Statistics
| Branch: | Revision:

scoutos / scout / Doxyfile @ bc943bf6

History | View | Annotate | Download (69 KB)

1
# Doxyfile 1.7.3
2

    
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project.
5
#
6
# All text after a hash (#) is considered a comment and will be ignored.
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ").
12

    
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16

    
17
# This tag specifies the encoding used for all characters in the config file
18
# that follow. The default is UTF-8 which is also the encoding used for all
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20
# iconv built into libc) for the transcoding. See
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22

    
23
DOXYFILE_ENCODING      = UTF-8
24

    
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26
# by quotes) that should identify the project.
27

    
28
PROJECT_NAME           = Colony Scout
29

    
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31
# This could be handy for archiving the generated documentation or
32
# if some version control system is used.
33

    
34
PROJECT_NUMBER         = 1.0
35

    
36
# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
37

    
38
PROJECT_BRIEF          = "The Colony Scout Operating System"
39

    
40
# With the PROJECT_LOGO tag one can specify an logo or icon that is
41
# included in the documentation. The maximum height of the logo should not
42
# exceed 55 pixels and the maximum width should not exceed 200 pixels.
43
# Doxygen will copy the logo to the output directory.
44

    
45
PROJECT_LOGO           =
46

    
47
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
48
# base path where the generated documentation will be put.
49
# If a relative path is entered, it will be relative to the location
50
# where doxygen was started. If left blank the current directory will be used.
51

    
52
OUTPUT_DIRECTORY       = docs
53

    
54
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
55
# 4096 sub-directories (in 2 levels) under the output directory of each output
56
# format and will distribute the generated files over these directories.
57
# Enabling this option can be useful when feeding doxygen a huge amount of
58
# source files, where putting all generated files in the same directory would
59
# otherwise cause performance problems for the file system.
60

    
61
CREATE_SUBDIRS         = NO
62

    
63
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
64
# documentation generated by doxygen is written. Doxygen will use this
65
# information to generate all constant output in the proper language.
66
# The default language is English, other supported languages are:
67
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
68
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
69
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
70
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
71
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
72
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
73

    
74
OUTPUT_LANGUAGE        = English
75

    
76
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
77
# include brief member descriptions after the members that are listed in
78
# the file and class documentation (similar to JavaDoc).
79
# Set to NO to disable this.
80

    
81
BRIEF_MEMBER_DESC      = YES
82

    
83
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
84
# the brief description of a member or function before the detailed description.
85
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
86
# brief descriptions will be completely suppressed.
87

    
88
REPEAT_BRIEF           = YES
89

    
90
# This tag implements a quasi-intelligent brief description abbreviator
91
# that is used to form the text in various listings. Each string
92
# in this list, if found as the leading text of the brief description, will be
93
# stripped from the text and the result after processing the whole list, is
94
# used as the annotated text. Otherwise, the brief description is used as-is.
95
# If left blank, the following values are used ("$name" is automatically
96
# replaced with the name of the entity): "The $name class" "The $name widget"
97
# "The $name file" "is" "provides" "specifies" "contains"
98
# "represents" "a" "an" "the"
99

    
100
ABBREVIATE_BRIEF       =
101

    
102
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
103
# Doxygen will generate a detailed section even if there is only a brief
104
# description.
105

    
106
ALWAYS_DETAILED_SEC    = NO
107

    
108
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
109
# inherited members of a class in the documentation of that class as if those
110
# members were ordinary class members. Constructors, destructors and assignment
111
# operators of the base classes will not be shown.
112

    
113
INLINE_INHERITED_MEMB  = NO
114

    
115
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
116
# path before files name in the file list and in the header files. If set
117
# to NO the shortest path that makes the file name unique will be used.
118

    
119
FULL_PATH_NAMES        = YES
120

    
121
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
122
# can be used to strip a user-defined part of the path. Stripping is
123
# only done if one of the specified strings matches the left-hand part of
124
# the path. The tag can be used to show relative paths in the file list.
125
# If left blank the directory from which doxygen is run is used as the
126
# path to strip.
127

    
128
STRIP_FROM_PATH        =
129

    
130
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
131
# the path mentioned in the documentation of a class, which tells
132
# the reader which header file to include in order to use a class.
133
# If left blank only the name of the header file containing the class
134
# definition is used. Otherwise one should specify the include paths that
135
# are normally passed to the compiler using the -I flag.
136

    
137
STRIP_FROM_INC_PATH    =
138

    
139
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
140
# (but less readable) file names. This can be useful if your file system
141
# doesn't support long names like on DOS, Mac, or CD-ROM.
142

    
143
SHORT_NAMES            = NO
144

    
145
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
146
# will interpret the first line (until the first dot) of a JavaDoc-style
147
# comment as the brief description. If set to NO, the JavaDoc
148
# comments will behave just like regular Qt-style comments
149
# (thus requiring an explicit @brief command for a brief description.)
150

    
151
JAVADOC_AUTOBRIEF      = NO
152

    
153
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
154
# interpret the first line (until the first dot) of a Qt-style
155
# comment as the brief description. If set to NO, the comments
156
# will behave just like regular Qt-style comments (thus requiring
157
# an explicit \brief command for a brief description.)
158

    
159
QT_AUTOBRIEF           = NO
160

    
161
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
162
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
163
# comments) as a brief description. This used to be the default behaviour.
164
# The new default is to treat a multi-line C++ comment block as a detailed
165
# description. Set this tag to YES if you prefer the old behaviour instead.
166

    
167
MULTILINE_CPP_IS_BRIEF = NO
168

    
169
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
170
# member inherits the documentation from any documented member that it
171
# re-implements.
172

    
173
INHERIT_DOCS           = YES
174

    
175
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
176
# a new page for each member. If set to NO, the documentation of a member will
177
# be part of the file/class/namespace that contains it.
178

    
179
SEPARATE_MEMBER_PAGES  = NO
180

    
181
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
182
# Doxygen uses this value to replace tabs by spaces in code fragments.
183

    
184
TAB_SIZE               = 8
185

    
186
# This tag can be used to specify a number of aliases that acts
187
# as commands in the documentation. An alias has the form "name=value".
188
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
189
# put the command \sideeffect (or @sideeffect) in the documentation, which
190
# will result in a user-defined paragraph with heading "Side Effects:".
191
# You can put \n's in the value part of an alias to insert newlines.
192

    
193
ALIASES                =
194

    
195
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
196
# sources only. Doxygen will then generate output that is more tailored for C.
197
# For instance, some of the names that are used will be different. The list
198
# of all members will be omitted, etc.
199

    
200
OPTIMIZE_OUTPUT_FOR_C  = NO
201

    
202
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
203
# sources only. Doxygen will then generate output that is more tailored for
204
# Java. For instance, namespaces will be presented as packages, qualified
205
# scopes will look different, etc.
206

    
207
OPTIMIZE_OUTPUT_JAVA   = NO
208

    
209
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
210
# sources only. Doxygen will then generate output that is more tailored for
211
# Fortran.
212

    
213
OPTIMIZE_FOR_FORTRAN   = NO
214

    
215
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
216
# sources. Doxygen will then generate output that is tailored for
217
# VHDL.
218

