Project

General

Profile

Statistics
| Branch: | Revision:

root / scoutfly @ 680676e5

Latest revisions

# Date Author Comment
680676e5 10/27/2011 05:03 AM Abraham Levkoy

Added pullup resistors and an LED to power test

Added pullup resistors for I2C connections to power test board. Also
added a diagnostic LED to indicate when the AVR has power. Still
probably needs an ISP header and USB controller/port.

0d19b5ca 10/27/2011 04:20 AM Abraham Levkoy

First draft of power testing circuit schematic

Fleshed out power testing circuit. It is still missing a few things, and
I don't understand every little bit of it, but it probably won't look a
lot different when it's done. Added some passive components on the...

94e948f2 10/26/2011 11:59 PM Abraham Levkoy

Updated charging test circuit from kwoo library

Ran update command in charging_test.sch to update parts from kwoo.lbr.

acbd1e46 10/26/2011 10:27 PM Abraham Levkoy

Updated kwoo.lbr with previous kwoo changes

A few months ago, Kevin sent me a new version of kwoo.lbr. Updated
kwoo.lbr with these changes (using the Eagle update command). Also ran
update in scoutfly.sch. This did not affect the results of erc or drc
for scoutfly.

5a7bbf4c 10/26/2011 09:10 PM Yuyang Guo

fixing last 13 angle problem in drc

don't really know how to fix the last one.
worked on right bottom on both top layer and bottom layer

a433b5ff 10/23/2011 10:19 AM Yuyang Guo

solving some angle problems on scoutflu board

cf5c3070 10/22/2011 05:32 PM Thomas Mullins

Fixed some of the paths which are at unusual angles

ca0c1be9 10/22/2011 05:03 PM Yuyang Guo

fixing some of the angle problems in scoutfly.sch

6aece861 10/06/2011 05:28 PM Abraham Levkoy

Added kwoo's standalone charging schematic.

charging_test.sch is a standalone circuit schematic for a prototype to
test the charging circuit that will ultimately go on Scoutfly. kwoo
created it. It uses some new parts, but I don't know that much about it...

b68f4fd7 09/29/2011 10:13 PM Abraham Levkoy

Finished hooking up new gyroscope.

Connected pitch output of gyroscope to AVR and gave pitch an output LPF.
Added optional HPFs to both pitch and yaw outputs. We can just leave the
pads empty if we think they won't be useful.

To route the changes, had to squeeze some other stuff. Moved the AVR...

View revisions

Also available in: Atom