root / arduino-1.0 / hardware / arduino / bootloaders / optiboot / Makefile @ 58d82c77
History | View | Annotate | Download (12.9 KB)
1 | 58d82c77 | Tom Mullins | # Makefile for ATmegaBOOT |
---|---|---|---|
2 | # E.Lins, 18.7.2005 |
||
3 | # $Id$ |
||
4 | # |
||
5 | # Instructions |
||
6 | # |
||
7 | # To make bootloader .hex file: |
||
8 | # make diecimila |
||
9 | # make lilypad |
||
10 | # make ng |
||
11 | # etc... |
||
12 | # |
||
13 | # To burn bootloader .hex file: |
||
14 | # make diecimila_isp |
||
15 | # make lilypad_isp |
||
16 | # make ng_isp |
||
17 | # etc... |
||
18 | |||
19 | # program name should not be changed... |
||
20 | PROGRAM = optiboot |
||
21 | |||
22 | # The default behavior is to build using tools that are in the users |
||
23 | # current path variables, but we can also build using an installed |
||
24 | # Arduino user IDE setup, or the Arduino source tree. |
||
25 | # Uncomment this next lines to build within the arduino environment, |
||
26 | # using the arduino-included avrgcc toolset (mac and pc) |
||
27 | # ENV ?= arduino |
||
28 | # ENV ?= arduinodev |
||
29 | # OS ?= macosx |
||
30 | # OS ?= windows |
||
31 | |||
32 | |||
33 | # enter the parameters for the avrdude isp tool |
||
34 | ISPTOOL = stk500v2 |
||
35 | ISPPORT = usb |
||
36 | ISPSPEED = -b 115200 |
||
37 | |||
38 | MCU_TARGET = atmega168 |
||
39 | LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe |
||
40 | |||
41 | # Build environments |
||
42 | # Start of some ugly makefile-isms to allow optiboot to be built |
||
43 | # in several different environments. See the README.TXT file for |
||
44 | # details. |
||
45 | |||
46 | # default |
||
47 | fixpath = $(1) |
||
48 | |||
49 | ifeq ($(ENV), arduino) |
||
50 | # For Arduino, we assume that we're connected to the optiboot directory |
||
51 | # included with the arduino distribution, which means that the full set |
||
52 | # of avr-tools are "right up there" in standard places. |
||
53 | TOOLROOT = ../../../tools |
||
54 | GCCROOT = $(TOOLROOT)/avr/bin/ |
||
55 | AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf |
||
56 | |||
57 | ifeq ($(OS), windows) |
||
58 | # On windows, SOME of the tool paths will need to have backslashes instead |
||
59 | # of forward slashes (because they use windows cmd.exe for execution instead |
||
60 | # of a unix/mingw shell?) We also have to ensure that a consistent shell |
||
61 | # is used even if a unix shell is installed (ie as part of WINAVR) |
||
62 | fixpath = $(subst /,\,$1) |
||
63 | SHELL = cmd.exe |
||
64 | endif |
||
65 | |||
66 | else ifeq ($(ENV), arduinodev) |
||
67 | # Arduino IDE source code environment. Use the unpacked compilers created |
||
68 | # by the build (you'll need to do "ant build" first.) |
||
69 | ifeq ($(OS), macosx) |
||
70 | TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools |
||
71 | endif |
||
72 | ifeq ($(OS), windows) |
||
73 | TOOLROOT = ../../../../build/windows/work/hardware/tools |
||
74 | endif |
||
75 | |||
76 | GCCROOT = $(TOOLROOT)/avr/bin/ |
||
77 | AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf |
||
78 | |||
79 | else |
||
80 | GCCROOT = |
||
81 | AVRDUDE_CONF = |
||
82 | endif |
||
83 | # |
||
84 | # End of build environment code. |
||
85 | |||
86 | |||
87 | # the efuse should really be 0xf8; since, however, only the lower |
||
88 | # three bits of that byte are used on the atmega168, avrdude gets |
||
