commit b76ae2da03c8d9fb7523e8c7589f44e9e438d094
Author: Julian Binder <jabinder@andrew.cmu.edu>
Date:   Sun Nov 11 00:12:50 2012 -0500

    Created a new library jabinder.lbr
    Added parts for 18650 double battery holder, LT3650 two cell li-ion battery
    charger and 2x2 SMT molex headers
    Also made schematic for a board that charges batteries that can
    be added to the battery holder so tht such circuit is not neccessary on
    scoutfly
    Also added board file for this circuit, but all it has is parts

diff --git a/batboard/batboard.brd b/batboard/batboard.brd
new file mode 100644
index 0000000..ec3055c
--- /dev/null
+++ b/batboard/batboard.brd
@@ -0,0 +1,596 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="6.3">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.05" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.025" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
+<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
+<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
+<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
+<layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
+<layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="no" active="no"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="no" active="no"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="no"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="no" active="no"/>
+<layer number="95" name="Names" color="7" fill="1" visible="no" active="no"/>
+<layer number="96" name="Values" color="7" fill="1" visible="no" active="no"/>
+<layer number="97" name="Info" color="7" fill="1" visible="no" active="no"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="no" active="no"/>
+<layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
+<layer number="101" name="Patch_Top" color="12" fill="4" visible="no" active="yes"/>
+<layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
+<layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
+<layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
+<layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
+<layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
+<layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
+<layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
+<layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
+<layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
+<layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
+<layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
+<layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
+<layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
+<layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
+<layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
+<layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
+<layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
+<layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
+<layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
+<layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
+<layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
+<layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
+<layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
+<layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
+<layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
+<layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
+<layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
+<layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
+<layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
+<layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
+<layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
+<layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
+</layers>
+<board>
+<plain>
+<wire x1="0" y1="0" x2="160" y2="0" width="0" layer="20"/>
+<wire x1="160" y1="0" x2="160" y2="100" width="0" layer="20"/>
+<wire x1="160" y1="100" x2="0" y2="100" width="0" layer="20"/>
+<wire x1="0" y1="100" x2="0" y2="0" width="0" layer="20"/>
+</plain>
+<libraries>
+<library name="jabinder">
+<packages>
+<package name="18650-PC4">
+<pad name="+1" x="-36.195" y="9.652" drill="1.524"/>
+<pad name="-1" x="36.195" y="9.652" drill="1.524"/>
+<pad name="-2" x="36.195" y="-9.652" drill="1.524"/>
+<pad name="+2" x="-36.195" y="-9.652" drill="1.524"/>
+<wire x1="-38.862" y1="20.066" x2="-38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="38.862" y1="20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="20.066" x2="38.862" y2="20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="-20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<hole x="-27.813" y="9.652" drill="3.2004"/>
+<hole x="-27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="9.652" drill="3.2004"/>
+<text x="-34.29" y="8.382" size="2.54" layer="21">+</text>
+<text x="-34.29" y="-10.922" size="2.54" layer="21">+</text>
+<text x="33.02" y="8.128" size="2.54" layer="21">-</text>
+<text x="33.02" y="-10.922" size="2.54" layer="21">-</text>
+</package>
+<package name="12-MSOP">
+<smd name="12" x="-1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="11" x="-0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="10" x="-0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="9" x="0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="8" x="0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="7" x="1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="1" x="-1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="2" x="-0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="3" x="-0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="4" x="0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="5" x="0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="6" x="1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="GND" x="0" y="0" dx="2.8448" dy="1.651" layer="1"/>
+<wire x1="2.0193" y1="1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="-2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="2.0193" y2="1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="-1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<text x="-1.98881875" y="-1.0414" size="1.27" layer="21">.</text>
+<text x="-2.54" y="-2.54" size="1.016" layer="21">1</text>
+</package>
+<package name="4HEAD_MOLEX_C71308">
+<smd name="4" x="-1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="3" x="1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="1" x="-1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="2" x="1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<wire x1="-2.54" y1="3.81" x2="-2.54" y2="-3.81" width="0.127" layer="21"/>
+<wire x1="2.54" y1="3.81" x2="2.54" y2="-3.81" width="0.127" layer="21"/>
+<text x="-2.54" y="-3.81" size="1.27" layer="21">.</text>
+<text x="4.064" y="-2.54" size="1.27" layer="25" rot="R90">&gt;Name</text>
+</package>
+</packages>
+</library>
+<library name="SparkFun-Capacitors">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="0805">
+<wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
+<wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
+<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+</library>
+<library name="SparkFun-DiscreteSemi">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="SMA-DIODE">
+<description>&lt;B&gt;Diode&lt;/B&gt;&lt;p&gt;
+Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140</description>
+<wire x1="-2.3" y1="1" x2="-2.3" y2="1.45" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="1.45" x2="2.3" y2="1.45" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="1.45" x2="2.3" y2="1" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="-1" x2="2.3" y2="-1.45" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="-1.45" x2="-2.3" y2="-1.45" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.45" x2="-2.3" y2="-1" width="0.2032" layer="21"/>
+<wire x1="1" y1="1" x2="1" y2="-1" width="0.2032" layer="21"/>
+<smd name="A" x="-2.15" y="0" dx="1.27" dy="1.47" layer="1" rot="R180"/>
+<smd name="C" x="2.15" y="0" dx="1.27" dy="1.47" layer="1"/>
+<text x="-2.286" y="1.651" size="0.4064" layer="25">&gt;NAME</text>
+<text x="0.254" y="1.651" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+</library>
+<library name="inductor-neosid">
+<description>&lt;b&gt;Neosid Chokes and Transformers&lt;/b&gt;&lt;p&gt;
+
+Based on the following sources:
+&lt;ul&gt;
+&lt;li&gt;Electronic Component Book, Part 2 : Chokes, Fixed Value Inductors
+&lt;li&gt;Part 3 : Filters, Coil Assemblies, Thermoplastic Parts
+&lt;li&gt;Part 4 : SMD Filters, Coils, Fixed Value Inductors
+&lt;li&gt;www.neosid.de
+&lt;/ul&gt;
+ &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="SM-1206">
+<description>SMD CHIP &lt;B&gt;INDUCTOR&lt;/B&gt;&lt;p&gt;
+body 1206</description>
+<wire x1="1.3" y1="0.7" x2="1.3" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="0.6" x2="1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="-0.6" x2="1.3" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="-0.7" x2="2.1" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="2.1" y1="-0.7" x2="2.1" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="2.1" y1="0.7" x2="1.3" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-2.1" y1="0.7" x2="-2.1" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="-2.1" y1="-0.7" x2="-1.3" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.7" x2="-1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.6" x2="-1.3" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="0.6" x2="-1.3" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="0.7" x2="-2.1" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.6" x2="-0.9" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="-0.9" y1="-0.6" x2="0.9" y2="-0.6" width="0.2032" layer="21"/>
+<wire x1="0.9" y1="-0.6" x2="1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="0.6" x2="0.9" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="0.9" y1="0.6" x2="-0.9" y2="0.6" width="0.2032" layer="21"/>
+<wire x1="-0.9" y1="0.6" x2="-1.3" y2="0.6" width="0.2032" layer="51"/>
+<smd name="1" x="-1.65" y="0" dx="1.2" dy="1.8" layer="1"/>
+<smd name="2" x="1.65" y="0" dx="1.2" dy="1.8" layer="1"/>
+<text x="-2.143" y="0.997" size="1.27" layer="25">&gt;NAME</text>
+<text x="-2.208" y="-2.308" size="1.27" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+</library>
+<library name="SparkFun-Passives">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="0805">
+<wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
+<wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
+<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+</library>
+<library name="SparkFun-Connectors">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="1X02">
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+</packages>
+</library>
+</libraries>
+<attributes>
+</attributes>
+<variantdefs>
+</variantdefs>
+<classes>
+<class number="0" name="default" width="0" drill="0">
+</class>
+</classes>
+<designrules name="default">
+<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
+&lt;p&gt;
+Die Standard-Design-Rules sind so gewählt, dass sie für 
+die meisten Anwendungen passen. Sollte ihre Platine 
+besondere Anforderungen haben, treffen Sie die erforderlichen
+Einstellungen hier und speichern die Design Rules unter 
+einem neuen Namen ab.</description>
+<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
+&lt;p&gt;
+The default Design Rules have been set to cover
+a wide range of applications. Your particular design
+may have different requirements, so please make the
+necessary adjustments and save your customized
+design rules under a new name.</description>
+<param name="layerSetup" value="(1*16)"/>
+<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
+<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
+<param name="mdWireWire" value="8mil"/>
+<param name="mdWirePad" value="8mil"/>
+<param name="mdWireVia" value="8mil"/>
+<param name="mdPadPad" value="8mil"/>
+<param name="mdPadVia" value="8mil"/>
+<param name="mdViaVia" value="8mil"/>
+<param name="mdSmdPad" value="8mil"/>
+<param name="mdSmdVia" value="8mil"/>
+<param name="mdSmdSmd" value="8mil"/>
+<param name="mdViaViaSameLayer" value="8mil"/>
+<param name="mnLayersViaInSmd" value="2"/>
+<param name="mdCopperDimension" value="40mil"/>
+<param name="mdDrill" value="8mil"/>
+<param name="mdSmdStop" value="0mil"/>
+<param name="msWidth" value="10mil"/>
+<param name="msDrill" value="24mil"/>
+<param name="msMicroVia" value="9.99mm"/>
+<param name="msBlindViaRatio" value="0.5"/>
+<param name="rvPadTop" value="0.25"/>
+<param name="rvPadInner" value="0.25"/>
+<param name="rvPadBottom" value="0.25"/>
+<param name="rvViaOuter" value="0.25"/>
+<param name="rvViaInner" value="0.25"/>
+<param name="rvMicroViaOuter" value="0.25"/>
+<param name="rvMicroViaInner" value="0.25"/>
+<param name="rlMinPadTop" value="10mil"/>
