Project

General

Profile

Statistics
| Branch: | Revision:

root / scoutfly @ 8c16f5aa

Name Size
charging_test.brd 24 KB
charging_test.sch 72 KB
scoutfly.brd 227 KB
scoutfly.dimensions.ger 8.85 KB
scoutfly.sch 361 KB
scoutfly_atmel.brd 274 KB
scoutfly_atmel.sch 396 KB
scoutfly_nxp.brd 150 KB
scoutfly_nxp.sch 366 KB
scoutfly_v1.0.zip 329 KB
scoutfly_v1.0_stencil.zip 11.7 KB
scoutfly_v1.1_10-03-2010.zip 252 KB
scoutfly_v1.1_10-04-2010.zip 252 KB
scoutfly_v1.1_10-08-2010.zip 222 KB

Latest revisions

# Date Author Comment
8c16f5aa 11/02/2011 07:15 PM Abraham Levkoy

Started to add USB port to power board

Added USB port and USB-UART converter to power board schematic. I think
the converter has enough hooked up to it to run without burning up, but
it's not hooked up the AVR yet.
107d33d7 11/02/2011 05:10 AM Abraham Levkoy

Shorted GND to BATT_GND in power schematic

Connected GND and BATT_GND to eachother using a 0 Ohm resistor. I want
to keep the signals separate to ease routing, but they need to be
connected to ensure that all of the current that needs to go through the
fuel gauge sense resistor does so.
9f7d5c6f 11/02/2011 04:35 AM Abraham Levkoy

Fixed ERC errors

Added some missing junctions and a missing label. Approved "no value"
warnings for parts for which a value would be nonsensical.
f6a93a04 11/02/2011 03:24 AM Abraham Levkoy

Started making kwoo's recommended changes

Made changes to charging circuit: Connected CLP to VIN on U1. Added
diodes to charge BOOST capacitor from battery and provide current
sensing inductor with outlet if power turns off (don't really understand
how the latter works). Adjusted inductor to 4.7uH after re-calculating...
aa3e7f85 11/01/2011 03:13 AM Abraham Levkoy

Update prefixes and names for two parts

Updated prefixes for DS2786 and MP1702 in kwoo.lbr to U so that Eagle
won't use the default prefix, U$, for them. Also manually updated names
in charging_test.{sch,brd}.
680676e5 10/27/2011 05:03 AM Abraham Levkoy

Added pullup resistors and an LED to power test

Added pullup resistors for I2C connections to power test board. Also
added a diagnostic LED to indicate when the AVR has power. Still
probably needs an ISP header and USB controller/port.
0d19b5ca 10/27/2011 04:20 AM Abraham Levkoy

First draft of power testing circuit schematic

Fleshed out power testing circuit. It is still missing a few things, and
I don't understand every little bit of it, but it probably won't look a
lot different when it's done. Added some passive components on the...
94e948f2 10/26/2011 11:59 PM Abraham Levkoy

Updated charging test circuit from kwoo library

Ran update command in charging_test.sch to update parts from kwoo.lbr.
acbd1e46 10/26/2011 10:27 PM Abraham Levkoy

Updated kwoo.lbr with previous kwoo changes

A few months ago, Kevin sent me a new version of kwoo.lbr. Updated
kwoo.lbr with these changes (using the Eagle update command). Also ran
update in scoutfly.sch. This did not affect the results of erc or drc
for scoutfly.
5a7bbf4c 10/26/2011 09:10 PM Yuyang Guo

fixing last 13 angle problem in drc

don't really know how to fix the last one.
worked on right bottom on both top layer and bottom layer

View revisions

Also available in: Atom