    
219
OPTIMIZE_OUTPUT_VHDL   = NO
220

    
221
# Doxygen selects the parser to use depending on the extension of the files it
222
# parses. With this tag you can assign which parser to use for a given extension.
223
# Doxygen has a built-in mapping, but you can override or extend it using this
224
# tag. The format is ext=language, where ext is a file extension, and language
225
# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
226
# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
227
# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
228
# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
229
# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
230

    
231
EXTENSION_MAPPING      =
232

    
233
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
234
# to include (a tag file for) the STL sources as input, then you should
235
# set this tag to YES in order to let doxygen match functions declarations and
236
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
237
# func(std::string) {}). This also makes the inheritance and collaboration
238
# diagrams that involve STL classes more complete and accurate.
239

    
240
BUILTIN_STL_SUPPORT    = NO
241

    
242
# If you use Microsoft's C++/CLI language, you should set this option to YES to
243
# enable parsing support.
244

    
245
CPP_CLI_SUPPORT        = NO
246

    
247
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
248
# Doxygen will parse them like normal C++ but will assume all classes use public
249
# instead of private inheritance when no explicit protection keyword is present.
250

    
251
SIP_SUPPORT            = NO
252

    
253
# For Microsoft's IDL there are propget and propput attributes to indicate getter
254
# and setter methods for a property. Setting this option to YES (the default)
255
# will make doxygen replace the get and set methods by a property in the
256
# documentation. This will only work if the methods are indeed getting or
257
# setting a simple type. If this is not the case, or you want to show the
258
# methods anyway, you should set this option to NO.
259

    
260
IDL_PROPERTY_SUPPORT   = YES
261

    
262
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
263
# tag is set to YES, then doxygen will reuse the documentation of the first
264
# member in the group (if any) for the other members of the group. By default
265
# all members of a group must be documented explicitly.
266

    
267
DISTRIBUTE_GROUP_DOC   = NO
268

    
269
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
270
# the same type (for instance a group of public functions) to be put as a
271
# subgroup of that type (e.g. under the Public Functions section). Set it to
272
# NO to prevent subgrouping. Alternatively, this can be done per class using
273
# the \nosubgrouping command.
274

    
275
SUBGROUPING            = YES
276

    
277
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
278
# is documented as struct, union, or enum with the name of the typedef. So
279
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
280
# with name TypeT. When disabled the typedef will appear as a member of a file,
281
# namespace, or class. And the struct will be named TypeS. This can typically
282
# be useful for C code in case the coding convention dictates that all compound
283
# types are typedef'ed and only the typedef is referenced, never the tag name.
284

    
285
TYPEDEF_HIDES_STRUCT   = NO
286

    
287
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
288
# determine which symbols to keep in memory and which to flush to disk.
289
# When the cache is full, less often used symbols will be written to disk.
290
# For small to medium size projects (<1000 input files) the default value is
291
# probably good enough. For larger projects a too small cache size can cause
292
# doxygen to be busy swapping symbols to and from disk most of the time
293
# causing a significant performance penalty.
294
# If the system has enough physical memory increasing the cache will improve the
295
# performance by keeping more symbols in memory. Note that the value works on
296
# a logarithmic scale so increasing the size by one will roughly double the
297
# memory usage. The cache size is given by this formula:
298
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
299
# corresponding to a cache size of 2^16 = 65536 symbols
300

    
301
SYMBOL_CACHE_SIZE      = 0
302

    
303
#---------------------------------------------------------------------------
304
# Build related configuration options
305
#---------------------------------------------------------------------------
306

    
307
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
308
# documentation are documented, even if no documentation was available.
309
# Private class members and static file members will be hidden unless
310
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
311

    
312
EXTRACT_ALL            = NO
313

    
314
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
315
# will be included in the documentation.
316

    
317
EXTRACT_PRIVATE        = NO
318

    
319
# If the EXTRACT_STATIC tag is set to YES all static members of a file
320
# will be included in the documentation.
321

    
322
EXTRACT_STATIC         = NO
323

    
324
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
325
# defined locally in source files will be included in the documentation.
326
# If set to NO only classes defined in header files are included.
327

    
328
EXTRACT_LOCAL_CLASSES  = YES
329

    
330
# This flag is only useful for Objective-C code. When set to YES local
331
# methods, which are defined in the implementation section but not in
332
# the interface are included in the documentation.
333
# If set to NO (the default) only methods in the interface are included.
334

    
335
EXTRACT_LOCAL_METHODS  = NO
336

    
337
# If this flag is set to YES, the members of anonymous namespaces will be
338
# extracted and appear in the documentation as a namespace called
339
# 'anonymous_namespace{file}', where file will be replaced with the base
340
# name of the file that contains the anonymous namespace. By default
341
# anonymous namespaces are hidden.
342

    
343
EXTRACT_ANON_NSPACES   = NO
344

    
345
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
346
# undocumented members of documented classes, files or namespaces.
347
# If set to NO (the default) these members will be included in the
348
# various overviews, but no documentation section is generated.
349
# This option has no effect if EXTRACT_ALL is enabled.
350

    
351
HIDE_UNDOC_MEMBERS     = NO
352

    
353
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
354
# undocumented classes that are normally visible in the class hierarchy.
355
# If set to NO (the default) these classes will be included in the various
356
# overviews. This option has no effect if EXTRACT_ALL is enabled.
357

    
358
HIDE_UNDOC_CLASSES     = NO
359

    
360
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
361
# friend (class|struct|union) declarations.
362
# If set to NO (the default) these declarations will be included in the
363
# documentation.
364

    
365
HIDE_FRIEND_COMPOUNDS  = NO
366

    
367
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
368
# documentation blocks found inside the body of a function.
369
# If set to NO (the default) these blocks will be appended to the
370
# function's detailed documentation block.
371

    
372
HIDE_IN_BODY_DOCS      = NO
373

    
374
# The INTERNAL_DOCS tag determines if documentation
375
# that is typed after a \internal command is included. If the tag is set
376
# to NO (the default) then the documentation will be excluded.
377
# Set it to YES to include the internal documentation.
378

    
379
INTERNAL_DOCS          = NO
380

    
381
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
382
# file names in lower-case letters. If set to YES upper-case letters are also
383
# allowed. This is useful if you have classes or files whose names only differ
384
# in case and if your file system supports case sensitive file names. Windows
385
# and Mac users are advised to set this option to NO.
386

    
387
CASE_SENSE_NAMES       = YES
388

    
389
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
390
# will show members with their full class and namespace scopes in the
391
# documentation. If set to YES the scope will be hidden.
392

    
393
HIDE_SCOPE_NAMES       = NO
394

    
395
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
396
# will put a list of the files that are included by a file in the documentation
397
# of that file.
398

    
399
SHOW_INCLUDE_FILES     = YES
400

    
401
# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
402
# will list include files with double quotes in the documentation
403
# rather than with sharp brackets.
404

    
405
FORCE_LOCAL_INCLUDES   = NO
406

    
407
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
408
# is inserted in the documentation for inline members.
409

    
410
INLINE_INFO            = YES
411

    
412
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
413
# will sort the (detailed) documentation of file and class members
414
# alphabetically by member name. If set to NO the members will appear in
415
# declaration order.
416