+<param name="rlMaxPadTop" value="20mil"/>
+<param name="rlMinPadInner" value="10mil"/>
+<param name="rlMaxPadInner" value="20mil"/>
+<param name="rlMinPadBottom" value="10mil"/>
+<param name="rlMaxPadBottom" value="20mil"/>
+<param name="rlMinViaOuter" value="8mil"/>
+<param name="rlMaxViaOuter" value="20mil"/>
+<param name="rlMinViaInner" value="8mil"/>
+<param name="rlMaxViaInner" value="20mil"/>
+<param name="rlMinMicroViaOuter" value="4mil"/>
+<param name="rlMaxMicroViaOuter" value="20mil"/>
+<param name="rlMinMicroViaInner" value="4mil"/>
+<param name="rlMaxMicroViaInner" value="20mil"/>
+<param name="psTop" value="-1"/>
+<param name="psBottom" value="-1"/>
+<param name="psFirst" value="-1"/>
+<param name="psElongationLong" value="100"/>
+<param name="psElongationOffset" value="100"/>
+<param name="mvStopFrame" value="1"/>
+<param name="mvCreamFrame" value="0"/>
+<param name="mlMinStopFrame" value="4mil"/>
+<param name="mlMaxStopFrame" value="4mil"/>
+<param name="mlMinCreamFrame" value="0mil"/>
+<param name="mlMaxCreamFrame" value="0mil"/>
+<param name="mlViaStopLimit" value="0mil"/>
+<param name="srRoundness" value="0"/>
+<param name="srMinRoundness" value="0mil"/>
+<param name="srMaxRoundness" value="0mil"/>
+<param name="slThermalIsolate" value="10mil"/>
+<param name="slThermalsForVias" value="0"/>
+<param name="dpMaxLengthDifference" value="10mm"/>
+<param name="dpGapFactor" value="2.5"/>
+<param name="checkGrid" value="0"/>
+<param name="checkAngle" value="0"/>
+<param name="checkFont" value="1"/>
+<param name="checkRestrict" value="1"/>
+<param name="useDiameter" value="13"/>
+<param name="maxErrors" value="50"/>
+</designrules>
+<autorouter>
+<pass name="Default">
+<param name="RoutingGrid" value="50mil"/>
+<param name="tpViaShape" value="round"/>
+<param name="PrefDir.1" value="|"/>
+<param name="PrefDir.2" value="0"/>
+<param name="PrefDir.3" value="0"/>
+<param name="PrefDir.4" value="0"/>
+<param name="PrefDir.5" value="0"/>
+<param name="PrefDir.6" value="0"/>
+<param name="PrefDir.7" value="0"/>
+<param name="PrefDir.8" value="0"/>
+<param name="PrefDir.9" value="0"/>
+<param name="PrefDir.10" value="0"/>
+<param name="PrefDir.11" value="0"/>
+<param name="PrefDir.12" value="0"/>
+<param name="PrefDir.13" value="0"/>
+<param name="PrefDir.14" value="0"/>
+<param name="PrefDir.15" value="0"/>
+<param name="PrefDir.16" value="-"/>
+<param name="cfVia" value="8"/>
+<param name="cfNonPref" value="5"/>
+<param name="cfChangeDir" value="2"/>
+<param name="cfOrthStep" value="2"/>
+<param name="cfDiagStep" value="3"/>
+<param name="cfExtdStep" value="0"/>
+<param name="cfBonusStep" value="1"/>
+<param name="cfMalusStep" value="1"/>
+<param name="cfPadImpact" value="4"/>
+<param name="cfSmdImpact" value="4"/>
+<param name="cfBusImpact" value="0"/>
+<param name="cfHugging" value="3"/>
+<param name="cfAvoid" value="4"/>
+<param name="cfPolygon" value="10"/>
+<param name="cfBase.1" value="0"/>
+<param name="cfBase.2" value="1"/>
+<param name="cfBase.3" value="1"/>
+<param name="cfBase.4" value="1"/>
+<param name="cfBase.5" value="1"/>
+<param name="cfBase.6" value="1"/>
+<param name="cfBase.7" value="1"/>
+<param name="cfBase.8" value="1"/>
+<param name="cfBase.9" value="1"/>
+<param name="cfBase.10" value="1"/>
+<param name="cfBase.11" value="1"/>
+<param name="cfBase.12" value="1"/>
+<param name="cfBase.13" value="1"/>
+<param name="cfBase.14" value="1"/>
+<param name="cfBase.15" value="1"/>
+<param name="cfBase.16" value="0"/>
+<param name="mnVias" value="20"/>
+<param name="mnSegments" value="9999"/>
+<param name="mnExtdSteps" value="9999"/>
+<param name="mnRipupLevel" value="10"/>
+<param name="mnRipupSteps" value="100"/>
+<param name="mnRipupTotal" value="100"/>
+</pass>
+<pass name="Follow-me" refer="Default" active="yes">
+</pass>
+<pass name="Busses" refer="Default" active="yes">
+<param name="cfNonPref" value="4"/>
+<param name="cfBusImpact" value="4"/>
+<param name="cfHugging" value="0"/>
+<param name="mnVias" value="0"/>
+</pass>
+<pass name="Route" refer="Default" active="yes">
+</pass>
+<pass name="Optimize1" refer="Default" active="yes">
+<param name="cfVia" value="99"/>
+<param name="cfExtdStep" value="10"/>
+<param name="cfHugging" value="1"/>
+<param name="mnExtdSteps" value="1"/>
+<param name="mnRipupLevel" value="0"/>
+</pass>
+<pass name="Optimize2" refer="Optimize1" active="yes">
+<param name="cfNonPref" value="0"/>
+<param name="cfChangeDir" value="6"/>
+<param name="cfExtdStep" value="0"/>
+<param name="cfBonusStep" value="2"/>
+<param name="cfMalusStep" value="2"/>
+<param name="cfPadImpact" value="2"/>
+<param name="cfSmdImpact" value="2"/>
+<param name="cfHugging" value="0"/>
+</pass>
+<pass name="Optimize3" refer="Optimize2" active="yes">
+<param name="cfChangeDir" value="8"/>
+<param name="cfPadImpact" value="0"/>
+<param name="cfSmdImpact" value="0"/>
+</pass>
+<pass name="Optimize4" refer="Optimize3" active="yes">
+<param name="cfChangeDir" value="25"/>
+</pass>
+</autorouter>
+<elements>
+<element name="U$1" library="jabinder" package="18650-PC4" value="BK-18650-PC4" x="-52.07" y="20.32"/>
+<element name="U2" library="jabinder" package="12-MSOP" value="LT3650" x="-93.98" y="3.81"/>
+<element name="CHRG" library="jabinder" package="4HEAD_MOLEX_C71308" value="C-GRID-71308" x="-101.6" y="5.08"/>
+<element name="BAT" library="jabinder" package="4HEAD_MOLEX_C71308" value="C-GRID-71308" x="-109.22" y="5.08"/>
+<element name="C1" library="SparkFun-Capacitors" package="0805" value="10uF" x="-114.3" y="2.54"/>
+<element name="C2" library="SparkFun-Capacitors" package="0805" value="1uF" x="-118.11" y="2.54"/>
+<element name="D1" library="SparkFun-DiscreteSemi" package="SMA-DIODE" value="DIODE-SCHOTTKY_" x="-115.57" y="-2.54"/>
+<element name="L1" library="inductor-neosid" package="SM-1206" value="6.8uH" x="-115.57" y="-7.62">
+<attribute name="OC_NEWARK" value="unknown" x="-115.57" y="-7.62" size="1.778" layer="27" display="off"/>
+<attribute name="MPN" value="" x="-115.57" y="-7.62" size="1.778" layer="27" display="off"/>
+<attribute name="MF" value="" x="-115.57" y="-7.62" size="1.778" layer="27" display="off"/>
+<attribute name="OC_FARNELL" value="unknown" x="-115.57" y="-7.62" size="1.778" layer="27" display="off"/>
+</element>
+<element name="C3" library="SparkFun-Capacitors" package="0805" value="10uF" x="-121.92" y="-7.62"/>
+<element name="R1" library="SparkFun-Passives" package="0805" value="0.05" x="-125.73" y="-7.62"/>
+<element name="JP1" library="SparkFun-Connectors" package="1X02" value="" x="-124.46" y="-13.97"/>
+<element name="C4" library="SparkFun-Capacitors" package="0805" value="0.68uF" x="-129.54" y="-12.7"/>
+<element name="D2" library="SparkFun-DiscreteSemi" package="SMA-DIODE" value="DIODE-SCHOTTKY_" x="-127" y="-17.78"/>
+</elements>
+<signals>
+<signal name="V_BATT+">
+<contactref element="U$1" pad="+1"/>
+<contactref element="BAT" pad="1"/>
+<contactref element="BAT" pad="2"/>
+<contactref element="D1" pad="A"/>
+<contactref element="U2" pad="9"/>
+<contactref element="C3" pad="1"/>
+<contactref element="R1" pad="1"/>
+<wire x1="-122.82" y1="-7.62" x2="-126.63" y2="-7.62" width="0" layer="19" extent="1-1"/>
+<wire x1="-117.72" y1="-2.54" x2="-122.82" y2="-7.62" width="0" layer="19" extent="1-1"/>
+<wire x1="-110.49" y1="2.8575" x2="-117.72" y2="-2.54" width="0" layer="19" extent="1-1"/>
+<wire x1="-107.95" y1="2.8575" x2="-110.49" y2="2.8575" width="0" layer="19" extent="1-1"/>
+<wire x1="-93.65488125" y1="5.8547" x2="-107.95" y2="2.8575" width="0" layer="19" extent="1-1"/>
+<wire x1="-88.265" y1="29.972" x2="-93.65488125" y2="5.8547" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$1">
+<contactref element="U$1" pad="-1"/>
+<contactref element="U$1" pad="+2"/>
+<wire x1="-15.875" y1="29.972" x2="-88.265" y2="10.668" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="GND">
+<contactref element="BAT" pad="4"/>
+<contactref element="BAT" pad="3"/>
+<contactref element="CHRG" pad="4"/>
+<contactref element="CHRG" pad="3"/>
+<contactref element="U2" pad="GND"/>
+<contactref element="C3" pad="2"/>
+<contactref element="JP1" pad="1"/>
+<contactref element="C1" pad="2"/>
+<contactref element="U$1" pad="-2"/>
+<contactref element="C4" pad="1"/>
+<contactref element="D2" pad="A"/>
+<wire x1="-130.44" y1="-12.7" x2="-129.15" y2="-17.78" width="0" layer="19" extent="1-1"/>
+<wire x1="-124.46" y1="-13.97" x2="-129.15" y2="-17.78" width="0" layer="19" extent="1-1"/>
+<wire x1="-121.02" y1="-7.62" x2="-124.46" y2="-13.97" width="0" layer="19" extent="1-1"/>
+<wire x1="-113.4" y1="2.54" x2="-121.02" y2="-7.62" width="0" layer="19" extent="1-1"/>
+<wire x1="-110.49" y1="7.3025" x2="-113.4" y2="2.54" width="0" layer="19" extent="1-1"/>
+<wire x1="-107.95" y1="7.3025" x2="-110.49" y2="7.3025" width="0" layer="19" extent="1-1"/>
+<wire x1="-102.87" y1="7.3025" x2="-107.95" y2="7.3025" width="0" layer="19" extent="1-1"/>
+<wire x1="-100.33" y1="7.3025" x2="-102.87" y2="7.3025" width="0" layer="19" extent="1-1"/>
+<wire x1="-93.98" y1="3.81" x2="-100.33" y2="7.3025" width="0" layer="19" extent="1-1"/>
+<wire x1="-15.875" y1="10.668" x2="-93.98" y2="3.81" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="VIN">
+<contactref element="CHRG" pad="1"/>
+<contactref element="CHRG" pad="2"/>
+<contactref element="U2" pad="3"/>
+<contactref element="U2" pad="1"/>
+<contactref element="U2" pad="2"/>
+<contactref element="C1" pad="1"/>
+<wire x1="-102.87" y1="2.8575" x2="-115.2" y2="2.54" width="0" layer="19" extent="1-1"/>
+<wire x1="-100.33" y1="2.8575" x2="-102.87" y2="2.8575" width="0" layer="19" extent="1-1"/>
+<wire x1="-95.6056" y1="1.7653" x2="-100.33" y2="2.8575" width="0" layer="19" extent="1-1"/>
+<wire x1="-94.955359375" y1="1.7653" x2="-95.6056" y2="1.7653" width="0" layer="19" extent="1-1"/>
+<wire x1="-94.30511875" y1="1.7653" x2="-94.955359375" y2="1.7653" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$6">
+<contactref element="C2" pad="2"/>
+<contactref element="U2" pad="12"/>
+<contactref element="L1" pad="2"/>
+<contactref element="D2" pad="C"/>
+<wire x1="-113.92" y1="-7.62" x2="-124.85" y2="-17.78" width="0" layer="19" extent="1-1"/>
+<wire x1="-117.21" y1="2.54" x2="-113.92" y2="-7.62" width="0" layer="19" extent="1-1"/>
+<wire x1="-95.6056" y1="5.8547" x2="-117.21" y2="2.54" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$2">
+<contactref element="U2" pad="11"/>
+<contactref element="C2" pad="1"/>
+<contactref element="D1" pad="C"/>
+<wire x1="-113.42" y1="-2.54" x2="-119.01" y2="2.54" width="0" layer="19" extent="1-1"/>
+<wire x1="-94.955359375" y1="5.8547" x2="-113.42" y2="-2.54" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$7">
+<contactref element="U2" pad="10"/>
+<contactref element="L1" pad="1"/>
+<contactref element="R1" pad="2"/>
+<wire x1="-117.22" y1="-7.62" x2="-124.83" y2="-7.62" width="0" layer="19" extent="1-1"/>
+<wire x1="-94.30511875" y1="5.8547" x2="-117.22" y2="-7.62" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$3">
+<contactref element="U2" pad="8"/>
+<contactref element="JP1" pad="2"/>
+<wire x1="-93.004640625" y1="5.8547" x2="-121.92" y2="-13.97" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$4">
+<contactref element="C4" pad="2"/>
+<contactref element="U2" pad="6"/>
+<wire x1="-92.3544" y1="1.7653" x2="-128.64" y2="-12.7" width="0" layer="19" extent="1-1"/>
+</signal>
+</signals>
+</board>
+</drawing>
+</eagle>
diff --git a/batboard/batboard.sch b/batboard/batboard.sch
new file mode 100644
index 0000000..2239b2f
--- /dev/null
+++ b/batboard/batboard.sch
@@ -0,0 +1,2073 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="6.3">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
+<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
+<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
+<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
+<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="no"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="no"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="no"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
+<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
+<layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
+<layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
+<layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
+<layer number="101" name="Patch_Top" color="12" fill="4" visible="no" active="yes"/>
+<layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
+<layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
+<layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
+<layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
+<layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
+<layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
+<layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
+<layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
