Charging Batteries

Quad1

  • Plug the white-tipped connector on the battery into the only slot it will fit into.
  • Connect the power cables.
  • Connect the charger power cable on the other side.
  • Confirm that the information on the screen is correct:
    • LiPo Battery
    • 2.0A, 11V
  • Hold "Start" until the charger beeps.
  • Once it has run a calibration loop, hit "Start" again to start charging.

Quad2

  • Connect the charger box to power, between 12 and 18 (?) volts
  • Turn on the charger box and navigate to the right setting (4S)
  • Connect the battery to the charger
  • Hold "Start" until the battery starts charging