Implemented all robot sensor dump functions
Changed some function signatures for robot communication
Added interactive dump modesChanged RBOM detector number and names
Added poster template for 08-09
Moved interactive_main to comm_interactive.cAdded multiple menus in interactive mode
Miner script cleanup
Put latest input.txt in matlab directory.
Smart run around FSM + mapping works!!! I don't know what I did.
Added plotting script
Run around now uses R4 and R5.
Replaced old orb_enable() with new orb_init().
Robot/Station communication:- Implemented timeouts- Implemented command acknowledgement
Sorry for uploading such a big file, hopefully I removed this before it was on too many computers.
Added reset_encoders commandFixed bugs
Fixing Station/Robot communication
Implemented encoders test
Implemented motors test
Finished rangefinders test implementation
Finished the bom test (calling the not-finished hardware functions for now)
Changes to the sensor modeling code. (Mostly from a better understanding of imtransform).
Fixes to the sensor mapping code. Works now! (Sort of)
Movie. Wanted to have it here for transfer to my computer.
Moved usb_puts_P from diagnostic station to library
Added usb_puts_P
Fixed code duplication
Implemented single encoder testingCleaned up motor direction/wall direction naming
Implemented single motor testing
Station server communication: implemented dummy data sending
Station/server communication: - Implemented backspace handling - Implemented all test starting commands with parameterTests: - Added functions for testing only one component of a kind - Made function names consistent with server commands
Changed smart run-around from old version to new version, which seems kind of silly, since the rangefinder functions didn't actually change.
Smart run around produces more of a wall-following behavior at this point. Rangefinder readings are clearly not in cm. I have assumed that theygive the distance in mm but 50 mm too large. I don't think this is correct, but the robot does not crash, so I left. The states do what they are ...
Created new directory for development of new smart run around. Although thismakes no sense WRT the structure of the repository, it will allow autonomousmapping to continue to function during the development of the new smart runaround while still keeping the new smart run around conveniently close to...
Added server communication parameter parsingMisc. fixes
finished sending encoder data
finished storing encoder data
defs for robot -> station communication
robot can send data to station
added infrastructure for robot to send data to station
Eliminated stationCode folder by merging necessary components into station folder.
Changed Makefile target name to target
Added multiple main functions hack
Added atomic.h
Server communication: basic message processing
Added individual hardware component files
Made filenames more consistentMade function names more consistentIntroduced separate functions for hardware components
Made it compile again
Started work on server communication code
added read encoders command
Added server_comm.c/server_comm.hAdded tests.c/tests.h
Encoder code added, tested, works. There are 720 ticks per dyno shaft revolution.
added encoder read command for station
Added # to the beginning of every USB output line, as it should not be interpreted by the server.
Removed UI/, it has been merged into station/main
Added message_set_motors_timeAdded message_set_motors_off
Replace smart_run_around_fsm.c with the one that simulator has been using, which apparently uses the new rangefinder interface.
Some changes to match the updated library.
Do all tests if button 1 is pressed after startup.
Added robot codeAdded robot/station communication
More tests
Removed killing of the terminal process from the MakefileIt's a bad idea if you are using a terminal for a different port.
Added wireless test behavior
Added missing inttypes header
Added self test and communications test
Added OS detection to MakefileAdded robot and station directories
Added some papers guiding the current approach, and commented some.
Modified sensor_map to use 'model_sensor' to plug in a sensor model to map with. Model sensor is meant to be an array of sensor models, one for distances from 10cm to 70cm.
make dist
Generated documentation for new orbs code
Fixed Makefile docsFixed documentation
Added usb_puth* to serial.c/serial.h
Merged new orbs codeAdded atomic.hFixed whitespace in eeprom.h
Added functions to allow for user-viewable data dump versus a computer-usable data dump. Code will sample specified ports and print values. Was used to determine which ports are being used for the inverse BOM.
Includes code to sample all analog inputs. Used to determine which ports the inverse BOM are connected to.
Committing some test files, as well as an updated version of the sensor mapping code.
Added a heavily modified version of map.m called sensor_map, which first constructs a sensor model, then maps data according to the sensor model. NEEDS to be converted to log-odds to speed up computation. There is still a transformation that needs to take place per datapoint per sensor, but ...
Small update to code which reads analog ports.
Put smart run around FSM in autonomous mapping programRobot goes into BACKWARDS mode a few seconds after starting up and apparently cannot be diverted
made packet group and packet type for odometry packets separate #defines
got rid of old stuff for driving from the computer
Updated README files to better reflect folder contents.
Continued to reorganize file structure. Added README files to upper level file structure.
Reorganizing file structure.
Server code.
Evan's UI code.
Added code to station code version 1 to read from analog wheel port
Changed template code which displays orbs.
Reverted changes accidentally committed
OS autodetection
Makefile OS autodetection