    
417
SORT_MEMBER_DOCS       = YES
418

    
419
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
420
# brief documentation of file, namespace and class members alphabetically
421
# by member name. If set to NO (the default) the members will appear in
422
# declaration order.
423

    
424
SORT_BRIEF_DOCS        = NO
425

    
426
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
427
# will sort the (brief and detailed) documentation of class members so that
428
# constructors and destructors are listed first. If set to NO (the default)
429
# the constructors will appear in the respective orders defined by
430
# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
431
# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
432
# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
433

    
434
SORT_MEMBERS_CTORS_1ST = NO
435

    
436
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
437
# hierarchy of group names into alphabetical order. If set to NO (the default)
438
# the group names will appear in their defined order.
439

    
440
SORT_GROUP_NAMES       = NO
441

    
442
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
443
# sorted by fully-qualified names, including namespaces. If set to
444
# NO (the default), the class list will be sorted only by class name,
445
# not including the namespace part.
446
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
447
# Note: This option applies only to the class list, not to the
448
# alphabetical list.
449

    
450
SORT_BY_SCOPE_NAME     = NO
451

    
452
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
453
# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
454
# will still accept a match between prototype and implementation in such cases.
455

    
456
STRICT_PROTO_MATCHING  = NO
457

    
458
# The GENERATE_TODOLIST tag can be used to enable (YES) or
459
# disable (NO) the todo list. This list is created by putting \todo
460
# commands in the documentation.
461

    
462
GENERATE_TODOLIST      = YES
463

    
464
# The GENERATE_TESTLIST tag can be used to enable (YES) or
465
# disable (NO) the test list. This list is created by putting \test
466
# commands in the documentation.
467

    
468
GENERATE_TESTLIST      = YES
469

    
470
# The GENERATE_BUGLIST tag can be used to enable (YES) or
471
# disable (NO) the bug list. This list is created by putting \bug
472
# commands in the documentation.
473

    
474
GENERATE_BUGLIST       = YES
475

    
476
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
477
# disable (NO) the deprecated list. This list is created by putting
478
# \deprecated commands in the documentation.
479

    
480
GENERATE_DEPRECATEDLIST= YES
481

    
482
# The ENABLED_SECTIONS tag can be used to enable conditional
483
# documentation sections, marked by \if sectionname ... \endif.
484

    
485
ENABLED_SECTIONS       =
486

    
487
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
488
# the initial value of a variable or macro consists of for it to appear in
489
# the documentation. If the initializer consists of more lines than specified
490
# here it will be hidden. Use a value of 0 to hide initializers completely.
491
# The appearance of the initializer of individual variables and macros in the
492
# documentation can be controlled using \showinitializer or \hideinitializer
493
# command in the documentation regardless of this setting.
494

    
495
MAX_INITIALIZER_LINES  = 30
496

    
497
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
498
# at the bottom of the documentation of classes and structs. If set to YES the
499
# list will mention the files that were used to generate the documentation.
500

    
501
SHOW_USED_FILES        = YES
502

    
503
# If the sources in your project are distributed over multiple directories
504
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
505
# in the documentation. The default is NO.
506

    
507
SHOW_DIRECTORIES       = NO
508

    
509
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
510
# This will remove the Files entry from the Quick Index and from the
511
# Folder Tree View (if specified). The default is YES.
512

    
513
SHOW_FILES             = YES
514

    
515
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
516
# Namespaces page.
517
# This will remove the Namespaces entry from the Quick Index
518
# and from the Folder Tree View (if specified). The default is YES.
519

    
520
SHOW_NAMESPACES        = YES
521

    
522
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
523
# doxygen should invoke to get the current version for each file (typically from
524
# the version control system). Doxygen will invoke the program by executing (via
525
# popen()) the command <command> <input-file>, where <command> is the value of
526
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
527
# provided by doxygen. Whatever the program writes to standard output
528
# is used as the file version. See the manual for examples.
529

    
530
FILE_VERSION_FILTER    =
531

    
532
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
533
# by doxygen. The layout file controls the global structure of the generated
534
# output files in an output format independent way. The create the layout file
535
# that represents doxygen's defaults, run doxygen with the -l option.
536
# You can optionally specify a file name after the option, if omitted
537
# DoxygenLayout.xml will be used as the name of the layout file.
538

    
539
LAYOUT_FILE            =
540

    
541
#---------------------------------------------------------------------------
542
# configuration options related to warning and progress messages
543
#---------------------------------------------------------------------------
544

    
545
# The QUIET tag can be used to turn on/off the messages that are generated
546
# by doxygen. Possible values are YES and NO. If left blank NO is used.
547

    
548
QUIET                  = NO
549

    
550
# The WARNINGS tag can be used to turn on/off the warning messages that are
551
# generated by doxygen. Possible values are YES and NO. If left blank
552
# NO is used.
553

    
554
WARNINGS               = YES
555

    
556
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
557
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
558
# automatically be disabled.
559

    
560
WARN_IF_UNDOCUMENTED   = YES
561

    
562
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
563
# potential errors in the documentation, such as not documenting some
564
# parameters in a documented function, or documenting parameters that
565
# don't exist or using markup commands wrongly.
566

    
567
WARN_IF_DOC_ERROR      = YES
568

    
569
# The WARN_NO_PARAMDOC option can be enabled to get warnings for
570
# functions that are documented, but have no documentation for their parameters
571
# or return value. If set to NO (the default) doxygen will only warn about
572
# wrong or incomplete parameter documentation, but not about the absence of
573
# documentation.
574

    
575
WARN_NO_PARAMDOC       = NO
576

    
577
# The WARN_FORMAT tag determines the format of the warning messages that
578
# doxygen can produce. The string should contain the $file, $line, and $text
579
# tags, which will be replaced by the file and line number from which the
580
# warning originated and the warning text. Optionally the format may contain
581
# $version, which will be replaced by the version of the file (if it could
582
# be obtained via FILE_VERSION_FILTER)
583

    
584
WARN_FORMAT            = "$file:$line: $text"
585

    
586
# The WARN_LOGFILE tag can be used to specify a file to which warning
587
# and error messages should be written. If left blank the output is written
588
# to stderr.
589

    
590
WARN_LOGFILE           =
591

    
592
#---------------------------------------------------------------------------
593
# configuration options related to the input files
594
#---------------------------------------------------------------------------
595

    
596
# The INPUT tag can be used to specify the files and/or directories that contain
597
# documented source files. You may enter file names like "myfile.cpp" or
598
# directories like "/usr/src/myproject". Separate the files or directories
599
# with spaces.
600

    
601
INPUT                  =
602

    
603
# This tag can be used to specify the character encoding of the source files
604
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
605
# also the default input encoding. Doxygen uses libiconv (or the iconv built
606
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
607
# the list of possible encodings.
608

    
609
INPUT_ENCODING         = UTF-8
610

    
611
# If the value of the INPUT tag contains directories, you can use the
612
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
613
# and *.h) to filter out the source-files in the directories. If left
614
# blank the following patterns are tested:
615
# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
616
# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
617
# *.f90 *.f *.for *.vhd *.vhdl
618

    
619
FILE_PATTERNS          =
620

    
621
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
622
# should be searched for input files as well. Possible values are YES and NO.
623
# If left blank NO is used.
624