+<layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
+<layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
+<layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
+<layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
+<layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
+<layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
+<layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
+<layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
+<layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
+<layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
+<layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
+<layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
+<layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
+<layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
+<layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
+<layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
+<layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
+<layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
+<layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
+<layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
+<layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
+<layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
+<layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
+<layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
+<layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
+</layers>
+<schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
+<libraries>
+<library name="jabinder">
+<packages>
+<package name="18650-PC4">
+<pad name="+1" x="-36.195" y="9.652" drill="1.524"/>
+<pad name="-1" x="36.195" y="9.652" drill="1.524"/>
+<pad name="-2" x="36.195" y="-9.652" drill="1.524"/>
+<pad name="+2" x="-36.195" y="-9.652" drill="1.524"/>
+<wire x1="-38.862" y1="20.066" x2="-38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="38.862" y1="20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="20.066" x2="38.862" y2="20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="-20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<hole x="-27.813" y="9.652" drill="3.2004"/>
+<hole x="-27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="9.652" drill="3.2004"/>
+<text x="-34.29" y="8.382" size="2.54" layer="21">+</text>
+<text x="-34.29" y="-10.922" size="2.54" layer="21">+</text>
+<text x="33.02" y="8.128" size="2.54" layer="21">-</text>
+<text x="33.02" y="-10.922" size="2.54" layer="21">-</text>
+</package>
+<package name="12-MSOP">
+<smd name="12" x="-1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="11" x="-0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="10" x="-0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="9" x="0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="8" x="0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="7" x="1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="1" x="-1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="2" x="-0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="3" x="-0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="4" x="0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="5" x="0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="6" x="1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="GND" x="0" y="0" dx="2.8448" dy="1.651" layer="1"/>
+<wire x1="2.0193" y1="1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="-2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="2.0193" y2="1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="-1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<text x="-1.98881875" y="-1.0414" size="1.27" layer="21">.</text>
+<text x="-2.54" y="-2.54" size="1.016" layer="21">1</text>
+</package>
+<package name="4HEAD_MOLEX_C71308">
+<smd name="4" x="-1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="3" x="1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="1" x="-1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="2" x="1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<wire x1="-2.54" y1="3.81" x2="-2.54" y2="-3.81" width="0.127" layer="21"/>
+<wire x1="2.54" y1="3.81" x2="2.54" y2="-3.81" width="0.127" layer="21"/>
+<text x="-2.54" y="-3.81" size="1.27" layer="21">.</text>
+<text x="4.064" y="-2.54" size="1.27" layer="25" rot="R90">&gt;Name</text>
+</package>
+</packages>
+<symbols>
+<symbol name="2CELLBATT">
+<wire x1="-10.16" y1="0" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="-2.54" x2="-2.54" y2="-2.54" width="0.254" layer="94"/>
+<wire x1="2.54" y1="0" x2="12.7" y2="0" width="0.254" layer="94"/>
+<wire x1="5.08" y1="-2.54" x2="10.16" y2="-2.54" width="0.254" layer="94"/>
+<pin name="-2" x="7.62" y="-7.62" visible="off" length="middle" rot="R90"/>
+<pin name="+1" x="-5.08" y="5.08" visible="off" length="middle" rot="R270"/>
+<pin name="-1" x="-5.08" y="-7.62" visible="off" length="middle" rot="R90"/>
+<pin name="+2" x="7.62" y="5.08" visible="off" length="middle" rot="R270"/>
+</symbol>
+<symbol name="LT3650">
+<wire x1="-10.16" y1="12.7" x2="-10.16" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-10.16" y1="-22.86" x2="10.16" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="10.16" y1="-22.86" x2="10.16" y2="12.7" width="0.254" layer="94"/>
+<wire x1="10.16" y1="12.7" x2="-10.16" y2="12.7" width="0.254" layer="94"/>
+<pin name="VIN" x="-15.24" y="10.16" visible="pin" length="middle"/>
+<pin name="CLP" x="-15.24" y="5.08" visible="pin" length="middle"/>
+<pin name="!SHDN" x="-15.24" y="0" visible="pin" length="middle"/>
+<pin name="!CHRG" x="-15.24" y="-5.08" visible="pin" length="middle"/>
+<pin name="!FAULT" x="-15.24" y="-10.16" visible="pin" length="middle"/>
+<pin name="TIMER" x="-15.24" y="-15.24" visible="pin" length="middle"/>
+<pin name="RNG/SS" x="15.24" y="-15.24" visible="pin" length="middle" rot="R180"/>
+<pin name="NTC" x="15.24" y="-10.16" visible="pin" length="middle" rot="R180"/>
+<pin name="BAT" x="15.24" y="-5.08" visible="pin" length="middle" rot="R180"/>
+<pin name="SENSE" x="15.24" y="0" visible="pin" length="middle" rot="R180"/>
+<pin name="BOOST" x="15.24" y="5.08" visible="pin" length="middle" rot="R180"/>
+<pin name="SW" x="15.24" y="10.16" visible="pin" length="middle" rot="R180"/>
+<pin name="GND" x="-15.24" y="-20.32" visible="pin" length="middle"/>
+<text x="2.54" y="-25.4" size="1.778" layer="95">&gt;Name</text>
+</symbol>
+<symbol name="SMT_HEADER_4">
+<pin name="1" x="-7.62" y="2.54" visible="off" length="short"/>
+<pin name="2" x="-7.62" y="-2.54" visible="off" length="short"/>
+<pin name="4" x="5.08" y="2.54" visible="off" length="short" rot="R180"/>
+<pin name="3" x="5.08" y="-2.54" visible="off" length="short" rot="R180"/>
+<wire x1="-5.08" y1="5.08" x2="-5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-5.08" x2="2.54" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-5.08" x2="2.54" y2="5.08" width="0.254" layer="94"/>
+<wire x1="2.54" y1="5.08" x2="-5.08" y2="5.08" width="0.254" layer="94"/>
+<text x="-4.318" y="2.286" size="1.778" layer="97">1</text>
+<text x="-4.318" y="-3.302" size="1.778" layer="97">2</text>
+<text x="0.508" y="-3.302" size="1.778" layer="97">3</text>
+<text x="0.508" y="2.286" size="1.778" layer="97">4</text>
+<text x="-5.08" y="-7.62" size="1.778" layer="97">&gt;Name</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="BK-18650-PC4">
+<gates>
+<gate name="G$1" symbol="2CELLBATT" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="18650-PC4">
+<connects>
+<connect gate="G$1" pin="+1" pad="+1"/>
+<connect gate="G$1" pin="+2" pad="+2"/>
+<connect gate="G$1" pin="-1" pad="-1"/>
+<connect gate="G$1" pin="-2" pad="-2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="LT3650">
+<description>A monolithic two cell lithium ion charger.</description>
+<gates>
+<gate name="G$1" symbol="LT3650" x="0" y="5.08"/>
+</gates>
+<devices>
+<device name="" package="12-MSOP">
+<connects>
+<connect gate="G$1" pin="!CHRG" pad="4"/>
+<connect gate="G$1" pin="!FAULT" pad="5"/>
+<connect gate="G$1" pin="!SHDN" pad="3"/>
+<connect gate="G$1" pin="BAT" pad="9"/>
+<connect gate="G$1" pin="BOOST" pad="11"/>
+<connect gate="G$1" pin="CLP" pad="2"/>
+<connect gate="G$1" pin="GND" pad="GND"/>
+<connect gate="G$1" pin="NTC" pad="8"/>
+<connect gate="G$1" pin="RNG/SS" pad="7"/>
+<connect gate="G$1" pin="SENSE" pad="10"/>
+<connect gate="G$1" pin="SW" pad="12"/>
+<connect gate="G$1" pin="TIMER" pad="6"/>
+<connect gate="G$1" pin="VIN" pad="1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="C-GRID-71308">
+<description>4 Pin SMT Molex HEADER
+Digikey: WM17450-ND</description>
+<gates>
+<gate name="G$1" symbol="SMT_HEADER_4" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="4HEAD_MOLEX_C71308">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="supply1">
+<description>&lt;b&gt;Supply Symbols&lt;/b&gt;&lt;p&gt;
+ GND, VCC, 0V, +5V, -5V, etc.&lt;p&gt;
+ Please keep in mind, that these devices are necessary for the
+ automatic wiring of the supply signals.&lt;p&gt;
+ The pin name defined in the symbol is identical to the net which is to be wired automatically.&lt;p&gt;
+ In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.&lt;p&gt;
+ &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+</packages>
+<symbols>
+<symbol name="GND">
+<wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
+<text x="-2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
+<pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="GND" prefix="GND">
+<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
+<gates>
+<gate name="1" symbol="GND" x="0" y="0"/>
+</gates>
+<devices>
+<device name="">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="SparkFun-Capacitors">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="CAP-PTH-SMALL">
+<wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="0.7" diameter="1.651"/>
+<pad name="2" x="2.54" y="0" drill="0.7" diameter="1.651"/>
+<text x="0.508" y="1.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="0.254" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
+</package>
+<package name="CAP-PTH-SMALL2">
+<wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="1.27" x2="3.81" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="1.27" x2="3.81" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-1.27" x2="-1.27" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-1.27" x2="-1.27" y2="1.27" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="0.7" diameter="1.651"/>
+<pad name="2" x="2.54" y="0" drill="0.7" diameter="1.651"/>
+<text x="-1.27" y="1.905" size="0.6096" layer="25">&gt;Name</text>
+<text x="-1.27" y="-2.54" size="0.6096" layer="27">&gt;Value</text>
+</package>
+<package name="0805">
+<wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
+<wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
+<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="CAP-PTH-LARGE">
+<wire x1="0" y1="0.635" x2="0" y2="0" width="0.2032" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="0" y1="0" x2="-2.54" y2="0" width="0.2032" layer="21"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.2032" layer="21"/>
+<pad name="1" x="-4.826" y="0" drill="0.9" diameter="1.905"/>
+<pad name="2" x="4.572" y="0" drill="0.9" diameter="1.905"/>
+<text x="-0.762" y="1.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.016" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
+</package>
+<package name="GRM43D">
+<wire x1="2.25" y1="1.6" x2="1.1" y2="1.6" width="0.127" layer="51"/>
+<wire x1="1.1" y1="1.6" x2="-1.1" y2="1.6" width="0.127" layer="51"/>
+<wire x1="-1.1" y1="1.6" x2="-2.25" y2="1.6" width="0.127" layer="51"/>
+<wire x1="-2.25" y1="1.6" x2="-2.25" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="-2.25" y1="-1.6" x2="-1.1" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="-1.1" y1="-1.6" x2="1.1" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="1.1" y1="-1.6" x2="2.25" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="2.25" y1="-1.6" x2="2.25" y2="1.6" width="0.127" layer="51"/>
+<wire x1="1.1" y1="1.6" x2="1.1" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="-1.1" y1="1.6" x2="-1.1" y2="-1.6" width="0.127" layer="51"/>
+<wire x1="-2.3" y1="1.8" x2="2.3" y2="1.8" width="0.127" layer="21"/>
+<wire x1="-2.3" y1="-1.8" x2="2.3" y2="-1.8" width="0.127" layer="21"/>
+<smd name="A" x="1.927" y="0" dx="3.2" dy="1.65" layer="1" rot="R90"/>
+<smd name="C" x="-1.927" y="0" dx="3.2" dy="1.65" layer="1" rot="R90"/>
+<text x="-2" y="2" size="0.4064" layer="25">&gt;NAME</text>
+<text x="0" y="-2" size="0.4064" layer="27" rot="R180">&gt;VALUE</text>
+<rectangle x1="-2.2" y1="-1.6" x2="-1.1" y2="1.6" layer="51"/>
+<rectangle x1="1.1" y1="-1.6" x2="2.2" y2="1.6" layer="51"/>
+</package>
+<package name="0603-CAP">
+<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
