From 10/08/2012 to 11/06/2012
- 05:28 pm Revision 85dff67b: Modified to compile.
- 04:51 pm Revision a07a0b55: wrote code for the stepper motor. Requires that the caller calls init with
- the time that the function returned by the init function will be called.
then the user must call this function at the...
- 10:21 pm Revision 8999628c: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 10:19 pm Revision aadf0a75: Fixed interrupt bug in AVR serial code
- Serial read disabled interrupts at the start, and returned before
reenabling them. Also, made a few other changes in ...
- 10:18 pm Revision fd73d758: Changed range sensor to read on-demand
- 01:03 pm Revision 68b23184: Scoutsim: Added Sonar Toggle
- Sonar display can now be toggled via Menu->Sim->Sonar
- 03:32 pm Revision 812788aa: Moved some sensors to different timers
- Most notably, change the ROS millisecond counter to share the BOM 38 kHz
timer instead of having its own. The range s...
- 09:24 pm Revision 0e77683c: Added built-in scoutsim teleop!
- 07:48 pm Revision 759ac4fc: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 07:48 pm Revision e2770306: Generate a blank image for lines/walls if one doesn't exist.
- 06:01 pm Revision 43b327cb: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 05:58 pm Revision 6639ce9c: Edited Sonar to display points on simulator.
- Changed rate of sonar scan to 0.5s
Made a new wxDC graphics object for sonar
- 04:48 pm Revision 479d25d8: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 04:47 pm Revision 3db79f25: Fixed Odometry behavior so that it now works and then added a get readings fu...
- 04:37 pm Revision d140fd71: Added Sensors class that abstracts away sensors from behaviors. Stops creating
- duplicated sensors for each scout.
- 03:49 pm Revision 8a4624e7: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 03:46 pm Revision 8efaf0cc: Added race_walls again, whoops.
- 03:43 pm Revision 3e877fe7: Added a new grid map for testing.
- 02:57 pm Revision 1d819b33: Updated scout size. Now 1px = 0.5cm.
- 06:40 pm Revision dfb92d66: Merge branch 'master' of ssh://roboclub.org/home/svn/scoutos
- 06:31 pm Revision 5755691e: Added initial GUI for testing, renamed cw and ccw behaviors
- 06:20 pm Revision 71e1154d: Sonar works!
- Also added new testing files for sonar - maps/racetest*.bmp
- 10:02 pm Revision a2e6bd4c: Added sonar, though it looks buggy.
- Use sonar_viz to continue debugging and make sonar work!
- 01:15 pm Revision f024710b: Added actual reads from hardware to encoder.ko
- Not yet tested on Gumstix (especially since I don't think we have the
- 11:03 pm Revision 32b36ecc: Added sources.list to /etc
- 06:46 pm Revision 2581167d: Added udev rules file for pwm devices
- 05:29 pm Revision 7e9a19f4: Added flush to motors node so hardware values actually change
- 05:09 pm Revision a0644b40: Fixed mistake in rc.local
- Changed chown to chmod.
- 05:30 pm Revision 0276f557: Added /etc/modules, and changed network setup
- Removed /etc/network/interfaces, which blocks until a dhcp server gives
the Gumstix an IP address resulting in a boot...
- 11:29 am Revision ed37d345: Finished adding gpio control to motors node
- I changed the Motor constructor to take pin numbers instead of file
names, and construct the file names itself. All t...
- 11:29 am Revision 8969d535: Changed "download" to "program" in scout_avr Makefile
- 02:28 pm Revision 83163372: Added kernel module for quad encoders
- The kernel module is not finished yet. Also, added various config files
that go on every Gumstix. It would be nice to...
Also available in: Atom