    
625
RECURSIVE              = YES
626

    
627
# The EXCLUDE tag can be used to specify files and/or directories that should
628
# excluded from the INPUT source files. This way you can easily exclude a
629
# subdirectory from a directory tree whose root is specified with the INPUT tag.
630

    
631
EXCLUDE                =
632

    
633
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
634
# directories that are symbolic links (a Unix file system feature) are excluded
635
# from the input.
636

    
637
EXCLUDE_SYMLINKS       = NO
638

    
639
# If the value of the INPUT tag contains directories, you can use the
640
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
641
# certain files from those directories. Note that the wildcards are matched
642
# against the file with absolute path, so to exclude all test directories
643
# for example use the pattern */test/*
644

    
645
EXCLUDE_PATTERNS       =
646

    
647
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
648
# (namespaces, classes, functions, etc.) that should be excluded from the
649
# output. The symbol name can be a fully qualified name, a word, or if the
650
# wildcard * is used, a substring. Examples: ANamespace, AClass,
651
# AClass::ANamespace, ANamespace::*Test
652

    
653
EXCLUDE_SYMBOLS        =
654

    
655
# The EXAMPLE_PATH tag can be used to specify one or more files or
656
# directories that contain example code fragments that are included (see
657
# the \include command).
658

    
659
EXAMPLE_PATH           =
660

    
661
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
662
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
663
# and *.h) to filter out the source-files in the directories. If left
664
# blank all files are included.
665

    
666
EXAMPLE_PATTERNS       =
667

    
668
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
669
# searched for input files to be used with the \include or \dontinclude
670
# commands irrespective of the value of the RECURSIVE tag.
671
# Possible values are YES and NO. If left blank NO is used.
672

    
673
EXAMPLE_RECURSIVE      = NO
674

    
675
# The IMAGE_PATH tag can be used to specify one or more files or
676
# directories that contain image that are included in the documentation (see
677
# the \image command).
678

    
679
IMAGE_PATH             =
680

    
681
# The INPUT_FILTER tag can be used to specify a program that doxygen should
682
# invoke to filter for each input file. Doxygen will invoke the filter program
683
# by executing (via popen()) the command <filter> <input-file>, where <filter>
684
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
685
# input file. Doxygen will then use the output that the filter program writes
686
# to standard output.
687
# If FILTER_PATTERNS is specified, this tag will be
688
# ignored.
689

    
690
INPUT_FILTER           =
691

    
692
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
693
# basis.
694
# Doxygen will compare the file name with each pattern and apply the
695
# filter if there is a match.
696
# The filters are a list of the form:
697
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
698
# info on how filters are used. If FILTER_PATTERNS is empty or if
699
# non of the patterns match the file name, INPUT_FILTER is applied.
700

    
701
FILTER_PATTERNS        =
702

    
703
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
704
# INPUT_FILTER) will be used to filter the input files when producing source
705
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
706

    
707
FILTER_SOURCE_FILES    = NO
708

    
709
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
710
# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
711
# and it is also possible to disable source filtering for a specific pattern
712
# using *.ext= (so without naming a filter). This option only has effect when
713
# FILTER_SOURCE_FILES is enabled.
714

    
715
FILTER_SOURCE_PATTERNS =
716

    
717
#---------------------------------------------------------------------------
718
# configuration options related to source browsing
719
#---------------------------------------------------------------------------
720

    
721
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
722
# be generated. Documented entities will be cross-referenced with these sources.
723
# Note: To get rid of all source code in the generated output, make sure also
724
# VERBATIM_HEADERS is set to NO.
725

    
726
SOURCE_BROWSER         = NO
727

    
728
# Setting the INLINE_SOURCES tag to YES will include the body
729
# of functions and classes directly in the documentation.
730

    
731
INLINE_SOURCES         = NO
732

    
733
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
734
# doxygen to hide any special comment blocks from generated source code
735
# fragments. Normal C and C++ comments will always remain visible.
736

    
737
STRIP_CODE_COMMENTS    = YES
738

    
739
# If the REFERENCED_BY_RELATION tag is set to YES
740
# then for each documented function all documented
741
# functions referencing it will be listed.
742

    
743
REFERENCED_BY_RELATION = NO
744

    
745
# If the REFERENCES_RELATION tag is set to YES
746
# then for each documented function all documented entities
747
# called/used by that function will be listed.
748

    
749
REFERENCES_RELATION    = NO
750

    
751
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
752
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
753
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
754
# link to the source code.
755
# Otherwise they will link to the documentation.
756

    
757
REFERENCES_LINK_SOURCE = YES
758

    
759
# If the USE_HTAGS tag is set to YES then the references to source code
760
# will point to the HTML generated by the htags(1) tool instead of doxygen
761
# built-in source browser. The htags tool is part of GNU's global source
762
# tagging system (see http://www.gnu.org/software/global/global.html). You
763
# will need version 4.8.6 or higher.
764

    
765
USE_HTAGS              = NO
766

    
767
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
768
# will generate a verbatim copy of the header file for each class for
769
# which an include is specified. Set to NO to disable this.
770

    
771
VERBATIM_HEADERS       = YES
772

    
773
#---------------------------------------------------------------------------
774
# configuration options related to the alphabetical class index
775
#---------------------------------------------------------------------------
776

    
777
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
778
# of all compounds will be generated. Enable this if the project
779
# contains a lot of classes, structs, unions or interfaces.
780

    
781
ALPHABETICAL_INDEX     = YES
782

    
783
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
784
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
785
# in which this list will be split (can be a number in the range [1..20])
786

    
787
COLS_IN_ALPHA_INDEX    = 5
788

    
789
# In case all classes in a project start with a common prefix, all
790
# classes will be put under the same header in the alphabetical index.
791
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
792
# should be ignored while generating the index headers.
793

    
794
IGNORE_PREFIX          =
795

    
796
#---------------------------------------------------------------------------
797
# configuration options related to the HTML output
798
#---------------------------------------------------------------------------
799

    
800
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
801
# generate HTML output.
802

    
803
GENERATE_HTML          = YES
804

    
805
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
806
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
807
# put in front of it. If left blank `html' will be used as the default path.
808

    
809
HTML_OUTPUT            = html
810

    
811
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
812
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
813
# doxygen will generate files with .html extension.
814

    
815
HTML_FILE_EXTENSION    = .html
816

    
817
# The HTML_HEADER tag can be used to specify a personal HTML header for
818
# each generated HTML page. If it is left blank doxygen will generate a
819
# standard header.
820

    
821
HTML_HEADER            =
822

    
823
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
824
# each generated HTML page. If it is left blank doxygen will generate a
825
# standard footer.
826

    
827
HTML_FOOTER            =
828

    
829
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
830
# style sheet that is used by each HTML page. It can be used to
831
# fine-tune the look of the HTML output. If the tag is left blank doxygen
832
# will generate a default style sheet. Note that doxygen will try to copy
833
# the style sheet file to the HTML output directory, so don't put your own
834
# stylesheet in the HTML output directory as well, or it will be erased!
835

    
836
HTML_STYLESHEET        =
837

    
838
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
839
# Doxygen will adjust the colors in the stylesheet and background images
840
# according to this color. Hue is specified as an angle on a colorwheel,
841
# see http://en.wikipedia.org/wiki/Hue for more information.
842
# For instance the value 0 represents red, 60 is yellow, 120 is green,
843
# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
844
# The allowed range is 0 to 359.
845