+<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
+<wire x1="0" y1="0.0305" x2="0" y2="-0.0305" width="0.5588" layer="21"/>
+<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
+<text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
+<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
+<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+</package>
+<package name="0402-CAP">
+<description>&lt;b&gt;CAPACITOR&lt;/b&gt;&lt;p&gt;
+chip</description>
+<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
+<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
+<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="0" y1="0.0305" x2="0" y2="-0.0305" width="0.4064" layer="21"/>
+<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<text x="-0.889" y="0.6985" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.0795" y="-1.143" size="0.4064" layer="27">&gt;VALUE</text>
+<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
+<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+</package>
+<package name="CAP-PTH-5MM">
+<wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="-2.5" y="0" drill="0.7" diameter="1.651"/>
+<pad name="2" x="2.5" y="0" drill="0.7" diameter="1.651"/>
+<text x="-0.762" y="1.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.016" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
+</package>
+<package name="AXIAL-5MM">
+<wire x1="-1.14" y1="0.762" x2="1.14" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="1.14" y1="0.762" x2="1.14" y2="0" width="0.2032" layer="21"/>
+<wire x1="1.14" y1="0" x2="1.14" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="1.14" y1="-0.762" x2="-1.14" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="-1.14" y1="-0.762" x2="-1.14" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.14" y1="0" x2="-1.14" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="1.14" y1="0" x2="1.394" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.14" y1="0" x2="-1.394" y2="0" width="0.2032" layer="21"/>
+<pad name="P$1" x="-2.5" y="0" drill="0.9" diameter="1.8796"/>
+<pad name="P$2" x="2.5" y="0" drill="0.9" diameter="1.8796"/>
+<text x="-2.54" y="1.17" size="0.4" layer="25">&gt;Name</text>
+<text x="-1.032" y="-0.208" size="0.4" layer="21" ratio="15">&gt;Value</text>
+</package>
+<package name="1210">
+<wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.127" layer="51"/>
+<wire x1="1.6" y1="1.3" x2="1.6" y2="-1.3" width="0.127" layer="51"/>
+<wire x1="1.6" y1="-1.3" x2="-1.6" y2="-1.3" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="-1.3" x2="-1.6" y2="1.3" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.2032" layer="21"/>
+<wire x1="-1.6" y1="-1.3" x2="1.6" y2="-1.3" width="0.2032" layer="21"/>
+<smd name="1" x="-1.6" y="0" dx="1.2" dy="2" layer="1"/>
+<smd name="2" x="1.6" y="0" dx="1.2" dy="2" layer="1"/>
+<text x="-0.8" y="0.5" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-0.9" y="-0.7" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1206">
+<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
+<wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
+<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<text x="-1.27" y="1.143" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.397" y="-1.524" size="0.4064" layer="27">&gt;VALUE</text>
+<rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
+<rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
+</package>
+<package name="CTZ3">
+<description>CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF</description>
+<wire x1="-1.6" y1="1.4" x2="-1.6" y2="-2.25" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="-2.25" x2="1.6" y2="-2.25" width="0.127" layer="51"/>
+<wire x1="1.6" y1="1.4" x2="1.6" y2="-2.25" width="0.127" layer="51"/>
+<wire x1="-0.5" y1="0" x2="0.5" y2="0" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="1.4" x2="-1" y2="2.2" width="0.127" layer="51"/>
+<wire x1="1.6" y1="1.4" x2="1" y2="2.2" width="0.127" layer="51"/>
+<wire x1="-1" y1="2.2" x2="1" y2="2.2" width="0.127" layer="51"/>
+<wire x1="0" y1="0.8" x2="0" y2="-0.8" width="0.127" layer="51"/>
+<wire x1="-0.8" y1="0" x2="0.8" y2="0" width="0.127" layer="51"/>
+<wire x1="-1.05" y1="2.25" x2="-1.7" y2="1.45" width="0.127" layer="21"/>
+<wire x1="-1.7" y1="1.45" x2="-1.7" y2="-2.35" width="0.127" layer="21"/>
+<wire x1="-1.7" y1="-2.35" x2="-1.05" y2="-2.35" width="0.127" layer="21"/>
+<wire x1="1.05" y1="2.25" x2="1.7" y2="1.4" width="0.127" layer="21"/>
+<wire x1="1.7" y1="1.4" x2="1.7" y2="-2.35" width="0.127" layer="21"/>
+<wire x1="1.7" y1="-2.35" x2="1.05" y2="-2.35" width="0.127" layer="21"/>
+<smd name="+" x="0" y="2.05" dx="1.5" dy="1.2" layer="1"/>
+<smd name="-" x="0" y="-2.05" dx="1.5" dy="1.2" layer="1"/>
+<text x="-2" y="3" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-2" y="-3.4" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="CAP-PTH-SMALL-KIT">
+<description>&lt;h3&gt;CAP-PTH-SMALL-KIT&lt;/h3&gt;
+Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).&lt;br&gt;
+&lt;br&gt;
+&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
+<wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.254" layer="21"/>
+<wire x1="-2.667" y1="1.27" x2="2.667" y2="1.27" width="0.254" layer="21"/>
+<wire x1="2.667" y1="1.27" x2="2.667" y2="-1.27" width="0.254" layer="21"/>
+<wire x1="2.667" y1="-1.27" x2="-2.667" y2="-1.27" width="0.254" layer="21"/>
+<wire x1="-2.667" y1="-1.27" x2="-2.667" y2="1.27" width="0.254" layer="21"/>
+<pad name="1" x="-1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
+<pad name="2" x="1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
+<polygon width="0.127" layer="30">
+<vertex x="-1.4021" y="-0.9475" curve="-90"/>
+<vertex x="-2.357" y="-0.0178" curve="-90.011749"/>
+<vertex x="-1.4046" y="0.9576" curve="-90"/>
+<vertex x="-0.4546" y="-0.0204" curve="-90.024193"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="-1.4046" y="-0.4395" curve="-90.012891"/>
+<vertex x="-1.8491" y="-0.0153" curve="-90"/>
+<vertex x="-1.4046" y="0.452" curve="-90"/>
+<vertex x="-0.9627" y="-0.0051" curve="-90.012967"/>
+</polygon>
+<polygon width="0.127" layer="30">
+<vertex x="1.397" y="-0.9475" curve="-90"/>
+<vertex x="0.4421" y="-0.0178" curve="-90.011749"/>
+<vertex x="1.3945" y="0.9576" curve="-90"/>
+<vertex x="2.3445" y="-0.0204" curve="-90.024193"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="1.3945" y="-0.4395" curve="-90.012891"/>
+<vertex x="0.95" y="-0.0153" curve="-90"/>
+<vertex x="1.3945" y="0.452" curve="-90"/>
+<vertex x="1.8364" y="-0.0051" curve="-90.012967"/>
+</polygon>
+</package>
+<package name="CAP-PTH-SMALLEZ">
+<description>This is the "EZ" version of the .1" spaced ceramic thru-hole cap.&lt;br&gt;
+It has reduced top mask to make it harder to put the component on the wrong side of the board.</description>
+<wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="1.27" x2="3.81" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="1.27" x2="3.81" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-1.27" x2="-1.27" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-1.27" x2="-1.27" y2="1.27" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="0.7" diameter="1.651" stop="no"/>
+<pad name="2" x="2.54" y="0" drill="0.7" diameter="1.651" stop="no"/>
+<text x="-1.27" y="1.905" size="0.6096" layer="25">&gt;Name</text>
+<text x="-1.27" y="-2.54" size="0.6096" layer="27">&gt;Value</text>
+<circle x="0" y="0" radius="0.898025" width="0" layer="30"/>
+<circle x="2.54" y="0" radius="0.915809375" width="0" layer="30"/>
+<circle x="0" y="0" radius="0.40160625" width="0" layer="29"/>
+<circle x="2.54" y="0" radius="0.40160625" width="0" layer="29"/>
+</package>
+</packages>
+<symbols>
+<symbol name="CAP">
+<wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
+<wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
+<text x="1.524" y="2.921" size="1.778" layer="95">&gt;NAME</text>
+<text x="1.524" y="-2.159" size="1.778" layer="96">&gt;VALUE</text>
+<rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
+<rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
+<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
+<pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="CAP" prefix="C" uservalue="yes">
+<description>&lt;b&gt;Capacitor&lt;/b&gt;
+Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.</description>
+<gates>
+<gate name="G$1" symbol="CAP" x="0" y="0"/>
+</gates>
+<devices>
+<device name="PTH" package="CAP-PTH-SMALL">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH2" package="CAP-PTH-SMALL2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0805" package="0805">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH3" package="CAP-PTH-LARGE">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SMD" package="GRM43D">
+<connects>
+<connect gate="G$1" pin="1" pad="A"/>
+<connect gate="G$1" pin="2" pad="C"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0603-CAP" package="0603-CAP">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0402-CAP" package="0402-CAP">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH1" package="CAP-PTH-5MM">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_" package="AXIAL-5MM">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1210" package="1210">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1206" package="1206">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="ASMD" package="CTZ3">
+<connects>
+<connect gate="G$1" pin="1" pad="+"/>
+<connect gate="G$1" pin="2" pad="-"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="KIT" package="CAP-PTH-SMALL-KIT">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="EZ" package="CAP-PTH-SMALLEZ">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="SparkFun-DiscreteSemi">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="SMA-DIODE">
+<description>&lt;B&gt;Diode&lt;/B&gt;&lt;p&gt;
+Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140</description>
+<wire x1="-2.3" y1="1" x2="-2.3" y2="1.45" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="1.45" x2="2.3" y2="1.45" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="1.45" x2="2.3" y2="1" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="-1" x2="2.3" y2="-1.45" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="-1.45" x2="-2.3" y2="-1.45" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.45" x2="-2.3" y2="-1" width="0.2032" layer="21"/>
+<wire x1="1" y1="1" x2="1" y2="-1" width="0.2032" layer="21"/>
+<smd name="A" x="-2.15" y="0" dx="1.27" dy="1.47" layer="1" rot="R180"/>
+<smd name="C" x="2.15" y="0" dx="1.27" dy="1.47" layer="1"/>
+<text x="-2.286" y="1.651" size="0.4064" layer="25">&gt;NAME</text>
+<text x="0.254" y="1.651" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="SOD-523">
+<smd name="C" x="0.55" y="0" dx="0.8" dy="0.6" layer="1"/>
+<smd name="A" x="-0.55" y="0" dx="0.8" dy="0.6" layer="1"/>
+<wire x1="-0.6" y1="-0.4" x2="0.4" y2="-0.4" width="0.127" layer="21"/>
+<wire x1="0.4" y1="-0.4" x2="0.6" y2="-0.4" width="0.127" layer="21"/>
+<wire x1="0.6" y1="0.4" x2="0.4" y2="0.4" width="0.127" layer="21"/>
+<wire x1="0.4" y1="0.4" x2="-0.6" y2="0.4" width="0.127" layer="21"/>
+<wire x1="0.6" y1="0.4" x2="0.4" y2="0.6" width="0.127" layer="21"/>
+<wire x1="0.6" y1="-0.4" x2="0.4" y2="-0.6" width="0.127" layer="21"/>
+<wire x1="0.4" y1="-0.6" x2="0.4" y2="-0.4" width="0.127" layer="21"/>
+<wire x1="0.4" y1="0.6" x2="0.4" y2="0.4" width="0.127" layer="21"/>
+</package>
+</packages>
+<symbols>
+<symbol name="DIODE-SCHOTTKY">
+<wire x1="-1.27" y1="-1.27" x2="1.27" y2="0" width="0.254" layer="94"/>
+<wire x1="1.27" y1="0" x2="-1.27" y2="1.27" width="0.254" layer="94"/>
+<wire x1="1.27" y1="1.27" x2="1.27" y2="0" width="0.254" layer="94"/>
+<wire x1="-1.27" y1="1.27" x2="-1.27" y2="-1.27" width="0.254" layer="94"/>
+<wire x1="1.27" y1="0" x2="1.27" y2="-1.27" width="0.254" layer="94"/>
+<wire x1="1.27" y1="1.27" x2="1.778" y2="1.524" width="0.254" layer="94"/>
+<wire x1="1.27" y1="-1.27" x2="0.762" y2="-1.524" width="0.254" layer="94"/>
+<text x="2.54" y="0.4826" size="1.778" layer="95">&gt;NAME</text>
+<text x="2.54" y="-2.3114" size="1.778" layer="96">&gt;VALUE</text>
+<pin name="A" x="-2.54" y="0" visible="off" length="short" direction="pas"/>
+<pin name="C" x="2.54" y="0" visible="off" length="short" direction="pas" rot="R180"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="DIODE-SCHOTTKY" prefix="D">
+<description>Commonly MBRA140.</description>
+<gates>
+<gate name="G$1" symbol="DIODE-SCHOTTKY" x="0" y="0"/>
+</gates>
+<devices>
+<device name="_" package="SMA-DIODE">
+<connects>
+<connect gate="G$1" pin="A" pad="A"/>
+<connect gate="G$1" pin="C" pad="C"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="" package="SOD-523">
+<connects>
+<connect gate="G$1" pin="A" pad="A"/>
+<connect gate="G$1" pin="C" pad="C"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="inductor-neosid">
