance and usage relations if the target is undocumented 
1337
# or is not a class.
1338

    
1339
HIDE_UNDOC_RELATIONS   = YES
1340

    
1341
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
1342
# available from the path. This tool is part of Graphviz, a graph visualization 
1343
# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
1344
# have no effect if this option is set to NO (the default)
1345

    
1346
HAVE_DOT               = NO
1347

    
1348
# By default doxygen will write a font called FreeSans.ttf to the output 
1349
# directory and reference it in all dot files that doxygen generates. This 
1350
# font does not include all possible unicode characters however, so when you need 
1351
# these (or just want a differently looking font) you can specify the font name 
1352
# using DOT_FONTNAME. You need need to make sure dot is able to find the font, 
1353
# which can be done by putting it in a standard location or by setting the 
1354
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 
1355
# containing the font.
1356

    
1357
DOT_FONTNAME           = FreeSans
1358

    
1359
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 
1360
# The default size is 10pt.
1361

    
1362
DOT_FONTSIZE           = 10
1363

    
1364
# By default doxygen will tell dot to use the output directory to look for the 
1365
# FreeSans.ttf font (which doxygen will put there itself). If you specify a 
1366
# different font using DOT_FONTNAME you can set the path where dot 
1367
# can find it using this tag.
1368

    
1369
DOT_FONTPATH           = 
1370

    
1371
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
1372
# will generate a graph for each documented class showing the direct and 
1373
# indirect inheritance relations. Setting this tag to YES will force the 
1374
# the CLASS_DIAGRAMS tag to NO.
1375

    
1376
CLASS_GRAPH            = YES
1377

    
1378
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
1379
# will generate a graph for each documented class showing the direct and 
1380
# indirect implementation dependencies (inheritance, containment, and 
1381
# class references variables) of the class with other documented classes.
1382

    
1383
COLLABORATION_GRAPH    = YES
1384

    
1385
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
1386
# will generate a graph for groups, showing the direct groups dependencies
1387

    
1388
GROUP_GRAPHS           = YES
1389

    
1390
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
1391
# collaboration diagrams in a style similar to the OMG's Unified Modeling 
1392
# Language.
1393

    
1394
UML_LOOK               = NO
1395

    
1396
# If set to YES, the inheritance and collaboration graphs will show the 
1397
# relations between templates and their instances.
1398

    
1399
TEMPLATE_RELATIONS     = NO
1400

    
1401
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
1402
# tags are set to YES then doxygen will generate a graph for each documented 
1403
# file showing the direct and indirect include dependencies of the file with 
1404
# other documented files.
1405

    
1406
INCLUDE_GRAPH          = YES
1407

    
1408
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
1409
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
1410
# documented header file showing the documented files that directly or 
1411
# indirectly include this file.
1412

    
1413
INCLUDED_BY_GRAPH      = YES
1414

    
1415
# If the CALL_GRAPH and HAVE_DOT options are set to YES then 
1416
# doxygen will generate a call dependency graph for every global function 
1417
# or class method. Note that enabling this option will significantly increase 
1418
# the time of a run. So in most cases it will be better to enable call graphs 
1419
# for selected functions only using the \callgraph command.
1420

    
1421
CALL_GRAPH             = NO
1422

    
1423
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
1424
# doxygen will generate a caller dependency graph for every global function 
1425
# or class method. Note that enabling this option will significantly increase 
1426
# the time of a run. So in most cases it will be better to enable caller 
1427
# graphs for selected functions only using the \callergraph command.
1428

    
1429
CALLER_GRAPH           = NO
1430

    
1431
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
1432
# will graphical hierarchy of all classes instead of a textual one.
1433

    
1434
GRAPHICAL_HIERARCHY    = YES
1435

    
1436
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
1437
# then doxygen will show the dependencies a directory has on other directories 
1438
# in a graphical way. The dependency relations are determined by the #include 
1439
# relations between the files in the directories.
1440

    
1441
DIRECTORY_GRAPH        = YES
1442

    
1443
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
1444
# generated by dot. Possible values are png, jpg, or gif 
1445
# If left blank png will be used.
1446

    
1447
DOT_IMAGE_FORMAT       = png
1448

    
1449
# The tag DOT_PATH can be used to specify the path where the dot tool can be 
1450
# found. If left blank, it is assumed the dot tool can be found in the path.
1451

    
1452
DOT_PATH               = 
1453

    
1454
# The DOTFILE_DIRS tag can be used to specify one or more directories that 
1455
# contain dot files that are included in the documentation (see the 
1456
# \dotfile command).
1457

    
1458
DOTFILE_DIRS           = 
1459

    
1460
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
1461
# nodes that will be shown in the graph. If the number of nodes in a graph 
1462
# becomes larger than this value, doxygen will truncate the graph, which is 
1463
# visualized by representing a node as a red box. Note that doxygen if the 
1464
# number of direct children of the root node in a graph is already larger than 
1465
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
1466
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1467

    
1468
DOT_GRAPH_MAX_NODES    = 50
1469

    
1470
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
1471
# graphs generated by dot. A depth value of 3 means that only nodes reachable 
1472
# from the root by following a path via at most 3 edges will be shown. Nodes 
1473
# that lay further from the root node will be omitted. Note that setting this 
1474
# option to 1 or 2 may greatly reduce the computation time needed for large 
1475
# code bases. Also note that the size of a graph can be further restricted by 
1476
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1477

    
1478
MAX_DOT_GRAPH_DEPTH    = 0
1479

    
1480
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
1481
# background. This is disabled by default, because dot on Windows does not 
1482
# seem to support this out of the box. Warning: Depending on the platform used, 
1483
# enabling this option may lead to badly anti-aliased labels on the edges of 
1484
# a graph (i.e. they become hard to read).
1485

    
1486
DOT_TRANSPARENT        = NO
1487

    
1488
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
1489
# files in one run (i.e. multiple -o and -T options on the command line). This 
1490
# makes dot run faster, but since only newer versions of dot (>1.8.10) 
1491
# support this, this feature is disabled by default.
1492

    
1493
DOT_MULTI_TARGETS      = NO
1494

    
1495
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
1496
# generate a legend page explaining the meaning of the various boxes and 
1497
# arrows in the dot generated graphs.
1498

    
1499
GENERATE_LEGEND        = YES
1500

    
1501
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
1502
# remove the intermediate dot files that are used to generate 
1503
# the various graphs.
1504

    
1505
DOT_CLEANUP            = YES
1506

    
1507
#---------------------------------------------------------------------------
1508
# Options related to the search engine
1509
#---------------------------------------------------------------------------
1510

    
1511
# The SEARCHENGINE tag specifies whether or not a search engine should be 
1512
# used. If set to NO the values of all tags below this one will be ignored.
1513

    
1514
SEARCHENGINE           = NO