    
846
HTML_COLORSTYLE_HUE    = 220
847

    
848
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
849
# the colors in the HTML output. For a value of 0 the output will use
850
# grayscales only. A value of 255 will produce the most vivid colors.
851

    
852
HTML_COLORSTYLE_SAT    = 100
853

    
854
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
855
# the luminance component of the colors in the HTML output. Values below
856
# 100 gradually make the output lighter, whereas values above 100 make
857
# the output darker. The value divided by 100 is the actual gamma applied,
858
# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
859
# and 100 does not change the gamma.
860

    
861
HTML_COLORSTYLE_GAMMA  = 80
862

    
863
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
864
# page will contain the date and time when the page was generated. Setting
865
# this to NO can help when comparing the output of multiple runs.
866

    
867
HTML_TIMESTAMP         = YES
868

    
869
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
870
# files or namespaces will be aligned in HTML using tables. If set to
871
# NO a bullet list will be used.
872

    
873
HTML_ALIGN_MEMBERS     = YES
874

    
875
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
876
# documentation will contain sections that can be hidden and shown after the
877
# page has loaded. For this to work a browser that supports
878
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
879
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
880

    
881
HTML_DYNAMIC_SECTIONS  = NO
882

    
883
# If the GENERATE_DOCSET tag is set to YES, additional index files
884
# will be generated that can be used as input for Apple's Xcode 3
885
# integrated development environment, introduced with OSX 10.5 (Leopard).
886
# To create a documentation set, doxygen will generate a Makefile in the
887
# HTML output directory. Running make will produce the docset in that
888
# directory and running "make install" will install the docset in
889
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
890
# it at startup.
891
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
892
# for more information.
893

    
894
GENERATE_DOCSET        = NO
895

    
896
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
897
# feed. A documentation feed provides an umbrella under which multiple
898
# documentation sets from a single provider (such as a company or product suite)
899
# can be grouped.
900

    
901
DOCSET_FEEDNAME        = "Doxygen generated docs"
902

    
903
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
904
# should uniquely identify the documentation set bundle. This should be a
905
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
906
# will append .docset to the name.
907

    
908
DOCSET_BUNDLE_ID       = org.doxygen.Project
909

    
910
# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
911
# the documentation publisher. This should be a reverse domain-name style
912
# string, e.g. com.mycompany.MyDocSet.documentation.
913

    
914
DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
915

    
916
# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
917

    
918
DOCSET_PUBLISHER_NAME  = Publisher
919

    
920
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
921
# will be generated that can be used as input for tools like the
922
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
923
# of the generated HTML documentation.
924

    
925
GENERATE_HTMLHELP      = NO
926

    
927
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
928
# be used to specify the file name of the resulting .chm file. You
929
# can add a path in front of the file if the result should not be
930
# written to the html output directory.
931

    
932
CHM_FILE               =
933

    
934
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
935
# be used to specify the location (absolute path including file name) of
936
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
937
# the HTML help compiler on the generated index.hhp.
938

    
939
HHC_LOCATION           =
940

    
941
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
942
# controls if a separate .chi index file is generated (YES) or that
943
# it should be included in the master .chm file (NO).
944

    
945
GENERATE_CHI           = NO
946

    
947
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
948
# is used to encode HtmlHelp index (hhk), content (hhc) and project file
949
# content.
950

    
951
CHM_INDEX_ENCODING     =
952

    
953
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
954
# controls whether a binary table of contents is generated (YES) or a
955
# normal table of contents (NO) in the .chm file.
956

    
957
BINARY_TOC             = NO
958

    
959
# The TOC_EXPAND flag can be set to YES to add extra items for group members
960
# to the contents of the HTML help documentation and to the tree view.
961

    
962
TOC_EXPAND             = NO
963

    
964
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
965
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
966
# that can be used as input for Qt's qhelpgenerator to generate a
967
# Qt Compressed Help (.qch) of the generated HTML documentation.
968

    
969
GENERATE_QHP           = NO
970

    
971
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
972
# be used to specify the file name of the resulting .qch file.
973
# The path specified is relative to the HTML output folder.
974

    
975
QCH_FILE               =
976

    
977
# The QHP_NAMESPACE tag specifies the namespace to use when generating
978
# Qt Help Project output. For more information please see
979
# http://doc.trolltech.com/qthelpproject.html#namespace
980

    
981
QHP_NAMESPACE          = org.doxygen.Project
982

    
983
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
984
# Qt Help Project output. For more information please see
985
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
986

    
987
QHP_VIRTUAL_FOLDER     = doc
988

    
989
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
990
# add. For more information please see
991
# http://doc.trolltech.com/qthelpproject.html#custom-filters
992

    
993
QHP_CUST_FILTER_NAME   =
994

    
995
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
996
# custom filter to add. For more information please see
997
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
998
# Qt Help Project / Custom Filters</a>.
999

    
1000
QHP_CUST_FILTER_ATTRS  =
1001

    
1002
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1003
# project's
1004
# filter section matches.
1005
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1006
# Qt Help Project / Filter Attributes</a>.
1007

    
1008
QHP_SECT_FILTER_ATTRS  =
1009

    
1010
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1011
# be used to specify the location of Qt's qhelpgenerator.
1012
# If non-empty doxygen will try to run qhelpgenerator on the generated
1013
# .qhp file.
1014

    
1015
QHG_LOCATION           =
1016

    
1017
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1018
#  will be generated, which together with the HTML files, form an Eclipse help
1019
# plugin. To install this plugin and make it available under the help contents
1020
# menu in Eclipse, the contents of the directory containing the HTML and XML
1021
# files needs to be copied into the plugins directory of eclipse. The name of
1022
# the directory within the plugins directory should be the same as
1023
# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1024
# the help appears.
1025

    
1026
GENERATE_ECLIPSEHELP   = NO
1027

    
1028
# A unique identifier for the eclipse help plugin. When installing the plugin
1029
# the directory name containing the HTML and XML files should also have
1030
# this name.
1031

    
1032
ECLIPSE_DOC_ID         = org.doxygen.Project
1033

    
1034
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
1035
# top of each HTML page. The value NO (the default) enables the index and
1036
# the value YES disables it.
1037

    
1038
DISABLE_INDEX          = NO
1039

    
1040
# This tag can be used to set the number of enum values (range [0,1..20])
1041
# that doxygen will group on one line in the generated HTML documentation.
1042
# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
1043

    
1044
ENUM_VALUES_PER_LINE   = 4
1045

    
1046
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1047
# structure should be generated to display hierarchical information.
1048
# If the tag value is set to YES, a side panel will be generated
1049
# containing a tree-like index structure (just like the one that
1050
# is generated for HTML Help). For this to work a browser that supports
1051
# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1052
# Windows users are probably better off using the HTML help feature.
1053

    
1054
GENERATE_TREEVIEW      = NO
1055

    
1056
# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1057
# and Class Hierarchy pages using a tree view instead of an ordered list.
1058

    
1059
USE_INLINE_TREES       = NO
1060

    
1061
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1062
# used to set the initial width (in pixels) of the frame in which the tree
1063
# is shown.
1064

