root / arduino-1.0 / hardware / arduino / firmwares / arduino-usbdfu / readme.txt @ 58d82c77
History | View | Annotate | Download (434 Bytes)
1 | 58d82c77 | Tom Mullins | To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: |
---|---|---|---|
2 | 1. unpack the source into LUFA's Bootloader directory |
||
3 | 2. set ARDUINO_MODEL_PID in the makefile as appropriate |
||
4 | 3. do "make clean; make; make program" |
||
5 | |||
6 | Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) |