Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / colonet / utilities / robot_slave / Makefile @ 13

History | View | Annotate | Download (14.2 KB)

1
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik RouleauF
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging, 
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40

    
41
#if you want your code to work on the Firefly++ and not Firefly+
42
#then add the -DFFPP line to CDEFS
43
COLONYROOT = y:
44
CDEFS = 
45
#-DFFPP
46

    
47
# MCU name
48
MCU = atmega128
49

    
50

    
51
# Processor frequency.
52
#     This will define a symbol, F_CPU, in all source code files equal to the 
53
#     processor frequency. You can then use this symbol in your source code to 
54
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
55
#     automatically to create a 32-bit value in your source code.
56
F_CPU = 8000000
57

    
58

    
59
# Output format. (can be srec, ihex, binary)
60
FORMAT = ihex
61

    
62

    
63
# Target file name (without extension).
64
TARGET = robot_slave
65

    
66

    
67
# List C source files here. (C dependencies are automatically generated.)
68
SRC = $(wildcard *.c)
69
#$(TARGET).c 
70

    
71

    
72
# List Assembler source files here.
73
#     Make them always end in a capital .S.  Files ending in a lowercase .s
74
#     will not be considered source files but generated files (assembler
75
#     output from the compiler), and will be deleted upon "make clean"!
76
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
77
#     it will preserve the spelling of the filenames, and gcc itself does
78
#     care about how the name is spelled on its command-line.
79
ASRC = 
80

    
81

    
82
# Optimization level, can be [0, 1, 2, 3, s]. 
83
#     0 = turn off optimization. s = optimize for size.
84
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
85
OPT = s
86

    
87

    
88
# Debugging format.
89
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
90
#     AVR Studio 4.10 requires dwarf-2.
91
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
92
#DEBUG = dwarf-2
93

    
94

    
95
# List any extra directories to look for include files here.
96
#     Each directory must be seperated by a space.
97
#     Use forward slashes for directory separators.
98
#     For a directory that has spaces, enclose it in quotes.
99
EXTRAINCDIRS = /home/eugene/Robotics/Colony/roboclub_repository/svn/colony/code/colonet/lib/ ../../lib ../../lib/colonet_dragonfly/
100
#$(COLONYROOT)/code/
101
#C:\WinAVR\include\fwr
102

    
103

    
104
# Compiler flag to set the C Standard level.
105
#     c89   = "ANSI" C
106
#     gnu89 = c89 plus GCC extensions
107
#     c99   = ISO C99 standard (not yet fully implemented)
108
#     gnu99 = c99 plus GCC extensions
109
CSTANDARD = -std=gnu99
110

    
111

    
112
# Place -D or -U options here
113
CDEFS += -DF_CPU=$(F_CPU)UL 
114
CDEFS += -DFFP
115
CDEFS += -DUSE_STDIO
116

    
117

    
118
# Place -I options here
119
CINCS = 
120

    
121

    
122

    
123
#---------------- Compiler Options ----------------
124
#  -g*:          generate debugging information
125
#  -O*:          optimization level
126
#  -f...:        tuning, see GCC manual and avr-libc documentation
127
#  -Wall...:     warning level
128
#  -Wa,...:      tell GCC to pass this to the assembler.
129
#    -adhlns...: create assembler listing
130
CFLAGS = -g$(DEBUG)
131
CFLAGS += $(CDEFS) $(CINCS)
132
CFLAGS += -O$(OPT)
133
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
134
CFLAGS += -Wall -Wstrict-prototypes
135
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
136
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
137
CFLAGS += $(CSTANDARD)
138

    
139

    
140
#---------------- Assembler Options ----------------
141
#  -Wa,...:   tell GCC to pass this to the assembler.
142
#  -ahlms:    create listing
143
#  -gstabs:   have the assembler create line number information; note that
144
#             for use in COFF files, additional information about filenames
145
#             and function names needs to be present in the assembler source
146
#             files -- see avr-libc docs [FIXME: not yet described there]
147
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
148

    
149

    
150
#---------------- Library Options ----------------
151
# Minimalistic printf version
152
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
153

    
154
# Floating point printf version (requires MATH_LIB = -lm below)
155
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
156

    
157
# If this is left blank, then it will use the Standard printf version.
158
PRINTF_LIB = 
159
#PRINTF_LIB = $(PRINTF_LIB_MIN)
160
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
161

    
162

    
163
# Minimalistic scanf version
164
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
165

    
166
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
167
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
168

    
169
# If this is left blank, then it will use the Standard scanf version.
170
SCANF_LIB = 
171
#SCANF_LIB = $(SCANF_LIB_MIN)
172
#SCANF_LIB = $(SCANF_LIB_FLOAT)
173

    
174

    
175
MATH_LIB = -lm
176

    
177

    
178

    
179
#---------------- External Memory Options ----------------
180

    
181
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
182
# used for variables (.data/.bss) and heap (malloc()).
183
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
184