    
1065
TREEVIEW_WIDTH         = 250
1066

    
1067
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1068
# links to external symbols imported via tag files in a separate window.
1069

    
1070
EXT_LINKS_IN_WINDOW    = NO
1071

    
1072
# Use this tag to change the font size of Latex formulas included
1073
# as images in the HTML documentation. The default is 10. Note that
1074
# when you change the font size after a successful doxygen run you need
1075
# to manually remove any form_*.png images from the HTML output directory
1076
# to force them to be regenerated.
1077

    
1078
FORMULA_FONTSIZE       = 10
1079

    
1080
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1081
# generated for formulas are transparent PNGs. Transparent PNGs are
1082
# not supported properly for IE 6.0, but are supported on all modern browsers.
1083
# Note that when changing this option you need to delete any form_*.png files
1084
# in the HTML output before the changes have effect.
1085

    
1086
FORMULA_TRANSPARENT    = YES
1087

    
1088
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1089
# (see http://www.mathjax.org) which uses client side Javascript for the
1090
# rendering instead of using prerendered bitmaps. Use this if you do not
1091
# have LaTeX installed or if you want to formulas look prettier in the HTML
1092
# output. When enabled you also need to install MathJax separately and
1093
# configure the path to it using the MATHJAX_RELPATH option.
1094

    
1095
USE_MATHJAX            = NO
1096

    
1097
# When MathJax is enabled you need to specify the location relative to the
1098
# HTML output directory using the MATHJAX_RELPATH option. The destination
1099
# directory should contain the MathJax.js script. For instance, if the mathjax
1100
# directory is located at the same level as the HTML output directory, then
1101
# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
1102
# MathJax, but it is strongly recommended to install a local copy of MathJax
1103
# before deployment.
1104

    
1105
MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
1106

    
1107
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1108
# for the HTML output. The underlying search engine uses javascript
1109
# and DHTML and should work on any modern browser. Note that when using
1110
# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1111
# (GENERATE_DOCSET) there is already a search function so this one should
1112
# typically be disabled. For large projects the javascript based search engine
1113
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1114

    
1115
SEARCHENGINE           = NO
1116

    
1117
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1118
# implemented using a PHP enabled web server instead of at the web client
1119
# using Javascript. Doxygen will generate the search PHP script and index
1120
# file to put on the web server. The advantage of the server
1121
# based approach is that it scales better to large projects and allows
1122
# full text search. The disadvantages are that it is more difficult to setup
1123
# and does not have live searching capabilities.
1124

    
1125
SERVER_BASED_SEARCH    = NO
1126

    
1127
#---------------------------------------------------------------------------
1128
# configuration options related to the LaTeX output
1129
#---------------------------------------------------------------------------
1130

    
1131
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1132
# generate Latex output.
1133

    
1134
GENERATE_LATEX         = YES
1135

    
1136
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1137
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1138
# put in front of it. If left blank `latex' will be used as the default path.
1139

    
1140
LATEX_OUTPUT           = latex
1141

    
1142
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1143
# invoked. If left blank `latex' will be used as the default command name.
1144
# Note that when enabling USE_PDFLATEX this option is only used for
1145
# generating bitmaps for formulas in the HTML output, but not in the
1146
# Makefile that is written to the output directory.
1147

    
1148
LATEX_CMD_NAME         = latex
1149

    
1150
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1151
# generate index for LaTeX. If left blank `makeindex' will be used as the
1152
# default command name.
1153

    
1154
MAKEINDEX_CMD_NAME     = makeindex
1155

    
1156
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1157
# LaTeX documents. This may be useful for small projects and may help to
1158
# save some trees in general.
1159

    
1160
COMPACT_LATEX          = NO
1161

    
1162
# The PAPER_TYPE tag can be used to set the paper type that is used
1163
# by the printer. Possible values are: a4, letter, legal and
1164
# executive. If left blank a4wide will be used.
1165

    
1166
PAPER_TYPE             = a4
1167

    
1168
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1169
# packages that should be included in the LaTeX output.
1170

    
1171
EXTRA_PACKAGES         =
1172

    
1173
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1174
# the generated latex document. The header should contain everything until
1175
# the first chapter. If it is left blank doxygen will generate a
1176
# standard header. Notice: only use this tag if you know what you are doing!
1177

    
1178
LATEX_HEADER           =
1179

    
1180
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1181
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1182
# contain links (just like the HTML output) instead of page references
1183
# This makes the output suitable for online browsing using a pdf viewer.
1184

    
1185
PDF_HYPERLINKS         = YES
1186

    
1187
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1188
# plain latex in the generated Makefile. Set this option to YES to get a
1189
# higher quality PDF documentation.
1190

    
1191
USE_PDFLATEX           = YES
1192

    
1193
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1194
# command to the generated LaTeX files. This will instruct LaTeX to keep
1195
# running if errors occur, instead of asking the user for help.
1196
# This option is also used when generating formulas in HTML.
1197

    
1198
LATEX_BATCHMODE        = NO
1199

    
1200
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1201
# include the index chapters (such as File Index, Compound Index, etc.)
1202
# in the output.
1203

    
1204
LATEX_HIDE_INDICES     = NO
1205

    
1206
# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1207
# source code with syntax highlighting in the LaTeX output.
1208
# Note that which sources are shown also depends on other settings
1209
# such as SOURCE_BROWSER.
1210

    
1211
LATEX_SOURCE_CODE      = NO
1212

    
1213
#---------------------------------------------------------------------------
1214
# configuration options related to the RTF output
1215
#---------------------------------------------------------------------------
1216

    
1217
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1218
# The RTF output is optimized for Word 97 and may not look very pretty with
1219
# other RTF readers or editors.
1220

    
1221
GENERATE_RTF           = NO
1222

    
1223
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1224
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1225
# put in front of it. If left blank `rtf' will be used as the default path.
1226

    
1227
RTF_OUTPUT             = rtf
1228

    
1229
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1230
# RTF documents. This may be useful for small projects and may help to
1231
# save some trees in general.
1232

    
1233
COMPACT_RTF            = NO
1234

    
1235
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1236
# will contain hyperlink fields. The RTF file will
1237
# contain links (just like the HTML output) instead of page references.
1238
# This makes the output suitable for online browsing using WORD or other
1239
# programs which support those fields.
1240
# Note: wordpad (write) and others do not support links.
1241

    
1242
RTF_HYPERLINKS         = NO
1243

    
1244
# Load stylesheet definitions from file. Syntax is similar to doxygen's
1245
# config file, i.e. a series of assignments. You only have to provide
1246
# replacements, missing definitions are set to their default value.
1247

    
1248
RTF_STYLESHEET_FILE    =
1249

    
1250
# Set optional variables used in the generation of an rtf document.
1251
# Syntax is similar to doxygen's config file.
1252

    
1253
RTF_EXTENSIONS_FILE    =
1254

    
1255
#---------------------------------------------------------------------------
1256
# configuration options related to the man page output
1257
#---------------------------------------------------------------------------
1258

    
1259
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1260
# generate man pages
1261

    
1262
GENERATE_MAN           = NO
1263

    
1264
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1265
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1266
# put in front of it. If left blank `man' will be used as the default path.
1267