89 | # confused if you specify 1's for the higher bits, see: |
||
90 | # http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ |
||
91 | # |
||
92 | # similarly, the lock bits should be 0xff instead of 0x3f (to |
||
93 | # unlock the bootloader section) and 0xcf instead of 0x2f (to |
||
94 | # lock it), but since the high two bits of the lock byte are |
||
95 | # unused, avrdude would get confused. |
||
96 | |||
97 | ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ |
||
98 | -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ |
||
99 | -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \ |
||
100 | -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m |
||
101 | ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ |
||
102 | -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ |
||
103 | -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m |
||
104 | |||
105 | STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" |
||
106 | STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ |
||
107 | -lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt |
||
108 | STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt |
||
109 | |||
110 | OBJ = $(PROGRAM).o |
||
111 | OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls |
||
112 | |||
113 | DEFS = |
||
114 | LIBS = |
||
115 | |||
116 | CC = $(GCCROOT)avr-gcc |
||
117 | |||
118 | # Override is only needed by avr-lib build system. |
||
119 | |||
120 | override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) |
||
121 | override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib |
||
122 | |||
123 | OBJCOPY = $(GCCROOT)avr-objcopy |
||
124 | OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump) |
||
125 | |||
126 | SIZE = $(GCCROOT)avr-size |
||
127 | |||
128 | # Test platforms |
||
129 | # Virtual boot block test |
||
130 | virboot328: TARGET = atmega328 |
||
131 | virboot328: MCU_TARGET = atmega328p |
||
132 | virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT' |
||
133 | virboot328: AVR_FREQ = 16000000L |
||
134 | virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
||
135 | virboot328: $(PROGRAM)_atmega328.hex |
||
136 | virboot328: $(PROGRAM)_atmega328.lst |
||
137 | |||
138 | # 20MHz clocked platforms |
||
139 | # |
||
140 | # These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) |
||
141 | # |
||
142 | |||
143 | pro20: TARGET = pro_20mhz |
||
144 | pro20: MCU_TARGET = atmega168 |
||
145 | pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
146 | pro20: AVR_FREQ = 20000000L |
||
147 | pro20: $(PROGRAM)_pro_20mhz.hex |
||
148 | pro20: $(PROGRAM)_pro_20mhz.lst |
||
149 | |||
150 | pro20_isp: pro20 |
||
151 | pro20_isp: TARGET = pro_20mhz |
||
152 | # 2.7V brownout |
||
153 | pro20_isp: HFUSE = DD |
||
154 | # Full swing xtal (20MHz) 258CK/14CK+4.1ms |
||
155 | pro20_isp: LFUSE = C6 |
||
156 | # 512 byte boot |
||
157 | pro20_isp: EFUSE = 04 |
||
158 | pro20_isp: isp |
||
159 | |||
160 | # 16MHz clocked platforms |
||
161 | # |
||
162 | # These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) |
||
163 | # |
||
164 | |||
165 | pro16: TARGET = pro_16MHz |
||
166 | pro16: MCU_TARGET = atmega168 |
||
167 | pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
168 | pro16: AVR_FREQ = 16000000L |
||
169 | pro16: $(PROGRAM)_pro_16MHz.hex |
||
170 | pro16: $(PROGRAM)_pro_16MHz.lst |
||
171 | |||
172 | pro16_isp: pro16 |
||
173 | pro16_isp: TARGET = pro_16MHz |
||
174 | # 2.7V brownout |
||