    
185
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
186
# only used for heap (malloc()).
187
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
188

    
189
EXTMEMOPTS =
190

    
191

    
192

    
193
#---------------- Linker Options ----------------
194
#  -Wl,...:     tell GCC to pass this to linker.
195
#    -Map:      create map file
196
#    --cref:    add cross reference to  map file
197
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
198
LDFLAGS += $(EXTMEMOPTS)
199
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) # -lcolonet_dragonfly 
200

    
201

    
202
#---------------- Programming Options (avrdude) ----------------
203

    
204
# Programming hardware: alf avr910 avrisp bascom bsd 
205
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
206
#
207
# Type: avrdude -c ?
208
# to get a full listing.
209
#
210
AVRDUDE_PROGRAMMER = avrisp
211

    
212
# com1 = serial port. Use lpt1 to connect to parallel port.
213
AVRDUDE_PORT = /dev/ttyUSB1 #com4
214
# programmer connected to serial device
215

    
216
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
217
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
218

    
219

    
220
# Uncomment the following if you want avrdude's erase cycle counter.
221
# Note that this counter needs to be initialized first using -Yn,
222
# see avrdude manual.
223
#AVRDUDE_ERASE_COUNTER = -y
224

    
225
# Uncomment the following if you do /not/ wish a verification to be
226
# performed after programming the device.
227
AVRDUDE_NO_VERIFY = -V
228

    
229
# Increase verbosity level.  Please use this when submitting bug
230
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
231
# to submit bug reports.
232
#AVRDUDE_VERBOSE = -v -v
233

    
234
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
235
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
236
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
237
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
238

    
239
#don't check for device signature
240
AVRDUDE_FLAGS += -F
241

    
242

    
243

    
244
#---------------- Debugging Options ----------------
245

    
246
# For simulavr only - target MCU frequency.
247
DEBUG_MFREQ = $(F_CPU)
248

    
249
# Set the DEBUG_UI to either gdb or insight.
250
# DEBUG_UI = gdb
251
DEBUG_UI = insight
252

    
253
# Set the debugging back-end to either avarice, simulavr.
254
DEBUG_BACKEND = avarice
255
#DEBUG_BACKEND = simulavr
256

    
257
# GDB Init Filename.
258
GDBINIT_FILE = __avr_gdbinit
259

    
260
# When using avarice settings for the JTAG
261
JTAG_DEV = /dev/ttyUSB0
262

    
263
# Debugging port used to communicate between GDB / avarice / simulavr.
264
DEBUG_PORT = 4242
265

    
266
# Debugging host used to communicate between GDB / avarice / simulavr, normally
267
#     just set to localhost unless doing some sort of crazy debugging when 
268
#     avarice is running on a different computer.
269
DEBUG_HOST = localhost
270

    
271

    
272

    
273
#============================================================================
274

    
275

    
276
# Define programs and commands.
277
SHELL = bash
278
CC = avr-gcc
279
OBJCOPY = avr-objcopy
280
OBJDUMP = avr-objdump
281
SIZE = avr-size
282
NM = avr-nm
283
AVRDUDE = avrdude
284
REMOVE = rm -f
285
REMOVEDIR = rm -rf
286
COPY = cp
287
WINSHELL = cmd
288

    
289

    
290
# Define Messages
291
# English
292
MSG_ERRORS_NONE = Errors: none
293
MSG_BEGIN = -------- begin --------
294
MSG_END = --------  end  --------
295
MSG_SIZE_BEFORE = Size before: 
296
MSG_SIZE_AFTER = Size after:
297
MSG_COFF = Converting to AVR COFF:
298
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
299
MSG_FLASH = Creating load file for Flash:
300
MSG_EEPROM = Creating load file for EEPROM:
301
MSG_EXTENDED_LISTING = Creating Extended Listing:
302
MSG_SYMBOL_TABLE = Creating Symbol Table:
303
MSG_LINKING = Linking:
304
MSG_COMPILING = Compiling:
305
MSG_ASSEMBLING = Assembling:
306
MSG_CLEANING = Cleaning project:
307

    
308

    
309

    
310

    
311
# Define all object files.
312
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
313

    
314
# Define all listing files.
315
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) 
316

    
317

    
318
# Compiler flags to generate dependency files.
319
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
320

    
321

    
322
# Combine all necessary flags and optional flags.
323
# Add target processor to flags.
324
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
325
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
326

    
327

    
328

    
329
# Default target.
330
all: begin gccversion sizebefore build sizeafter end
331

    
332
build: elf hex eep lss sym
333

    
334
elf: $(TARGET).elf
335
hex: $(TARGET).hex
336
eep: $(TARGET).eep
337
lss: $(TARGET).lss
338
sym: $(TARGET).sym
339

    
340

    
341

    
342
# Eye candy.
343
# AVR Studio 3.x does not check make's exit code but relies on
344
# the following magic strings to be generated by the compile job.
345
begin:
346
	@echo
347
	@echo $(MSG_BEGIN)
348