    
1268
MAN_OUTPUT             = man
1269

    
1270
# The MAN_EXTENSION tag determines the extension that is added to
1271
# the generated man pages (default is the subroutine's section .3)
1272

    
1273
MAN_EXTENSION          = .3
1274

    
1275
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1276
# then it will generate one additional man file for each entity
1277
# documented in the real man page(s). These additional files
1278
# only source the real man page, but without them the man command
1279
# would be unable to find the correct page. The default is NO.
1280

    
1281
MAN_LINKS              = NO
1282

    
1283
#---------------------------------------------------------------------------
1284
# configuration options related to the XML output
1285
#---------------------------------------------------------------------------
1286

    
1287
# If the GENERATE_XML tag is set to YES Doxygen will
1288
# generate an XML file that captures the structure of
1289
# the code including all documentation.
1290

    
1291
GENERATE_XML           = NO
1292

    
1293
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1294
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1295
# put in front of it. If left blank `xml' will be used as the default path.
1296

    
1297
XML_OUTPUT             = xml
1298

    
1299
# The XML_SCHEMA tag can be used to specify an XML schema,
1300
# which can be used by a validating XML parser to check the
1301
# syntax of the XML files.
1302

    
1303
XML_SCHEMA             =
1304

    
1305
# The XML_DTD tag can be used to specify an XML DTD,
1306
# which can be used by a validating XML parser to check the
1307
# syntax of the XML files.
1308

    
1309
XML_DTD                =
1310

    
1311
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1312
# dump the program listings (including syntax highlighting
1313
# and cross-referencing information) to the XML output. Note that
1314
# enabling this will significantly increase the size of the XML output.
1315

    
1316
XML_PROGRAMLISTING     = YES
1317

    
1318
#---------------------------------------------------------------------------
1319
# configuration options for the AutoGen Definitions output
1320
#---------------------------------------------------------------------------
1321

    
1322
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1323
# generate an AutoGen Definitions (see autogen.sf.net) file
1324
# that captures the structure of the code including all
1325
# documentation. Note that this feature is still experimental
1326
# and incomplete at the moment.
1327

    
1328
GENERATE_AUTOGEN_DEF   = NO
1329

    
1330
#---------------------------------------------------------------------------
1331
# configuration options related to the Perl module output
1332
#---------------------------------------------------------------------------
1333

    
1334
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1335
# generate a Perl module file that captures the structure of
1336
# the code including all documentation. Note that this
1337
# feature is still experimental and incomplete at the
1338
# moment.
1339

    
1340
GENERATE_PERLMOD       = NO
1341

    
1342
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1343
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1344
# to generate PDF and DVI output from the Perl module output.
1345

    
1346
PERLMOD_LATEX          = NO
1347

    
1348
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1349
# nicely formatted so it can be parsed by a human reader.
1350
# This is useful
1351
# if you want to understand what is going on.
1352
# On the other hand, if this
1353
# tag is set to NO the size of the Perl module output will be much smaller
1354
# and Perl will parse it just the same.
1355

    
1356
PERLMOD_PRETTY         = YES
1357

    
1358
# The names of the make variables in the generated doxyrules.make file
1359
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1360
# This is useful so different doxyrules.make files included by the same
1361
# Makefile don't overwrite each other's variables.
1362

    
1363
PERLMOD_MAKEVAR_PREFIX =
1364

    
1365
#---------------------------------------------------------------------------
1366
# Configuration options related to the preprocessor
1367
#---------------------------------------------------------------------------
1368

    
1369
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1370
# evaluate all C-preprocessor directives found in the sources and include
1371
# files.
1372

    
1373
ENABLE_PREPROCESSING   = YES
1374

    
1375
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1376
# names in the source code. If set to NO (the default) only conditional
1377
# compilation will be performed. Macro expansion can be done in a controlled
1378
# way by setting EXPAND_ONLY_PREDEF to YES.
1379

    
1380
MACRO_EXPANSION        = NO
1381

    
1382
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1383
# then the macro expansion is limited to the macros specified with the
1384
# PREDEFINED and EXPAND_AS_DEFINED tags.
1385

    
1386
EXPAND_ONLY_PREDEF     = NO
1387

    
1388
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1389
# in the INCLUDE_PATH (see below) will be search if a #include is found.
1390

    
1391
SEARCH_INCLUDES        = YES
1392

    
1393
# The INCLUDE_PATH tag can be used to specify one or more directories that
1394
# contain include files that are not input files but should be processed by
1395
# the preprocessor.
1396

    
1397
INCLUDE_PATH           =
1398

    
1399
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1400
# patterns (like *.h and *.hpp) to filter out the header-files in the
1401
# directories. If left blank, the patterns specified with FILE_PATTERNS will
1402
# be used.
1403

    
1404
INCLUDE_FILE_PATTERNS  =
1405

    
1406
# The PREDEFINED tag can be used to specify one or more macro names that
1407
# are defined before the preprocessor is started (similar to the -D option of
1408
# gcc). The argument of the tag is a list of macros of the form: name
1409
# or name=definition (no spaces). If the definition and the = are
1410
# omitted =1 is assumed. To prevent a macro definition from being
1411
# undefined via #undef or recursively expanded use the := operator
1412
# instead of the = operator.
1413

    
1414
PREDEFINED             =
1415

    
1416
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1417
# this tag can be used to specify a list of macro names that should be expanded.
1418
# The macro definition that is found in the sources will be used.
1419
# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
1420

    
1421
EXPAND_AS_DEFINED      =
1422

    
1423
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1424
# doxygen's preprocessor will remove all references to function-like macros
1425
# that are alone on a line, have an all uppercase name, and do not end with a
1426
# semicolon, because these will confuse the parser if not removed.
1427

    
1428
SKIP_FUNCTION_MACROS   = YES
1429

    
1430
#---------------------------------------------------------------------------
1431
# Configuration::additions related to external references
1432
#---------------------------------------------------------------------------
1433

    
1434
# The TAGFILES option can be used to specify one or more tagfiles.
1435
# Optionally an initial location of the external documentation
1436
# can be added for each tagfile. The format of a tag file without
1437
# this location is as follows:
1438
#
1439
# TAGFILES = file1 file2 ...
1440
# Adding location for the tag files is done as follows:
1441
#
1442
# TAGFILES = file1=loc1 "file2 = loc2" ...
1443
# where "loc1" and "loc2" can be relative or absolute paths or
1444
# URLs. If a location is present for each tag, the installdox tool
1445
# does not have to be run to correct the links.
1446
# Note that each tag file must have a unique name
1447
# (where the name does NOT include the path)
1448
# If a tag file is not located in the directory in which doxygen
1449
# is run, you must also specify the path to the tagfile here.
1450

    
1451
TAGFILES               =
1452

    
1453
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1454
# a tag file that is based on the input files it reads.
1455

    
1456
GENERATE_TAGFILE       =
1457

    
1458
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1459
# in the class index. If set to NO only the inherited external classes
1460
# will be listed.
1461

    
1462
ALLEXTERNALS           = NO
1463

    
1464
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1465
# in the modules index. If set to NO, only the current project's groups will
1466
# be listed.
1467