+<description>&lt;b&gt;Neosid Chokes and Transformers&lt;/b&gt;&lt;p&gt;
+
+Based on the following sources:
+&lt;ul&gt;
+&lt;li&gt;Electronic Component Book, Part 2 : Chokes, Fixed Value Inductors
+&lt;li&gt;Part 3 : Filters, Coil Assemblies, Thermoplastic Parts
+&lt;li&gt;Part 4 : SMD Filters, Coils, Fixed Value Inductors
+&lt;li&gt;www.neosid.de
+&lt;/ul&gt;
+ &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="SM-1206">
+<description>SMD CHIP &lt;B&gt;INDUCTOR&lt;/B&gt;&lt;p&gt;
+body 1206</description>
+<wire x1="1.3" y1="0.7" x2="1.3" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="0.6" x2="1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="-0.6" x2="1.3" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="-0.7" x2="2.1" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="2.1" y1="-0.7" x2="2.1" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="2.1" y1="0.7" x2="1.3" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-2.1" y1="0.7" x2="-2.1" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="-2.1" y1="-0.7" x2="-1.3" y2="-0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.7" x2="-1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.6" x2="-1.3" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="0.6" x2="-1.3" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="0.7" x2="-2.1" y2="0.7" width="0.2032" layer="51"/>
+<wire x1="-1.3" y1="-0.6" x2="-0.9" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="-0.9" y1="-0.6" x2="0.9" y2="-0.6" width="0.2032" layer="21"/>
+<wire x1="0.9" y1="-0.6" x2="1.3" y2="-0.6" width="0.2032" layer="51"/>
+<wire x1="1.3" y1="0.6" x2="0.9" y2="0.6" width="0.2032" layer="51"/>
+<wire x1="0.9" y1="0.6" x2="-0.9" y2="0.6" width="0.2032" layer="21"/>
+<wire x1="-0.9" y1="0.6" x2="-1.3" y2="0.6" width="0.2032" layer="51"/>
+<smd name="1" x="-1.65" y="0" dx="1.2" dy="1.8" layer="1"/>
+<smd name="2" x="1.65" y="0" dx="1.2" dy="1.8" layer="1"/>
+<text x="-2.143" y="0.997" size="1.27" layer="25">&gt;NAME</text>
+<text x="-2.208" y="-2.308" size="1.27" layer="27">&gt;VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="L">
+<text x="-3.81" y="1.778" size="1.778" layer="95">&gt;NAME</text>
+<text x="-3.81" y="-3.556" size="1.778" layer="96">&gt;VALUE</text>
+<rectangle x1="-3.81" y1="-1.27" x2="3.81" y2="1.27" layer="94"/>
+<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
+<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="SM-1206" prefix="L" uservalue="yes">
+<description>&lt;b&gt;INDUCTOR&lt;/b&gt;&lt;p&gt;
+SMD chip inductor</description>
+<gates>
+<gate name="G$1" symbol="L" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="SM-1206">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="MF" value="" constant="no"/>
+<attribute name="MPN" value="" constant="no"/>
+<attribute name="OC_FARNELL" value="unknown" constant="no"/>
+<attribute name="OC_NEWARK" value="unknown" constant="no"/>
+</technology>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="SparkFun-Passives">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="1206">
+<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
+<wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
+<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<text x="-1.27" y="1.143" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.397" y="-1.524" size="0.4064" layer="27">&gt;VALUE</text>
+<rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
+<rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
+</package>
+<package name="AXIAL-0.3">
+<wire x1="-2.54" y1="0.762" x2="2.54" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0.762" x2="2.54" y2="0" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="-0.762" x2="-2.54" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="-0.762" x2="-2.54" y2="0" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.54" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.2032" layer="21"/>
+<pad name="P$1" x="-3.81" y="0" drill="0.9" diameter="1.8796"/>
+<pad name="P$2" x="3.81" y="0" drill="0.9" diameter="1.8796"/>
+<text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
+<text x="-2.032" y="-0.381" size="1.016" layer="21" font="vector" ratio="15">&gt;Value</text>
+</package>
+<package name="R2010">
+<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
+chip</description>
+<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
+<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
+<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
+<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
+<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
+<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
+<wire x1="-1.027" y1="1.245" x2="1.027" y2="1.245" width="0.1524" layer="21"/>
+<wire x1="-1.002" y1="-1.245" x2="1.016" y2="-1.245" width="0.1524" layer="21"/>
+<smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
+<smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
+<text x="-2.54" y="1.5875" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-2.54" y="-2.032" size="0.4064" layer="27">&gt;VALUE</text>
+<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
+<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
+</package>
+<package name="0805">
+<wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
+<wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
+<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
+<text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="0603-RES">
+<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
+<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
+<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
+<text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
+<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
+<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
+</package>
+<package name="0402-RES">
+<description>&lt;b&gt;CAPACITOR&lt;/b&gt;&lt;p&gt;
+chip</description>
+<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
+<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
+<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
+<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<text x="-0.889" y="0.6985" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.0795" y="-1.143" size="0.4064" layer="27">&gt;VALUE</text>
+<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
+<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/>
+</package>
+<package name="1/6W-RES">
+<description>1/6W Thru-hole Resistor - *UNPROVEN*</description>
+<wire x1="-1.55" y1="0.85" x2="-1.55" y2="-0.85" width="0.2032" layer="21"/>
+<wire x1="-1.55" y1="-0.85" x2="1.55" y2="-0.85" width="0.2032" layer="21"/>
+<wire x1="1.55" y1="-0.85" x2="1.55" y2="0.85" width="0.2032" layer="21"/>
+<wire x1="1.55" y1="0.85" x2="-1.55" y2="0.85" width="0.2032" layer="21"/>
+<pad name="1" x="-2.5" y="0" drill="0.762"/>
+<pad name="2" x="2.5" y="0" drill="0.762"/>
+<text x="-1.2662" y="0.9552" size="0.6096" layer="25">&gt;NAME</text>
+<text x="-1.423" y="-0.4286" size="0.8128" layer="21" ratio="15">&gt;VALUE</text>
+</package>
+<package name="R2512">
+<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
+<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
+<smd name="1" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
+<smd name="2" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
+<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
+<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
+<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
+</package>
+<package name="AXIAL-0.4">
+<description>1/4W Resistor, 0.4" wide&lt;p&gt;
+
+Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
+<wire x1="-3.15" y1="-1.2" x2="-3.15" y2="1.2" width="0.2032" layer="21"/>
+<wire x1="-3.15" y1="1.2" x2="3.15" y2="1.2" width="0.2032" layer="21"/>
+<wire x1="3.15" y1="1.2" x2="3.15" y2="-1.2" width="0.2032" layer="21"/>
+<wire x1="3.15" y1="-1.2" x2="-3.15" y2="-1.2" width="0.2032" layer="21"/>
+<pad name="P$1" x="-5.08" y="0" drill="0.9" diameter="1.8796"/>
+<pad name="P$2" x="5.08" y="0" drill="0.9" diameter="1.8796"/>
+<text x="-3.175" y="1.905" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
+<text x="-2.286" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
+</package>
+<package name="AXIAL-0.5">
+<description>1/2W Resistor, 0.5" wide&lt;p&gt;
+
+Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
+<wire x1="-4.5" y1="-1.65" x2="-4.5" y2="1.65" width="0.2032" layer="21"/>
+<wire x1="-4.5" y1="1.65" x2="4.5" y2="1.65" width="0.2032" layer="21"/>
+<wire x1="4.5" y1="1.65" x2="4.5" y2="-1.65" width="0.2032" layer="21"/>
+<wire x1="4.5" y1="-1.65" x2="-4.5" y2="-1.65" width="0.2032" layer="21"/>
+<pad name="P$1" x="-6.35" y="0" drill="0.9" diameter="1.8796"/>
+<pad name="P$2" x="6.35" y="0" drill="0.9" diameter="1.8796"/>
+<text x="-4.445" y="2.54" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
+<text x="-3.429" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
+</package>
+<package name="AXIAL-0.6">
+<description>1W Resistor, 0.6" wide&lt;p&gt;
+
+Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
+<wire x1="-5.75" y1="-2.25" x2="-5.75" y2="2.25" width="0.2032" layer="21"/>
+<wire x1="-5.75" y1="2.25" x2="5.75" y2="2.25" width="0.2032" layer="21"/>
+<wire x1="5.75" y1="2.25" x2="5.75" y2="-2.25" width="0.2032" layer="21"/>
+<wire x1="5.75" y1="-2.25" x2="-5.75" y2="-2.25" width="0.2032" layer="21"/>
+<pad name="P$1" x="-7.62" y="0" drill="1.2" diameter="1.8796"/>
+<pad name="P$2" x="7.62" y="0" drill="1.2" diameter="1.8796"/>
+<text x="-5.715" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
+<text x="-4.064" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
+</package>
+<package name="AXIAL-0.8">
+<description>2W Resistor, 0.8" wide&lt;p&gt;
+
+Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
+<wire x1="-7.75" y1="-2.5" x2="-7.75" y2="2.5" width="0.2032" layer="21"/>
+<wire x1="-7.75" y1="2.5" x2="7.75" y2="2.5" width="0.2032" layer="21"/>
+<wire x1="7.75" y1="2.5" x2="7.75" y2="-2.5" width="0.2032" layer="21"/>
+<wire x1="7.75" y1="-2.5" x2="-7.75" y2="-2.5" width="0.2032" layer="21"/>
+<pad name="P$1" x="-10.16" y="0" drill="1.2" diameter="1.8796"/>
+<pad name="P$2" x="10.16" y="0" drill="1.2" diameter="1.8796"/>
+<text x="-7.62" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
+<text x="-5.969" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
+</package>
+<package name="AXIAL-0.3-KIT">
+<description>&lt;h3&gt;AXIAL-0.3-KIT&lt;/h3&gt;
+
+Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.&lt;br&gt;
+&lt;br&gt;
+
+&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
+<wire x1="-2.54" y1="1.27" x2="2.54" y2="1.27" width="0.254" layer="21"/>
+<wire x1="2.54" y1="1.27" x2="2.54" y2="0" width="0.254" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="-1.27" width="0.254" layer="21"/>
+<wire x1="2.54" y1="-1.27" x2="-2.54" y2="-1.27" width="0.254" layer="21"/>
+<wire x1="-2.54" y1="-1.27" x2="-2.54" y2="0" width="0.254" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.54" y2="1.27" width="0.254" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.254" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.254" layer="21"/>
+<pad name="P$1" x="-3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
+<pad name="P$2" x="3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
+<text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
+<text x="-2.159" y="-0.762" size="1.27" layer="21" font="vector" ratio="15">&gt;Value</text>
+<polygon width="0.127" layer="30">
+<vertex x="3.8201" y="-0.9449" curve="-90"/>
+<vertex x="2.8652" y="-0.0152" curve="-90.011749"/>
+<vertex x="3.8176" y="0.9602" curve="-90"/>
+<vertex x="4.7676" y="-0.0178" curve="-90.024193"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="3.8176" y="-0.4369" curve="-90.012891"/>
+<vertex x="3.3731" y="-0.0127" curve="-90"/>
+<vertex x="3.8176" y="0.4546" curve="-90"/>
+<vertex x="4.2595" y="-0.0025" curve="-90.012967"/>
+</polygon>
+<polygon width="0.127" layer="30">
+<vertex x="-3.8075" y="-0.9525" curve="-90"/>
+<vertex x="-4.7624" y="-0.0228" curve="-90.011749"/>
+<vertex x="-3.81" y="0.9526" curve="-90"/>
+<vertex x="-2.86" y="-0.0254" curve="-90.024193"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="-3.81" y="-0.4445" curve="-90.012891"/>
+<vertex x="-4.2545" y="-0.0203" curve="-90"/>
+<vertex x="-3.81" y="0.447" curve="-90"/>
+<vertex x="-3.3681" y="-0.0101" curve="-90.012967"/>
+</polygon>
+</package>
+<package name="AXIAL-0.3EZ">
+<description>This is the "EZ" version of the standard .3" spaced resistor package.&lt;br&gt;
+It has a reduced top mask to make it harder to install upside-down.</description>