    
349
end:
350
	@echo $(MSG_END)
351
	@echo
352

    
353

    
354
# Display size of file.
355
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
356
ELFSIZE = $(SIZE) -A $(TARGET).elf
357
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
358

    
359
sizebefore:
360
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
361
	$(AVRMEM) 2>/dev/null; echo; fi
362

    
363
sizeafter:
364
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
365
	$(AVRMEM) 2>/dev/null; echo; fi
366

    
367

    
368

    
369
# Display compiler version information.
370
gccversion : 
371
	@$(CC) --version
372

    
373

    
374

    
375
# Program the device.  
376
program: $(TARGET).hex $(TARGET).eep
377
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
378

    
379

    
380
# Generate avr-gdb config/init file which does the following:
381
#     define the reset signal, load the target file, connect to target, and set 
382
#     a breakpoint at main().
383
gdb-config: 
384
	@$(REMOVE) $(GDBINIT_FILE)
385
	@echo define reset >> $(GDBINIT_FILE)
386
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
387
	@echo end >> $(GDBINIT_FILE)
388
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
389
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
390
ifeq ($(DEBUG_BACKEND),simulavr)
391
	@echo load  >> $(GDBINIT_FILE)
392
endif	
393
	@echo break main >> $(GDBINIT_FILE)
394
	
395
debug: gdb-config $(TARGET).elf
396
ifeq ($(DEBUG_BACKEND), avarice)
397
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
398
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
399
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
400
	@$(WINSHELL) /c pause
401
	
402
else
403
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
404
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
405
endif
406
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
407
	
408

    
409

    
410

    
411
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
412
COFFCONVERT=$(OBJCOPY) --debugging \
413
--change-section-address .data-0x800000 \
414
--change-section-address .bss-0x800000 \
415
--change-section-address .noinit-0x800000 \
416
--change-section-address .eeprom-0x810000 
417

    
418

    
419
coff: $(TARGET).elf
420
	@echo
421
	@echo $(MSG_COFF) $(TARGET).cof
422
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
423

    
424

    
425
extcoff: $(TARGET).elf
426
	@echo
427
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
428
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
429

    
430

    
431

    
432
# Create final output files (.hex, .eep) from ELF output file.
433
%.hex: %.elf
434
	@echo
435
	@echo $(MSG_FLASH) $@
436
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
437

    
438
%.eep: %.elf
439
	@echo
440
	@echo $(MSG_EEPROM) $@
441
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
442
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
443

    
444
# Create extended listing file from ELF output file.
445
%.lss: %.elf
446
	@echo
447
	@echo $(MSG_EXTENDED_LISTING) $@
448
	$(OBJDUMP) -h -S $< > $@
449

    
450
# Create a symbol table from ELF output file.
451
%.sym: %.elf
452
	@echo
453
	@echo $(MSG_SYMBOL_TABLE) $@
454
	$(NM) -n $< > $@
455

    
456

    
457

    
458
# Link: create ELF output file from object files.
459
.SECONDARY : $(TARGET).elf
460
.PRECIOUS : $(OBJ)
461
%.elf: $(OBJ)
462
	@echo
463
	@echo $(MSG_LINKING) $@
464
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) 
465

    
466

    
467
# Compile: create object files from C source files.
468
%.o : %.c
469
	@echo
470
	@echo $(MSG_COMPILING) $<
471
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
472

    
473

    
474
# Compile: create assembler files from C source files.
475
%.s : %.c
476
	$(CC) -S $(ALL_CFLAGS) $< -o $@
477

    
478

    
479
# Assemble: create object files from assembler source files.
480
%.o : %.S
481
	@echo
482
	@echo $(MSG_ASSEMBLING) $<
483
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
484

    
485
# Create preprocessed source for use in sending a bug report.
486
%.i : %.c
487
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
488

    
489

    
490
# Target: clean project.
491
clean: begin clean_list end
492

    
493
clean_list :
494
	@echo
495
	@echo $(MSG_CLEANING)
496
	$(REMOVE) $(TARGET).hex
497
	$(REMOVE) $(TARGET).eep
498
	$(REMOVE) $(TARGET).cof
499
	$(REMOVE) $(TARGET).elf
500
	$(REMOVE) $(TARGET).map
501
	$(REMOVE) $(TARGET).sym
502
	$(REMOVE) $(TARGET).lss
503
	$(REMOVE) $(OBJ)
504
	$(REMOVE) $(LST)
505
	$(REMOVE) $(SRC:.c=.s)
506
	$(REMOVE) $(SRC:.c=.d)
507
	$(REMOVEDIR) .dep
508

    
509

    
510

    
511
# Include the dependency files.
512
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
513

    
514

    
515
# Listing of phony targets.
516
.PHONY : all begin finish end sizebefore sizeafter gccversion \
517
build elf hex eep lss sym coff extcoff \
518
clean clean_list program debug gdb-config
519