root / arduino-1.0 / hardware / arduino / firmwares / arduino-usbserial / readme.txt @ 58d82c77
History | View | Annotate | Download (809 Bytes)
1 | 58d82c77 | Tom Mullins | To setup the project and upload the Arduino usbserial application firmware to an ATMEGA8U2 using the Arduino USB DFU bootloader: |
---|---|---|---|
2 | 1. unpack the source into LUFA's Projects directory |
||
3 | 2. set ARDUINO_MODEL_PID in the makefile as appropriate |
||
4 | 3. do "make clean; make" |
||
5 | 4. put the 8U2 into USB DFU mode: |
||
6 | 4.a. assert and hold the 8U2's RESET line |
||
7 | 4.b. assert and hold the 8U2's HWB line |
||
8 | 4.c. release the 8U2's RESET line |
||
9 | 4.d. release the 8U2's HWB line |
||
10 | 5. confirm that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU" |
||
11 | 6. do "make dfu" (OS X or Linux - dfu-programmer must be installed first) or "make flip" (Windows - Flip must be installed first) |
||
12 | |||
13 | Check that the board enumerates as either "Arduino Uno" or "Arduino Mega 2560". Test by uploading a new Arduino sketch from the Arduino IDE. |