+<wire x1="-2.54" y1="0.762" x2="2.54" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0.762" x2="2.54" y2="0" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="-0.762" x2="-2.54" y2="-0.762" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="-0.762" x2="-2.54" y2="0" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.54" y2="0.762" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.2032" layer="21"/>
+<wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.2032" layer="21"/>
+<pad name="P$1" x="-3.81" y="0" drill="0.9" diameter="1.8796" stop="no"/>
+<pad name="P$2" x="3.81" y="0" drill="0.9" diameter="1.8796" stop="no"/>
+<text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
+<text x="-2.032" y="-0.381" size="1.016" layer="21" font="vector" ratio="15">&gt;Value</text>
+<circle x="-3.81" y="0" radius="0.508" width="0" layer="29"/>
+<circle x="3.81" y="0" radius="0.523634375" width="0" layer="29"/>
+<circle x="-3.81" y="0" radius="1.02390625" width="0" layer="30"/>
+<circle x="3.81" y="0" radius="1.04726875" width="0" layer="30"/>
+</package>
+</packages>
+<symbols>
+<symbol name="RESISTOR">
+<wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
+<text x="-3.81" y="1.4986" size="1.778" layer="95">&gt;NAME</text>
+<text x="-3.81" y="-3.302" size="1.778" layer="96">&gt;VALUE</text>
+<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="RESISTOR" prefix="R" uservalue="yes">
+<description>&lt;b&gt;Resistor&lt;/b&gt;
+Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description>
+<gates>
+<gate name="G$1" symbol="RESISTOR" x="0" y="0"/>
+</gates>
+<devices>
+<device name="1206" package="1206">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="AXIAL-0.3" package="AXIAL-0.3">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="2010" package="R2010">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0805-RES" package="0805">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0603-RES" package="0603-RES">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0402-RES" package="0402-RES">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH-1/6W" package="1/6W-RES">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="2512" package="R2512">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH-1/4W" package="AXIAL-0.4">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH-1/2W" package="AXIAL-0.5">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH-1W" package="AXIAL-0.6">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH-2W" package="AXIAL-0.8">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="KIT" package="AXIAL-0.3-KIT">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="EZ" package="AXIAL-0.3EZ">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="SparkFun-Connectors">
+<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
+In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
+We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
+&lt;br&gt;&lt;br&gt;
+&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
+<packages>
+<package name="1X02">
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="MOLEX-1X2">
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
+</package>
+<package name="SCREWTERMINAL-3.5MM-2">
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="JST-2-SMD">
+<description>2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.</description>
+<wire x1="-4" y1="-1" x2="-4" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="-4" y1="-4.5" x2="-3.2" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="-3.2" y1="-4.5" x2="-3.2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="-3.2" y1="-2" x2="-2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="2" y1="-2" x2="3.2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="3.2" y1="-2" x2="3.2" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="3.2" y1="-4.5" x2="4" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="4" y1="-4.5" x2="4" y2="-1" width="0.2032" layer="21"/>
+<wire x1="2" y1="3" x2="-2" y2="3" width="0.2032" layer="21"/>
+<smd name="1" x="-1" y="-3.7" dx="1" dy="4.6" layer="1"/>
+<smd name="2" x="1" y="-3.7" dx="1" dy="4.6" layer="1"/>
+<smd name="NC1" x="-3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<smd name="NC2" x="3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<text x="-1.27" y="1.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.27" y="0" size="0.4064" layer="27">&gt;Value</text>
+<text x="2.159" y="-4.445" size="1.27" layer="51">+</text>
+<text x="-2.921" y="-4.445" size="1.27" layer="51">-</text>
+</package>
+<package name="1X02_BIG">
+<wire x1="-1.27" y1="1.27" x2="-1.27" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-1.27" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-1.27" x2="5.08" y2="1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="1.27" x2="-1.27" y2="1.27" width="0.127" layer="21"/>
+<pad name="P$1" x="0" y="0" drill="1.0668"/>
+<pad name="P$2" x="3.81" y="0" drill="1.0668"/>
+</package>
+<package name="JST-2-SMD-VERT">
+<wire x1="-4.1" y1="2.97" x2="4.2" y2="2.97" width="0.2032" layer="51"/>
+<wire x1="4.2" y1="2.97" x2="4.2" y2="-2.13" width="0.2032" layer="51"/>
+<wire x1="4.2" y1="-2.13" x2="-4.1" y2="-2.13" width="0.2032" layer="51"/>
+<wire x1="-4.1" y1="-2.13" x2="-4.1" y2="2.97" width="0.2032" layer="51"/>
+<wire x1="-4.1" y1="3" x2="4.2" y2="3" width="0.2032" layer="21"/>
+<wire x1="4.2" y1="3" x2="4.2" y2="2.3" width="0.2032" layer="21"/>
+<wire x1="-4.1" y1="3" x2="-4.1" y2="2.3" width="0.2032" layer="21"/>
+<wire x1="2" y1="-2.1" x2="4.2" y2="-2.1" width="0.2032" layer="21"/>
+<wire x1="4.2" y1="-2.1" x2="4.2" y2="-1.7" width="0.2032" layer="21"/>
+<wire x1="-2" y1="-2.1" x2="-4.1" y2="-2.1" width="0.2032" layer="21"/>
+<wire x1="-4.1" y1="-2.1" x2="-4.1" y2="-1.8" width="0.2032" layer="21"/>
+<smd name="P$1" x="-3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/>
+<smd name="P$2" x="3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/>
+<smd name="VCC" x="-1" y="-2" dx="1" dy="5.5" layer="1"/>
+<smd name="GND" x="1" y="-2" dx="1" dy="5.5" layer="1"/>
+<text x="2.54" y="-5.08" size="1.27" layer="25">&gt;Name</text>
+<text x="2.24" y="3.48" size="1.27" layer="27">&gt;Value</text>
+</package>
+<package name="R_SW_TH">
+<wire x1="-1.651" y1="19.2532" x2="-1.651" y2="-1.3716" width="0.2032" layer="21"/>
+<wire x1="-1.651" y1="-1.3716" x2="-1.651" y2="-2.2352" width="0.2032" layer="21"/>
+<wire x1="-1.651" y1="19.2532" x2="13.589" y2="19.2532" width="0.2032" layer="21"/>
+<wire x1="13.589" y1="19.2532" x2="13.589" y2="-2.2352" width="0.2032" layer="21"/>
+<wire x1="13.589" y1="-2.2352" x2="-1.651" y2="-2.2352" width="0.2032" layer="21"/>
+<pad name="P$1" x="0" y="0" drill="1.6002"/>
+<pad name="P$2" x="0" y="16.9926" drill="1.6002"/>
+<pad name="P$3" x="12.0904" y="15.494" drill="1.6002"/>
+<pad name="P$4" x="12.0904" y="8.4582" drill="1.6002"/>
+</package>
+<package name="SCREWTERMINAL-5MM-2">
+<wire x1="-3.1" y1="4.2" x2="8.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="4.2" x2="8.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-2.3" x2="8.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-3.3" x2="-3.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-3.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-2.3" x2="-3.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-2.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-1.35" x2="-3.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-1.35" x2="-3.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-2.35" x2="-3.1" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="8.1" y1="4" x2="8.7" y2="4" width="0.2032" layer="51"/>
+<wire x1="8.7" y1="4" x2="8.7" y2="3" width="0.2032" layer="51"/>
+<wire x1="8.7" y1="3" x2="8.1" y2="3" width="0.2032" layer="51"/>
+<circle x="2.5" y="3.7" radius="0.2828" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.3" diameter="2.032" shape="square"/>
+<pad name="2" x="5" y="0" drill="1.3" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1X02_LOCK">
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="-0.1778" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.7178" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+</package>
+<package name="MOLEX-1X2_LOCK">
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="-0.127" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.667" y="0" drill="1.016" diameter="1.8796"/>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+</package>
+<package name="1X02_LOCK_LONGPADS">
+<description>This footprint was designed to help hold the alignment of a through-hole component (i.e.  6-pin header) while soldering it into place.  
+You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).  
+This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes.  Because they are alternating, it causes a "brace" 
+to hold the component in place.  0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
+Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice.  Also,
+if you push a header all the way into place, it is covered up entirely on the bottom side.  This idea of altering the position of holes to aid alignment 
+will be further integrated into the Sparkfun Library for other footprints.  It can help hold any component with 3 or more connection pins.</description>
+<wire x1="1.651" y1="0" x2="0.889" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.016" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="0.9906" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.9906" x2="-0.9906" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="-0.9906" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.9906" x2="-0.9906" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.556" y2="0" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.81" y2="-0.9906" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.9906" x2="3.5306" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.81" y2="0.9906" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.9906" x2="3.5306" y2="1.27" width="0.2032" layer="21"/>
+<pad name="1" x="-0.127" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="2" x="2.667" y="0" drill="1.016" shape="long" rot="R90"/>
+<text x="-1.27" y="1.778" size="1.27" layer="25" font="vector">&gt;NAME</text>
+<text x="-1.27" y="-3.302" size="1.27" layer="27" font="vector">&gt;VALUE</text>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+</package>
+<package name="SCREWTERMINAL-3.5MM-2_LOCK">
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<circle x="0" y="0" radius="0.4318" width="0.0254" layer="51"/>
+<circle x="3.5" y="0" radius="0.4318" width="0.0254" layer="51"/>
+<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.6778" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1X02_LONGPADS">
+<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+</package>
+<package name="1X02_NO_SILK">
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="JST-2-PTH">
+<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="21"/>
+<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="21"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="21"/>
+<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="21"/>
+<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="21"/>
+<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="21"/>
+<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="21"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478"/>
+<text x="-1.27" y="5.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.27" y="4" size="0.4064" layer="27">&gt;Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+</package>
+<package name="1X02_XTRA_BIG">
+<wire x1="-5.08" y1="2.54" x2="-5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="-5.08" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-2.54" x2="5.08" y2="2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="2.54" x2="-5.08" y2="2.54" width="0.127" layer="21"/>
+<pad name="1" x="-2.54" y="0" drill="2.0574" diameter="3.556"/>
+<pad name="2" x="2.54" y="0" drill="2.0574" diameter="3.556"/>
+</package>
+<package name="1X02_PP_HOLES_ONLY">
+<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/>
+<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
+<hole x="0" y="0" drill="1.4732"/>
+<hole x="2.54" y="0" drill="1.4732"/>
+</package>
+<package name="SCREWTERMINAL-3.5MM-2-NS">
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="JST-2-PTH-NS">
+<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
+<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
+<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478"/>
+<text x="-1.27" y="5.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.27" y="4" size="0.4064" layer="27">&gt;Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+</package>
+<package name="JST-2-PTH-KIT">
+<description>&lt;H3&gt;JST-2-PTH-KIT&lt;/h3&gt;
+2-Pin JST, through-hole connector&lt;br&gt;
+&lt;br&gt;
+&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
+<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
+<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