175 | pro16_isp: HFUSE = DD |
||
176 | # Full swing xtal (20MHz) 258CK/14CK+4.1ms |
||
177 | pro16_isp: LFUSE = C6 |
||
178 | # 512 byte boot |
||
179 | pro16_isp: EFUSE = 04 |
||
180 | pro16_isp: isp |
||
181 | |||
182 | # Diecimila, Duemilanove with m168, and NG use identical bootloaders |
||
183 | # Call it "atmega168" for generality and clarity, keep "diecimila" for |
||
184 | # backward compatibility of makefile |
||
185 | # |
||
186 | atmega168: TARGET = atmega168 |
||
187 | atmega168: MCU_TARGET = atmega168 |
||
188 | atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
189 | atmega168: AVR_FREQ = 16000000L |
||
190 | atmega168: $(PROGRAM)_atmega168.hex |
||
191 | atmega168: $(PROGRAM)_atmega168.lst |
||
192 | |||
193 | atmega168_isp: atmega168 |
||
194 | atmega168_isp: TARGET = atmega168 |
||
195 | # 2.7V brownout |
||
196 | atmega168_isp: HFUSE = DD |
||
197 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
198 | atmega168_isp: LFUSE = FF |
||
199 | # 512 byte boot |
||
200 | atmega168_isp: EFUSE = 04 |
||
201 | atmega168_isp: isp |
||
202 | |||
203 | diecimila: TARGET = diecimila |
||
204 | diecimila: MCU_TARGET = atmega168 |
||
205 | diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
206 | diecimila: AVR_FREQ = 16000000L |
||
207 | diecimila: $(PROGRAM)_diecimila.hex |
||
208 | diecimila: $(PROGRAM)_diecimila.lst |
||
209 | |||
210 | diecimila_isp: diecimila |
||
211 | diecimila_isp: TARGET = diecimila |
||
212 | # 2.7V brownout |
||
213 | diecimila_isp: HFUSE = DD |
||
214 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
215 | diecimila_isp: LFUSE = FF |
||
216 | # 512 byte boot |
||
217 | diecimila_isp: EFUSE = 04 |
||
218 | diecimila_isp: isp |
||
219 | |||
220 | atmega328: TARGET = atmega328 |
||
221 | atmega328: MCU_TARGET = atmega328p |
||
222 | atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
223 | atmega328: AVR_FREQ = 16000000L |
||
224 | atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
||
225 | atmega328: $(PROGRAM)_atmega328.hex |
||
226 | atmega328: $(PROGRAM)_atmega328.lst |
||
227 | |||
228 | atmega328_isp: atmega328 |
||
229 | atmega328_isp: TARGET = atmega328 |
||
230 | atmega328_isp: MCU_TARGET = atmega328p |
||
231 | # 512 byte boot, SPIEN |
||
232 | atmega328_isp: HFUSE = DE |
||
233 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
234 | atmega328_isp: LFUSE = FF |
||
235 | # 2.7V brownout |
||
236 | atmega328_isp: EFUSE = 05 |
||
237 | atmega328_isp: isp |
||
238 | |||
239 | # Sanguino has a minimum boot size of 1024 bytes, so enable extra functions |
||
240 | # |
||
241 | sanguino: TARGET = atmega644p |
||
242 | sanguino: MCU_TARGET = atmega644p |
||
243 | sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' |
||
244 | sanguino: AVR_FREQ = 16000000L |
||
245 | sanguino: LDSECTIONS = -Wl,--section-start=.text=0xfc00 |
||
246 | sanguino: $(PROGRAM)_atmega644p.hex |
||
247 | sanguino: $(PROGRAM)_atmega644p.lst |
||
248 | |||
249 | sanguino_isp: sanguino |
||
250 | sanguino_isp: TARGET = atmega644p |
||
251 | sanguino_isp: MCU_TARGET = atmega644p |
||
252 | # 1024 byte boot |
||
253 | sanguino_isp: HFUSE = DE |
||
254 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
255 | sanguino_isp: LFUSE = FF |
||
256 | # 2.7V brownout |
||
257 | sanguino_isp: EFUSE = 05 |
||
258 | sanguino_isp: isp |
||
259 | |||
260 | # Mega has a minimum boot size of 1024 bytes, so enable extra functions |
||
261 | #mega: TARGET = atmega1280 |
||
