root / branches / simulator / projects / simulator / simulator / core / motion.c @ 1092
History | View | Annotate | Download (2.83 KB)
1 | 1006 | bcoltin | #include <stdio.h> |
---|---|---|---|
2 | 1027 | chihsiuh | #include <stdlib.h> |
3 | 1006 | bcoltin | #include <math.h> |
4 | |||
5 | #include "motion.h" |
||
6 | 1091 | bpoole | #include "rangefinders.h" |
7 | 1010 | bcoltin | #include "robot.h" |
8 | |||
9 | 1027 | chihsiuh | #define CUTOFF 120 |
10 | #define TIME 1 /*sec*/ |
||
11 | 1006 | bcoltin | #define ROBOT_WIDTH 131 /*mm*/ |
12 | |||
13 | 1092 | bpoole | #define MOTOR_CONVERSION_FACTOR 1000.0 |
14 | 1020 | bcoltin | |
15 | 1090 | bpoole | #define FUDGE 10 /* minimum rangefinder distance until collision */ |
16 | |||
17 | 1027 | chihsiuh | /** move_robot will move a robot from its initial position, (x,y), and theta (in radians) to a new position given speed.
|
18 | * (x,y) and theta will be updated by the move_robot function instead of returning a value
|
||
19 | * (x,y) is some kind of absolute position in the "world", (0,0) is the top left of the "world"
|
||
20 | * theta will an angle be between 0 and 2*Pi (0 being faces east and goes clockwise)
|
||
21 | * speed is between 0 and 255, there is some magical cutoff point before the motors actually starts running
|
||
22 | 1006 | bcoltin | * move will return 0 if successful
|
23 | **/
|
||
24 | 1010 | bcoltin | int move_robot(Robot* r)
|
25 | { |
||
26 | 1092 | bpoole | printf("Called motion\n");
|
27 | 1090 | bpoole | Pose old_pose = r->pose; |
28 | |||
29 | 1010 | bcoltin | short speed1 = r->shared->motor1;
|
30 | short speed2 = r->shared->motor2;
|
||
31 | float theta = r->pose.theta;
|
||
32 | 1075 | bjy | |
33 | 1010 | bcoltin | if (theta < 0 || theta > 2*M_PI) return 1; |
34 | 1075 | bjy | if (speed1 < -255 || speed1 > 255) return 1; |
35 | if (speed2 < -255 || speed2 > 255) return 1; |
||
36 | 1006 | bcoltin | |
37 | 1010 | bcoltin | /* if speed is lower than the cut off, don't move */
|
38 | 1027 | chihsiuh | if (abs(speed1) < CUTOFF) {
|
39 | 1010 | bcoltin | speed1 = 0;
|
40 | } |
||
41 | 1027 | chihsiuh | if (abs(speed2) < CUTOFF) {
|
42 | 1010 | bcoltin | speed2 = 0;
|
43 | } |
||
44 | 1046 | chihsiuh | |
45 | 1010 | bcoltin | double radius;
|
46 | 1092 | bpoole | int divide;
|
47 | 1010 | bcoltin | if (speed1 == speed2) {
|
48 | 1027 | chihsiuh | /* go straight */
|
49 | r->pose.x += cos(theta) * speed1 / MOTOR_CONVERSION_FACTOR; |
||
50 | r->pose.y += sin(theta) * speed1 / MOTOR_CONVERSION_FACTOR; |
||
51 | 1092 | bpoole | for (divide = 0; divide < 5; divide++) { |
52 | /* Lets just call this a collision... */
|
||
53 | printf("%d: %d\n",divide,r->shared->ranges.d[divide]);
|
||
54 | if (r->shared->ranges.d[divide] < FUDGE) {
|
||
55 | /* Restore x,y, but allow rotation */
|
||
56 | r->pose.x = old_pose.x; |
||
57 | r->pose.y = old_pose.y; |
||
58 | |||
59 | /* Rotated robot, need to recalculate */
|
||
60 | update_rangefinders(r); |
||
61 | return 0; |
||
62 | } |
||
63 | } |
||
64 | 1027 | chihsiuh | return 0; |
65 | 1010 | bcoltin | } |
66 | radius = ROBOT_WIDTH * speed1 / (speed1 - speed2); |
||
67 | |||
68 | 1020 | bcoltin | double t = speed1 / radius / MOTOR_CONVERSION_FACTOR;
|
69 | 1006 | bcoltin | |
70 | 1020 | bcoltin | double newx = (radius * sin(t)) / MOTOR_CONVERSION_FACTOR;
|
71 | double newy = (radius - radius * cos(t)) / MOTOR_CONVERSION_FACTOR;
|
||
72 | 1019 | bcoltin | |
73 | 1010 | bcoltin | r->pose.x += newx * cos(theta); |
74 | r->pose.y += newx * sin(theta); |
||
75 | 1006 | bcoltin | |
76 | 1010 | bcoltin | r->pose.x += newy * - sin(theta); |
77 | r->pose.y += newy * cos(theta); |
||
78 | 1019 | bcoltin | |
79 | 1092 | bpoole | divide = (t+r->pose.theta)/(2 * M_PI);
|
80 | 1019 | bcoltin | r->pose.theta = (t+r->pose.theta) - (2 * M_PI * divide);
|
81 | 1010 | bcoltin | if (r->pose.theta<0) r->pose.theta += 2 * M_PI; |
82 | |||
83 | 1090 | bpoole | /* XXX: this is a terrible hack */
|
84 | update_rangefinders(r); |
||
85 | for (divide = 0; divide < 5; divide++) { |
||
86 | 1091 | bpoole | /* Lets just call this a collision... */
|
87 | 1092 | bpoole | printf("%d: %d\n",divide,r->shared->ranges.d[divide]);
|
88 | 1090 | bpoole | if (r->shared->ranges.d[divide] < FUDGE) {
|
89 | 1091 | bpoole | /* Restore x,y, but allow rotation */
|
90 | r->pose.x = old_pose.x; |
||
91 | r->pose.y = old_pose.y; |
||
92 | |||
93 | /* Rotated robot, need to recalculate */
|
||
94 | update_rangefinders(r); |
||
95 | 1090 | bpoole | return 0; |
96 | } |
||
97 | } |
||
98 | |||
99 | 1010 | bcoltin | return 0; |
100 | 1006 | bcoltin | } |