+<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
+<text x="-1.27" y="5.27" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.27" y="4" size="0.4064" layer="27">&gt;Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+<polygon width="0.127" layer="30">
+<vertex x="-0.9975" y="-0.6604" curve="-90.025935"/>
+<vertex x="-1.6604" y="0" curve="-90.017354"/>
+<vertex x="-1" y="0.6604" curve="-90"/>
+<vertex x="-0.3396" y="0" curve="-90.078137"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="-1" y="-0.2865" curve="-90.08005"/>
+<vertex x="-1.2865" y="0" curve="-90.040011"/>
+<vertex x="-1" y="0.2865" curve="-90"/>
+<vertex x="-0.7135" y="0" curve="-90"/>
+</polygon>
+<polygon width="0.127" layer="30">
+<vertex x="1.0025" y="-0.6604" curve="-90.025935"/>
+<vertex x="0.3396" y="0" curve="-90.017354"/>
+<vertex x="1" y="0.6604" curve="-90"/>
+<vertex x="1.6604" y="0" curve="-90.078137"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="1" y="-0.2865" curve="-90.08005"/>
+<vertex x="0.7135" y="0" curve="-90.040011"/>
+<vertex x="1" y="0.2865" curve="-90"/>
+<vertex x="1.2865" y="0" curve="-90"/>
+</polygon>
+</package>
+<package name="SPRINGTERMINAL-2.54MM-2">
+<wire x1="-4.2" y1="7.88" x2="-4.2" y2="-2.8" width="0.254" layer="21"/>
+<wire x1="-4.2" y1="-2.8" x2="-4.2" y2="-4.72" width="0.254" layer="51"/>
+<wire x1="-4.2" y1="-4.72" x2="3.44" y2="-4.72" width="0.254" layer="51"/>
+<wire x1="3.44" y1="-4.72" x2="3.44" y2="-2.8" width="0.254" layer="51"/>
+<wire x1="3.44" y1="7.88" x2="-4.2" y2="7.88" width="0.254" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="1"/>
+<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="16"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="16"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="1"/>
+<wire x1="-4.2" y1="-2.8" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
+<wire x1="3.44" y1="4" x2="3.44" y2="1" width="0.254" layer="21"/>
+<wire x1="3.44" y1="7.88" x2="3.44" y2="6" width="0.254" layer="21"/>
+<wire x1="3.44" y1="-0.9" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.1" diameter="1.9"/>
+<pad name="P$2" x="0" y="5.08" drill="1.1" diameter="1.9"/>
+<pad name="P$3" x="2.54" y="5.08" drill="1.1" diameter="1.9"/>
+<pad name="2" x="2.54" y="0" drill="1.1" diameter="1.9"/>
+</package>
+</packages>
+<symbols>
+<symbol name="M02">
+<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
+<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<text x="-2.54" y="-5.08" size="1.778" layer="96">&gt;VALUE</text>
+<text x="-2.54" y="5.842" size="1.778" layer="95">&gt;NAME</text>
+<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="M02" prefix="JP" uservalue="yes">
+<description>&lt;b&gt;Header 2&lt;/b&gt;
+Standard 2-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08233 with associated crimp pins and housings.</description>
+<gates>
+<gate name="G$1" symbol="M02" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="PTH" package="1X02">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POLAR" package="MOLEX-1X2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="3.5MM" package="SCREWTERMINAL-3.5MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-JST-2MM-SMT" package="JST-2-SMD">
+<connects>
+<connect gate="G$1" pin="1" pad="2"/>
+<connect gate="G$1" pin="2" pad="1"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08352"/>
+</technology>
+</technologies>
+</device>
+<device name="PTH2" package="1X02_BIG">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="4UCON-15767" package="JST-2-SMD-VERT">
+<connects>
+<connect gate="G$1" pin="1" pad="GND"/>
+<connect gate="G$1" pin="2" pad="VCC"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="ROCKER" package="R_SW_TH">
+<connects>
+<connect gate="G$1" pin="1" pad="P$3"/>
+<connect gate="G$1" pin="2" pad="P$4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="5MM" package="SCREWTERMINAL-5MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK" package="1X02_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POLAR_LOCK" package="MOLEX-1X2_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK_LONGPADS" package="1X02_LOCK_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="3.5MM_LOCK" package="SCREWTERMINAL-3.5MM-2_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH3" package="1X02_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1X02_NO_SILK" package="1X02_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="JST-PTH-2" package="JST-2-PTH">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH4" package="1X02_XTRA_BIG">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POGO_PIN_HOLES_ONLY" package="1X02_PP_HOLES_ONLY">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="3.5MM-NO_SILK" package="SCREWTERMINAL-3.5MM-2-NS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-JST-2-PTH-NO_SILK" package="JST-2-PTH-NS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="JST-PTH-2-KIT" package="JST-2-PTH-KIT">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SPRING-2.54-RA" package="SPRINGTERMINAL-2.54MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</libraries>
+<attributes>
+</attributes>
+<variantdefs>
+</variantdefs>
+<classes>
+<class number="0" name="default" width="0" drill="0">
+</class>
+</classes>
+<parts>
+<part name="U$1" library="jabinder" deviceset="BK-18650-PC4" device=""/>
+<part name="U2" library="jabinder" deviceset="LT3650" device=""/>
+<part name="CHRG" library="jabinder" deviceset="C-GRID-71308" device=""/>
+<part name="BAT" library="jabinder" deviceset="C-GRID-71308" device=""/>
+<part name="GND1" library="supply1" deviceset="GND" device=""/>
+<part name="GND2" library="supply1" deviceset="GND" device=""/>
+<part name="C1" library="SparkFun-Capacitors" deviceset="CAP" device="0805" value="10uF"/>
+<part name="C2" library="SparkFun-Capacitors" deviceset="CAP" device="0805" value="1uF"/>
+<part name="D1" library="SparkFun-DiscreteSemi" deviceset="DIODE-SCHOTTKY" device="_"/>
+<part name="L1" library="inductor-neosid" deviceset="SM-1206" device="" value="6.8uH"/>
+<part name="GND3" library="supply1" deviceset="GND" device=""/>
+<part name="C3" library="SparkFun-Capacitors" deviceset="CAP" device="0805" value="10uF"/>
+<part name="GND4" library="supply1" deviceset="GND" device=""/>
+<part name="R1" library="SparkFun-Passives" deviceset="RESISTOR" device="0805-RES" value="0.05"/>
+<part name="JP1" library="SparkFun-Connectors" deviceset="M02" device="PTH"/>
+<part name="GND5" library="supply1" deviceset="GND" device=""/>
+<part name="GND6" library="supply1" deviceset="GND" device=""/>
+<part name="C4" library="SparkFun-Capacitors" deviceset="CAP" device="0805" value="0.68uF"/>
+<part name="D2" library="SparkFun-DiscreteSemi" deviceset="DIODE-SCHOTTKY" device="_"/>
+<part name="GND7" library="supply1" deviceset="GND" device=""/>
+</parts>
+<sheets>
+<sheet>
+<plain>
+<wire x1="-53.34" y1="35.56" x2="-22.86" y2="35.56" width="0.1524" layer="97"/>
+<wire x1="-22.86" y1="35.56" x2="-22.86" y2="-17.78" width="0.1524" layer="97"/>
+<wire x1="-22.86" y1="-17.78" x2="-53.34" y2="-17.78" width="0.1524" layer="97"/>
+<wire x1="-53.34" y1="-17.78" x2="-53.34" y2="35.56" width="0.1524" layer="97"/>
+<text x="-40.64" y="-15.24" size="2.54" layer="97">Batteries</text>
+<wire x1="-53.34" y1="35.56" x2="-53.34" y2="60.96" width="0.1524" layer="97"/>
+<wire x1="-53.34" y1="60.96" x2="-22.86" y2="60.96" width="0.1524" layer="97"/>
+<wire x1="-22.86" y1="60.96" x2="-22.86" y2="35.56" width="0.1524" layer="97"/>
+<wire x1="-53.34" y1="-17.78" x2="-53.34" y2="-45.72" width="0.1524" layer="97"/>
+<wire x1="-53.34" y1="-45.72" x2="-22.86" y2="-45.72" width="0.1524" layer="97"/>
+<wire x1="-22.86" y1="-45.72" x2="-22.86" y2="-17.78" width="0.1524" layer="97"/>
+<text x="-51.054" y="-44.704" size="2.54" layer="97">Batt Header</text>
+<text x="-50.038" y="56.896" size="2.54" layer="97">CHRG Header</text>
+<text x="58.42" y="38.1" size="1.778" layer="97">WSLPD-.05CT-ND For Current Sense Resistor</text>
+</plain>
+<instances>
+<instance part="U$1" gate="G$1" x="-38.1" y="12.7"/>
+<instance part="U2" gate="G$1" x="38.1" y="15.24"/>
+<instance part="CHRG" gate="G$1" x="-38.1" y="50.8"/>
+<instance part="BAT" gate="G$1" x="-38.1" y="-30.48"/>
+<instance part="GND1" gate="1" x="-27.94" y="-40.64"/>
+<instance part="GND2" gate="1" x="-30.48" y="40.64"/>
+<instance part="C1" gate="G$1" x="5.08" y="17.78"/>
+<instance part="C2" gate="G$1" x="63.5" y="25.4" rot="R180"/>
+<instance part="D1" gate="G$1" x="63.5" y="15.24" smashed="yes" rot="R90">
+<attribute name="NAME" x="68.0974" y="12.7" size="1.778" layer="95" rot="R90"/>
+</instance>
+<instance part="L1" gate="G$1" x="68.58" y="20.32" rot="R90"/>
+<instance part="GND3" gate="1" x="17.78" y="-15.24"/>
+<instance part="C3" gate="G$1" x="73.66" y="5.08"/>
+<instance part="GND4" gate="1" x="73.66" y="-2.54"/>
+<instance part="R1" gate="G$1" x="76.2" y="15.24" rot="R90"/>
+<instance part="JP1" gate="G$1" x="63.5" y="-10.16" rot="R90"/>
+<instance part="GND5" gate="1" x="2.54" y="12.7" rot="R270"/>
+<instance part="GND6" gate="1" x="-30.48" y="-5.08"/>
+<instance part="C4" gate="G$1" x="17.78" y="0" rot="R90"/>
+<instance part="D2" gate="G$1" x="76.2" y="27.94" smashed="yes" rot="R180">
+<attribute name="NAME" x="78.74" y="32.5374" size="1.778" layer="95" rot="R180"/>
+</instance>
+<instance part="GND7" gate="1" x="81.28" y="22.86"/>
+</instances>
+<busses>
+</busses>
+<nets>
+<net name="V_BATT+" class="0">
+<segment>
+<pinref part="U$1" gate="G$1" pin="+1"/>
+<wire x1="-43.18" y1="17.78" x2="-43.18" y2="22.86" width="0.1524" layer="91"/>
+<label x="-43.18" y="17.78" size="1.778" layer="95" rot="R90"/>
+</segment>
+<segment>
+<pinref part="BAT" gate="G$1" pin="1"/>
+<wire x1="-45.72" y1="-27.94" x2="-48.26" y2="-27.94" width="0.1524" layer="91"/>
+<wire x1="-48.26" y1="-27.94" x2="-48.26" y2="-33.02" width="0.1524" layer="91"/>
+<pinref part="BAT" gate="G$1" pin="2"/>
+<wire x1="-48.26" y1="-33.02" x2="-45.72" y2="-33.02" width="0.1524" layer="91"/>
+<wire x1="-48.26" y1="-33.02" x2="-48.26" y2="-40.64" width="0.1524" layer="91"/>
+<junction x="-48.26" y="-33.02"/>
+<label x="-48.26" y="-38.1" size="1.778" layer="95" rot="R90"/>
+</segment>
+<segment>
+<pinref part="D1" gate="G$1" pin="A"/>
+<wire x1="63.5" y1="12.7" x2="63.5" y2="10.16" width="0.1524" layer="91"/>
+<pinref part="U2" gate="G$1" pin="BAT"/>
+<wire x1="63.5" y1="10.16" x2="53.34" y2="10.16" width="0.1524" layer="91"/>
+<pinref part="C3" gate="G$1" pin="1"/>
+<wire x1="63.5" y1="10.16" x2="73.66" y2="10.16" width="0.1524" layer="91"/>
+<junction x="63.5" y="10.16"/>
+<wire x1="73.66" y1="10.16" x2="76.2" y2="10.16" width="0.1524" layer="91"/>
+<junction x="73.66" y="10.16"/>
+<label x="78.74" y="7.62" size="1.778" layer="95"/>
+<pinref part="R1" gate="G$1" pin="1"/>
+<wire x1="76.2" y1="10.16" x2="81.28" y2="10.16" width="0.1524" layer="91"/>
+<junction x="76.2" y="10.16"/>
+</segment>
+</net>
+<net name="N$1" class="0">
+<segment>
+<pinref part="U$1" gate="G$1" pin="-1"/>
+<wire x1="-43.18" y1="5.08" x2="-43.18" y2="-2.54" width="0.1524" layer="91"/>
+<wire x1="-43.18" y1="-2.54" x2="-36.54489375" y2="-2.54" width="0.1524" layer="91"/>
+<wire x1="-36.54489375" y1="-2.54" x2="-36.54489375" y2="17.78" width="0.1524" layer="91"/>
+<pinref part="U$1" gate="G$1" pin="+2"/>
+<wire x1="-36.54489375" y1="17.78" x2="-30.48" y2="17.78" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="GND" class="0">
+<segment>
+<pinref part="BAT" gate="G$1" pin="4"/>
+<wire x1="-33.02" y1="-27.94" x2="-27.94" y2="-27.94" width="0.1524" layer="91"/>
+<wire x1="-27.94" y1="-27.94" x2="-27.94" y2="-33.02" width="0.1524" layer="91"/>
+<pinref part="BAT" gate="G$1" pin="3"/>
+<wire x1="-27.94" y1="-33.02" x2="-27.94" y2="-38.1" width="0.1524" layer="91"/>
+<wire x1="-33.02" y1="-33.02" x2="-27.94" y2="-33.02" width="0.1524" layer="91"/>
+<junction x="-27.94" y="-33.02"/>
+<pinref part="GND1" gate="1" pin="GND"/>
+</segment>
+<segment>
+<pinref part="CHRG" gate="G$1" pin="4"/>
+<wire x1="-33.02" y1="53.34" x2="-30.48" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="-30.48" y1="53.34" x2="-30.48" y2="48.26" width="0.1524" layer="91"/>
+<pinref part="CHRG" gate="G$1" pin="3"/>
+<wire x1="-30.48" y1="48.26" x2="-30.48" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="-33.02" y1="48.26" x2="-30.48" y2="48.26" width="0.1524" layer="91"/>
+<junction x="-30.48" y="48.26"/>
+<pinref part="GND2" gate="1" pin="GND"/>
+</segment>
+<segment>
+<pinref part="U2" gate="G$1" pin="GND"/>
+<wire x1="17.78" y1="-5.08" x2="17.78" y2="-12.7" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="-5.08" x2="17.78" y2="-5.08" width="0.1524" layer="91"/>
+<pinref part="GND3" gate="1" pin="GND"/>
+<wire x1="17.78" y1="-5.08" x2="10.16" y2="-5.08" width="0.1524" layer="91"/>
+<wire x1="10.16" y1="-5.08" x2="10.16" y2="0" width="0.1524" layer="91"/>
+<junction x="17.78" y="-5.08"/>