    
1468
EXTERNAL_GROUPS        = YES
1469

    
1470
# The PERL_PATH should be the absolute path and name of the perl script
1471
# interpreter (i.e. the result of `which perl').
1472

    
1473
PERL_PATH              = /usr/bin/perl
1474

    
1475
#---------------------------------------------------------------------------
1476
# Configuration options related to the dot tool
1477
#---------------------------------------------------------------------------
1478

    
1479
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1480
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1481
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1482
# this option also works with HAVE_DOT disabled, but it is recommended to
1483
# install and use dot, since it yields more powerful graphs.
1484

    
1485
CLASS_DIAGRAMS         = YES
1486

    
1487
# You can define message sequence charts within doxygen comments using the \msc
1488
# command. Doxygen will then run the mscgen tool (see
1489
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1490
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1491
# the mscgen tool resides. If left empty the tool is assumed to be found in the
1492
# default search path.
1493

    
1494
MSCGEN_PATH            =
1495

    
1496
# If set to YES, the inheritance and collaboration graphs will hide
1497
# inheritance and usage relations if the target is undocumented
1498
# or is not a class.
1499

    
1500
HIDE_UNDOC_RELATIONS   = YES
1501

    
1502
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1503
# available from the path. This tool is part of Graphviz, a graph visualization
1504
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1505
# have no effect if this option is set to NO (the default)
1506

    
1507
HAVE_DOT               = NO
1508

    
1509
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1510
# allowed to run in parallel. When set to 0 (the default) doxygen will
1511
# base this on the number of processors available in the system. You can set it
1512
# explicitly to a value larger than 0 to get control over the balance
1513
# between CPU load and processing speed.
1514

    
1515
DOT_NUM_THREADS        = 0
1516

    
1517
# By default doxygen will write a font called Helvetica to the output
1518
# directory and reference it in all dot files that doxygen generates.
1519
# When you want a differently looking font you can specify the font name
1520
# using DOT_FONTNAME. You need to make sure dot is able to find the font,
1521
# which can be done by putting it in a standard location or by setting the
1522
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1523
# containing the font.
1524

    
1525
DOT_FONTNAME           = Helvetica
1526

    
1527
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1528
# The default size is 10pt.
1529

    
1530
DOT_FONTSIZE           = 10
1531

    
1532
# By default doxygen will tell dot to use the output directory to look for the
1533
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1534
# different font using DOT_FONTNAME you can set the path where dot
1535
# can find it using this tag.
1536

    
1537
DOT_FONTPATH           =
1538

    
1539
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1540
# will generate a graph for each documented class showing the direct and
1541
# indirect inheritance relations. Setting this tag to YES will force the
1542
# the CLASS_DIAGRAMS tag to NO.
1543

    
1544
CLASS_GRAPH            = YES
1545

    
1546
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1547
# will generate a graph for each documented class showing the direct and
1548
# indirect implementation dependencies (inheritance, containment, and
1549
# class references variables) of the class with other documented classes.
1550

    
1551
COLLABORATION_GRAPH    = YES
1552

    
1553
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1554
# will generate a graph for groups, showing the direct groups dependencies
1555

    
1556
GROUP_GRAPHS           = YES
1557

    
1558
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1559
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1560
# Language.
1561

    
1562
UML_LOOK               = NO
1563

    
1564
# If set to YES, the inheritance and collaboration graphs will show the
1565
# relations between templates and their instances.
1566

    
1567
TEMPLATE_RELATIONS     = NO
1568

    
1569
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1570
# tags are set to YES then doxygen will generate a graph for each documented
1571
# file showing the direct and indirect include dependencies of the file with
1572
# other documented files.
1573

    
1574
INCLUDE_GRAPH          = YES
1575

    
1576
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1577
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1578
# documented header file showing the documented files that directly or
1579
# indirectly include this file.
1580

    
1581
INCLUDED_BY_GRAPH      = YES
1582

    
1583
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1584
# doxygen will generate a call dependency graph for every global function
1585
# or class method. Note that enabling this option will significantly increase
1586
# the time of a run. So in most cases it will be better to enable call graphs
1587
# for selected functions only using the \callgraph command.
1588

    
1589
CALL_GRAPH             = NO
1590

    
1591
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1592
# doxygen will generate a caller dependency graph for every global function
1593
# or class method. Note that enabling this option will significantly increase
1594
# the time of a run. So in most cases it will be better to enable caller
1595
# graphs for selected functions only using the \callergraph command.
1596

    
1597
CALLER_GRAPH           = NO
1598

    
1599
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1600
# will generate a graphical hierarchy of all classes instead of a textual one.
1601

    
1602
GRAPHICAL_HIERARCHY    = YES
1603

    
1604
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1605
# then doxygen will show the dependencies a directory has on other directories
1606
# in a graphical way. The dependency relations are determined by the #include
1607
# relations between the files in the directories.
1608

    
1609
DIRECTORY_GRAPH        = YES
1610

    
1611
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1612
# generated by dot. Possible values are png, svg, gif or svg.
1613
# If left blank png will be used.
1614

    
1615
DOT_IMAGE_FORMAT       = png
1616

    
1617
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1618
# found. If left blank, it is assumed the dot tool can be found in the path.
1619

    
1620
DOT_PATH               =
1621

    
1622
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1623
# contain dot files that are included in the documentation (see the
1624
# \dotfile command).
1625

    
1626
DOTFILE_DIRS           =
1627

    
1628
# The MSCFILE_DIRS tag can be used to specify one or more directories that
1629
# contain msc files that are included in the documentation (see the
1630
# \mscfile command).
1631

    
1632
MSCFILE_DIRS           =
1633

    
1634
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1635
# nodes that will be shown in the graph. If the number of nodes in a graph
1636
# becomes larger than this value, doxygen will truncate the graph, which is
1637
# visualized by representing a node as a red box. Note that doxygen if the
1638
# number of direct children of the root node in a graph is already larger than
1639
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1640
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1641

    
1642
DOT_GRAPH_MAX_NODES    = 50
1643

    
1644
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1645
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1646
# from the root by following a path via at most 3 edges will be shown. Nodes
1647
# that lay further from the root node will be omitted. Note that setting this
1648
# option to 1 or 2 may greatly reduce the computation time needed for large
1649
# code bases. Also note that the size of a graph can be further restricted by
1650
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1651

    
1652
MAX_DOT_GRAPH_DEPTH    = 0
1653

    
1654
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1655
# background. This is disabled by default, because dot on Windows does not
1656
# seem to support this out of the box. Warning: Depending on the platform used,
1657
# enabling this option may lead to badly anti-aliased labels on the edges of
1658
# a graph (i.e. they become hard to read).
1659

    
1660
DOT_TRANSPARENT        = NO
1661

    
1662
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1663
# files in one run (i.e. multiple -o and -T options on the command line). This
1664
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1665
# support this, this feature is disabled by default.
1666

    
1667
DOT_MULTI_TARGETS      = YES
1668

    
1669
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1670
# generate a legend page explaining the meaning of the various boxes and
1671
# arrows in the dot generated graphs.
1672

    
1673
GENERATE_LEGEND        = YES
1674

    
1675
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1676
# remove the intermediate dot files that are used to generate
1677
# the various graphs.
1678

    
1679
DOT_CLEANUP            = YES