262 | mega: MCU_TARGET = atmega1280 |
||
263 | mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' |
||
264 | mega: AVR_FREQ = 16000000L |
||
265 | mega: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 |
||
266 | mega: $(PROGRAM)_atmega1280.hex |
||
267 | mega: $(PROGRAM)_atmega1280.lst |
||
268 | |||
269 | mega_isp: mega |
||
270 | mega_isp: TARGET = atmega1280 |
||
271 | mega_isp: MCU_TARGET = atmega1280 |
||
272 | # 1024 byte boot |
||
273 | mega_isp: HFUSE = DE |
||
274 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
275 | mega_isp: LFUSE = FF |
||
276 | # 2.7V brownout |
||
277 | mega_isp: EFUSE = 05 |
||
278 | mega_isp: isp |
||
279 | |||
280 | # ATmega8 |
||
281 | # |
||
282 | atmega8: TARGET = atmega8 |
||
283 | atmega8: MCU_TARGET = atmega8 |
||
284 | atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
285 | atmega8: AVR_FREQ = 16000000L |
||
286 | atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe |
||
287 | atmega8: $(PROGRAM)_atmega8.hex |
||
288 | atmega8: $(PROGRAM)_atmega8.lst |
||
289 | |||
290 | atmega8_isp: atmega8 |
||
291 | atmega8_isp: TARGET = atmega8 |
||
292 | atmega8_isp: MCU_TARGET = atmega8 |
||
293 | # SPIEN, CKOPT, Bootsize=512B |
||
294 | atmega8_isp: HFUSE = CC |
||
295 | # 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms |
||
296 | atmega8_isp: LFUSE = BF |
||
297 | atmega8_isp: isp |
||
298 | |||
299 | # ATmega88 |
||
300 | # |
||
301 | atmega88: TARGET = atmega88 |
||
302 | atmega88: MCU_TARGET = atmega88 |
||
303 | atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
304 | atmega88: AVR_FREQ = 16000000L |
||
305 | atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe |
||
306 | atmega88: $(PROGRAM)_atmega88.hex |
||
307 | atmega88: $(PROGRAM)_atmega88.lst |
||
308 | |||
309 | atmega88_isp: atmega88 |
||
310 | atmega88_isp: TARGET = atmega88 |
||
311 | atmega88_isp: MCU_TARGET = atmega88 |
||
312 | # 2.7V brownout |
||
313 | atmega88_isp: HFUSE = DD |
||
314 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
315 | atemga88_isp: LFUSE = FF |
||
316 | # 512 byte boot |
||
317 | atmega88_isp: EFUSE = 04 |
||
318 | atmega88_isp: isp |
||
319 | |||
320 | |||
321 | # 8MHz clocked platforms |
||
322 | # |
||
323 | # These are capable of 115200 baud |
||
324 | # |
||
325 | |||
326 | lilypad: TARGET = lilypad |
||
327 | lilypad: MCU_TARGET = atmega168 |
||
328 | lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
329 | lilypad: AVR_FREQ = 8000000L |
||
330 | lilypad: $(PROGRAM)_lilypad.hex |
||
331 | lilypad: $(PROGRAM)_lilypad.lst |
||
332 | |||
333 | lilypad_isp: lilypad |
||
334 | lilypad_isp: TARGET = lilypad |
||
335 | # 2.7V brownout |
||
336 | lilypad_isp: HFUSE = DD |
||
337 | # Internal 8MHz osc (8MHz) Slow rising power |
||
338 | lilypad_isp: LFUSE = E2 |
||
339 | # 512 byte boot |
||
340 | lilypad_isp: EFUSE = 04 |
||
341 | lilypad_isp: isp |
||
342 | |||
343 | lilypad_resonator: TARGET = lilypad_resonator |
||
344 | lilypad_resonator: MCU_TARGET = atmega168 |
||
345 | lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
346 | lilypad_resonator: AVR_FREQ = 8000000L |
||
347 | lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex |
||
348 | lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst |
||
349 | |||
350 | lilypad_resonator_isp: lilypad_resonator |
||
351 | lilypad_resonator_isp: TARGET = lilypad_resonator |
||
352 | # 2.7V brownout |
||
353 | lilypad_resonator_isp: HFUSE = DD |
||