+<pinref part="C4" gate="G$1" pin="1"/>
+<wire x1="10.16" y1="0" x2="12.7" y2="0" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="C3" gate="G$1" pin="2"/>
+<pinref part="GND4" gate="1" pin="GND"/>
+<pinref part="JP1" gate="G$1" pin="1"/>
+<wire x1="63.5" y1="-2.54" x2="63.5" y2="0" width="0.1524" layer="91"/>
+<wire x1="63.5" y1="0" x2="73.66" y2="0" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="0" x2="73.66" y2="2.54" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="C1" gate="G$1" pin="2"/>
+<wire x1="5.08" y1="15.24" x2="5.08" y2="12.7" width="0.1524" layer="91"/>
+<pinref part="GND5" gate="1" pin="GND"/>
+</segment>
+<segment>
+<pinref part="U$1" gate="G$1" pin="-2"/>
+<wire x1="-30.48" y1="5.08" x2="-30.48" y2="-2.54" width="0.1524" layer="91"/>
+<pinref part="GND6" gate="1" pin="GND"/>
+</segment>
+<segment>
+<pinref part="D2" gate="G$1" pin="A"/>
+<wire x1="78.74" y1="27.94" x2="81.28" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="81.28" y1="27.94" x2="81.28" y2="25.4" width="0.1524" layer="91"/>
+<pinref part="GND7" gate="1" pin="GND"/>
+</segment>
+</net>
+<net name="VIN" class="0">
+<segment>
+<pinref part="CHRG" gate="G$1" pin="1"/>
+<wire x1="-45.72" y1="53.34" x2="-50.8" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="-50.8" y1="53.34" x2="-50.8" y2="48.26" width="0.1524" layer="91"/>
+<pinref part="CHRG" gate="G$1" pin="2"/>
+<wire x1="-50.8" y1="48.26" x2="-45.72" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="-50.8" y1="48.26" x2="-50.8" y2="40.64" width="0.1524" layer="91"/>
+<junction x="-50.8" y="48.26"/>
+<label x="-48.26" y="40.64" size="1.778" layer="95" rot="R90"/>
+</segment>
+<segment>
+<pinref part="U2" gate="G$1" pin="!SHDN"/>
+<wire x1="22.86" y1="15.24" x2="15.24" y2="15.24" width="0.1524" layer="91"/>
+<pinref part="U2" gate="G$1" pin="VIN"/>
+<wire x1="22.86" y1="25.4" x2="15.24" y2="25.4" width="0.1524" layer="91"/>
+<pinref part="U2" gate="G$1" pin="CLP"/>
+<wire x1="22.86" y1="20.32" x2="15.24" y2="20.32" width="0.1524" layer="91"/>
+<wire x1="15.24" y1="20.32" x2="15.24" y2="25.4" width="0.1524" layer="91"/>
+<junction x="15.24" y="25.4"/>
+<wire x1="15.24" y1="15.24" x2="15.24" y2="20.32" width="0.1524" layer="91"/>
+<junction x="15.24" y="20.32"/>
+<wire x1="15.24" y1="25.4" x2="5.08" y2="25.4" width="0.1524" layer="91"/>
+<pinref part="C1" gate="G$1" pin="1"/>
+<wire x1="5.08" y1="25.4" x2="-2.54" y2="25.4" width="0.1524" layer="91"/>
+<wire x1="5.08" y1="25.4" x2="5.08" y2="22.86" width="0.1524" layer="91"/>
+<junction x="5.08" y="25.4"/>
+<label x="-2.54" y="25.4" size="1.778" layer="95"/>
+</segment>
+</net>
+<net name="N$6" class="0">
+<segment>
+<pinref part="C2" gate="G$1" pin="2"/>
+<pinref part="U2" gate="G$1" pin="SW"/>
+<wire x1="63.5" y1="27.94" x2="53.34" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="53.34" y1="27.94" x2="53.34" y2="25.4" width="0.1524" layer="91"/>
+<pinref part="L1" gate="G$1" pin="2"/>
+<wire x1="63.5" y1="27.94" x2="68.58" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="68.58" y1="27.94" x2="68.58" y2="25.4" width="0.1524" layer="91"/>
+<junction x="63.5" y="27.94"/>
+<pinref part="D2" gate="G$1" pin="C"/>
+<wire x1="68.58" y1="27.94" x2="73.66" y2="27.94" width="0.1524" layer="91"/>
+<junction x="68.58" y="27.94"/>
+</segment>
+</net>
+<net name="N$2" class="0">
+<segment>
+<pinref part="U2" gate="G$1" pin="BOOST"/>
+<pinref part="C2" gate="G$1" pin="1"/>
+<wire x1="53.34" y1="20.32" x2="63.5" y2="20.32" width="0.1524" layer="91"/>
+<pinref part="D1" gate="G$1" pin="C"/>
+<wire x1="63.5" y1="20.32" x2="63.5" y2="17.78" width="0.1524" layer="91"/>
+<junction x="63.5" y="20.32"/>
+</segment>
+</net>
+<net name="N$7" class="0">
+<segment>
+<pinref part="U2" gate="G$1" pin="SENSE"/>
+<pinref part="L1" gate="G$1" pin="1"/>
+<wire x1="53.34" y1="15.24" x2="68.58" y2="15.24" width="0.1524" layer="91"/>
+<wire x1="68.58" y1="15.24" x2="73.66" y2="15.24" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="15.24" x2="73.66" y2="20.32" width="0.1524" layer="91"/>
+<junction x="68.58" y="15.24"/>
+<pinref part="R1" gate="G$1" pin="2"/>
+<wire x1="73.66" y1="20.32" x2="76.2" y2="20.32" width="0.1524" layer="91"/>
+<wire x1="53.34" y1="15.24" x2="68.58" y2="15.24" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$3" class="0">
+<segment>
+<pinref part="U2" gate="G$1" pin="NTC"/>
+<pinref part="JP1" gate="G$1" pin="2"/>
+<wire x1="53.34" y1="5.08" x2="60.96" y2="5.08" width="0.1524" layer="91"/>
+<wire x1="60.96" y1="5.08" x2="60.96" y2="-2.54" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$4" class="0">
+<segment>
+<pinref part="C4" gate="G$1" pin="2"/>
+<pinref part="U2" gate="G$1" pin="TIMER"/>
+<wire x1="20.32" y1="0" x2="22.86" y2="0" width="0.1524" layer="91"/>
+</segment>
+</net>
+</nets>
+</sheet>
+</sheets>
+</schematic>
+</drawing>
+</eagle>
diff --git a/lbr/jabinder.lbr b/lbr/jabinder.lbr
new file mode 100644
index 0000000..5a52881
--- /dev/null
+++ b/lbr/jabinder.lbr
@@ -0,0 +1,230 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="6.3">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="2" name="Route2" color="1" fill="3" visible="no" active="yes"/>
+<layer number="3" name="Route3" color="4" fill="3" visible="no" active="yes"/>
+<layer number="14" name="Route14" color="1" fill="6" visible="no" active="yes"/>
+<layer number="15" name="Route15" color="4" fill="6" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+</layers>
+<library>
+<packages>
+<package name="18650-PC4">
+<pad name="+1" x="-36.195" y="9.652" drill="1.524"/>
+<pad name="-1" x="36.195" y="9.652" drill="1.524"/>
+<pad name="-2" x="36.195" y="-9.652" drill="1.524"/>
+<pad name="+2" x="-36.195" y="-9.652" drill="1.524"/>
+<wire x1="-38.862" y1="20.066" x2="-38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="38.862" y1="20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="20.066" x2="38.862" y2="20.066" width="0.127" layer="21"/>
+<wire x1="-38.862" y1="-20.066" x2="38.862" y2="-20.066" width="0.127" layer="21"/>
+<hole x="-27.813" y="9.652" drill="3.2004"/>
+<hole x="-27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="-9.652" drill="3.2004"/>
+<hole x="27.813" y="9.652" drill="3.2004"/>
+<text x="-34.29" y="8.382" size="2.54" layer="21">+</text>
+<text x="-34.29" y="-10.922" size="2.54" layer="21">+</text>
+<text x="33.02" y="8.128" size="2.54" layer="21">-</text>
+<text x="33.02" y="-10.922" size="2.54" layer="21">-</text>
+</package>
+<package name="12-MSOP">
+<smd name="12" x="-1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="11" x="-0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="10" x="-0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="9" x="0.32511875" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="8" x="0.975359375" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="7" x="1.6256" y="2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="1" x="-1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="2" x="-0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="3" x="-0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="4" x="0.32511875" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="5" x="0.975359375" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="6" x="1.6256" y="-2.0447" dx="0.4191" dy="1.016" layer="1"/>
+<smd name="GND" x="0" y="0" dx="2.8448" dy="1.651" layer="1"/>
+<wire x1="2.0193" y1="1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="-2.0193" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="1.27" x2="2.0193" y2="1.27" width="0.127" layer="21"/>
+<wire x1="-2.0193" y1="-1.27" x2="2.0193" y2="-1.27" width="0.127" layer="21"/>
+<text x="-1.98881875" y="-1.0414" size="1.27" layer="21">.</text>
+<text x="-2.54" y="-2.54" size="1.016" layer="21">1</text>
+</package>
+<package name="4HEAD_MOLEX_C71308">
+<smd name="4" x="-1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="3" x="1.27" y="2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="1" x="-1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<smd name="2" x="1.27" y="-2.2225" dx="1.27" dy="3.683" layer="1"/>
+<wire x1="-2.54" y1="3.81" x2="-2.54" y2="-3.81" width="0.127" layer="21"/>
+<wire x1="2.54" y1="3.81" x2="2.54" y2="-3.81" width="0.127" layer="21"/>
+<text x="-2.54" y="-3.81" size="1.27" layer="21">.</text>
+<text x="4.064" y="-2.54" size="1.27" layer="25" rot="R90">&gt;Name</text>
+</package>
+</packages>
+<symbols>
+<symbol name="2CELLBATT">
+<wire x1="-10.16" y1="0" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="-2.54" x2="-2.54" y2="-2.54" width="0.254" layer="94"/>
+<wire x1="2.54" y1="0" x2="12.7" y2="0" width="0.254" layer="94"/>
+<wire x1="5.08" y1="-2.54" x2="10.16" y2="-2.54" width="0.254" layer="94"/>
+<pin name="-2" x="7.62" y="-7.62" visible="off" length="middle" rot="R90"/>
+<pin name="+1" x="-5.08" y="5.08" visible="off" length="middle" rot="R270"/>
+<pin name="-1" x="-5.08" y="-7.62" visible="off" length="middle" rot="R90"/>
+<pin name="+2" x="7.62" y="5.08" visible="off" length="middle" rot="R270"/>
+</symbol>
+<symbol name="LT3650">
+<wire x1="-10.16" y1="12.7" x2="-10.16" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-10.16" y1="-22.86" x2="10.16" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="10.16" y1="-22.86" x2="10.16" y2="12.7" width="0.254" layer="94"/>
+<wire x1="10.16" y1="12.7" x2="-10.16" y2="12.7" width="0.254" layer="94"/>
+<pin name="VIN" x="-15.24" y="10.16" visible="pin" length="middle"/>
+<pin name="CLP" x="-15.24" y="5.08" visible="pin" length="middle"/>
+<pin name="!SHDN" x="-15.24" y="0" visible="pin" length="middle"/>
+<pin name="!CHRG" x="-15.24" y="-5.08" visible="pin" length="middle"/>
+<pin name="!FAULT" x="-15.24" y="-10.16" visible="pin" length="middle"/>
+<pin name="TIMER" x="-15.24" y="-15.24" visible="pin" length="middle"/>
+<pin name="RNG/SS" x="15.24" y="-15.24" visible="pin" length="middle" rot="R180"/>
+<pin name="NTC" x="15.24" y="-10.16" visible="pin" length="middle" rot="R180"/>
+<pin name="BAT" x="15.24" y="-5.08" visible="pin" length="middle" rot="R180"/>
+<pin name="SENSE" x="15.24" y="0" visible="pin" length="middle" rot="R180"/>
+<pin name="BOOST" x="15.24" y="5.08" visible="pin" length="middle" rot="R180"/>
+<pin name="SW" x="15.24" y="10.16" visible="pin" length="middle" rot="R180"/>
+<pin name="GND" x="-15.24" y="-20.32" visible="pin" length="middle"/>
+<text x="2.54" y="-25.4" size="1.778" layer="95">&gt;Name</text>
+</symbol>
+<symbol name="SMT_HEADER_4">
+<pin name="1" x="-7.62" y="2.54" visible="off" length="short"/>
+<pin name="2" x="-7.62" y="-2.54" visible="off" length="short"/>
+<pin name="4" x="5.08" y="2.54" visible="off" length="short" rot="R180"/>
+<pin name="3" x="5.08" y="-2.54" visible="off" length="short" rot="R180"/>
+<wire x1="-5.08" y1="5.08" x2="-5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-5.08" x2="2.54" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-5.08" x2="2.54" y2="5.08" width="0.254" layer="94"/>
+<wire x1="2.54" y1="5.08" x2="-5.08" y2="5.08" width="0.254" layer="94"/>
+<text x="-4.318" y="2.286" size="1.778" layer="97">1</text>
+<text x="-4.318" y="-3.302" size="1.778" layer="97">2</text>
+<text x="0.508" y="-3.302" size="1.778" layer="97">3</text>
+<text x="0.508" y="2.286" size="1.778" layer="97">4</text>
+<text x="-5.08" y="-7.62" size="1.778" layer="97">&gt;Name</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="BK-18650-PC4">
+<gates>
+<gate name="G$1" symbol="2CELLBATT" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="18650-PC4">
+<connects>
+<connect gate="G$1" pin="+1" pad="+1"/>
+<connect gate="G$1" pin="+2" pad="+2"/>
+<connect gate="G$1" pin="-1" pad="-1"/>
+<connect gate="G$1" pin="-2" pad="-2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="LT3650">
+<description>A monolithic two cell lithium ion charger.</description>
+<gates>
+<gate name="G$1" symbol="LT3650" x="0" y="5.08"/>
+</gates>
+<devices>
+<device name="" package="12-MSOP">
+<connects>
+<connect gate="G$1" pin="!CHRG" pad="4"/>
+<connect gate="G$1" pin="!FAULT" pad="5"/>
+<connect gate="G$1" pin="!SHDN" pad="3"/>
+<connect gate="G$1" pin="BAT" pad="9"/>
+<connect gate="G$1" pin="BOOST" pad="11"/>
+<connect gate="G$1" pin="CLP" pad="2"/>
+<connect gate="G$1" pin="GND" pad="GND"/>
+<connect gate="G$1" pin="NTC" pad="8"/>
+<connect gate="G$1" pin="RNG/SS" pad="7"/>
+<connect gate="G$1" pin="SENSE" pad="10"/>
+<connect gate="G$1" pin="SW" pad="12"/>
+<connect gate="G$1" pin="TIMER" pad="6"/>
+<connect gate="G$1" pin="VIN" pad="1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="C-GRID-71308">
+<description>4 Pin SMT Molex HEADER
+Digikey: WM17450-ND</description>
+<gates>
+<gate name="G$1" symbol="SMT_HEADER_4" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="4HEAD_MOLEX_C71308">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</drawing>
+</eagle>