354 | # Full swing xtal (20MHz) 258CK/14CK+4.1ms |
||
355 | lilypad_resonator_isp: LFUSE = C6 |
||
356 | # 512 byte boot |
||
357 | lilypad_resonator_isp: EFUSE = 04 |
||
358 | lilypad_resonator_isp: isp |
||
359 | |||
360 | pro8: TARGET = pro_8MHz |
||
361 | pro8: MCU_TARGET = atmega168 |
||
362 | pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
363 | pro8: AVR_FREQ = 8000000L |
||
364 | pro8: $(PROGRAM)_pro_8MHz.hex |
||
365 | pro8: $(PROGRAM)_pro_8MHz.lst |
||
366 | |||
367 | pro8_isp: pro8 |
||
368 | pro8_isp: TARGET = pro_8MHz |
||
369 | # 2.7V brownout |
||
370 | pro8_isp: HFUSE = DD |
||
371 | # Full swing xtal (20MHz) 258CK/14CK+4.1ms |
||
372 | pro8_isp: LFUSE = C6 |
||
373 | # 512 byte boot |
||
374 | pro8_isp: EFUSE = 04 |
||
375 | pro8_isp: isp |
||
376 | |||
377 | atmega328_pro8: TARGET = atmega328_pro_8MHz |
||
378 | atmega328_pro8: MCU_TARGET = atmega328p |
||
379 | atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' |
||
380 | atmega328_pro8: AVR_FREQ = 8000000L |
||
381 | atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe |
||
382 | atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex |
||
383 | atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst |
||
384 | |||
385 | atmega328_pro8_isp: atmega328_pro8 |
||
386 | atmega328_pro8_isp: TARGET = atmega328_pro_8MHz |
||
387 | atmega328_pro8_isp: MCU_TARGET = atmega328p |
||
388 | # 512 byte boot, SPIEN |
||
389 | atmega328_pro8_isp: HFUSE = DE |
||
390 | # Low power xtal (16MHz) 16KCK/14CK+65ms |
||
391 | atmega328_pro8_isp: LFUSE = FF |
||
392 | # 2.7V brownout |
||
393 | atmega328_pro8_isp: EFUSE = 05 |
||
394 | atmega328_pro8_isp: isp |
||
395 | |||
396 | # 1MHz clocked platforms |
||
397 | # |
||
398 | # These are capable of 9600 baud |
||
399 | # |
||
400 | |||
401 | luminet: TARGET = luminet |
||
402 | luminet: MCU_TARGET = attiny84 |
||
403 | luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' |
||
404 | luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' |
||
405 | luminet: AVR_FREQ = 1000000L |
||
406 | luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe |
||
407 | luminet: $(PROGRAM)_luminet.hex |
||
408 | luminet: $(PROGRAM)_luminet.lst |
||
409 | |||
410 | luminet_isp: luminet |
||
411 | luminet_isp: TARGET = luminet |
||
412 | luminet_isp: MCU_TARGET = attiny84 |
||
413 | # Brownout disabled |
||
414 | luminet_isp: HFUSE = DF |
||
415 | # 1MHz internal oscillator, slowly rising power |
||
416 | luminet_isp: LFUSE = 62 |
||
417 | # Self-programming enable |
||
418 | luminet_isp: EFUSE = FE |
||
419 | luminet_isp: isp |
||
420 | |||
421 | # |
||
422 | # Generic build instructions |
||
423 | # |
||
424 | # |
||
425 | |||
426 | isp: $(TARGET) |
||
427 | $(ISPFUSES) |
||
428 | $(ISPFLASH) |
||
429 | |||
430 | isp-stk500: $(PROGRAM)_$(TARGET).hex |
||
431 | $(STK500-1) |
||
432 | $(STK500-2) |
||
433 | |||
434 | %.elf: $(OBJ) |
||
435 | $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) |
||
436 | $(SIZE) $@ |
||
437 | |||
438 | clean: |
||
439 | rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex |
||
440 | |||
441 | %.lst: %.elf |
||
442 | $(OBJDUMP) -h -S $< > $@ |
||
443 | |||
444 | %.hex: %.elf |
||
445 | $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@ |
||
446 | |||
447 | %.srec: %.elf |
||
448 | $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@ |
||
449 | |||
450 | %.bin: %.elf |
||
451 | $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@ |