Project

General

Profile

Statistics
| Branch: | Revision:

scoutece @ d2d61ecc

Name Size
  bomboard
  breakfly
  charging
  diagnostic
  flyswatter
  lbr
  scoutfly
  smartfly
.gitignore 26 Bytes
test.txt 21 Bytes

Latest revisions

# Date Author Comment
d2d61ecc 10/22/2011 04:16 PM Yuyang Guo

Test commit

Created a new file for demonstration purposes.

6aece861 10/06/2011 05:28 PM Abraham Levkoy

Added kwoo's standalone charging schematic.

charging_test.sch is a standalone circuit schematic for a prototype to
test the charging circuit that will ultimately go on Scoutfly. kwoo
created it. It uses some new parts, but I don't know that much about it...

b68f4fd7 09/29/2011 10:13 PM Abraham Levkoy

Finished hooking up new gyroscope.

Connected pitch output of gyroscope to AVR and gave pitch an output LPF.
Added optional HPFs to both pitch and yaw outputs. We can just leave the
pads empty if we think they won't be useful.

To route the changes, had to squeeze some other stuff. Moved the AVR...

0075932e 09/17/2011 04:39 AM Abraham Levkoy

Routed new gyroscope.

Routed new gyroscope on board in Eagle.

64958645 09/17/2011 03:53 AM Abraham Levkoy

Swapped gyroscope part in schematic.

Replaced old gyroscope part with new one in schematic. Assuming that
pitch output or amplified outputs are undesired. Not using optional
high-pass filter on output. Have not yet routed connections to gyroscope
on board.

d4a38876 09/15/2011 05:30 AM Abraham Levkoy

Added Eagle part for new gyroscope.

Created symbol for new gyroscope (LPY5150AL). This part is sold by
Sparkfun but not in the Sparkfun Eagle library. Another part by the same
manufacturer with the same package is in the Sparkfun library. Copied
this package into kwoo.lbr and used it for the LPY5150AL part.

5dbaecb0 09/13/2011 11:06 PM Abraham Levkoy

Flipped FFC connector on PCB.

Flipped FFC connector (part J3) on Scoutfly so that mating side faces
out from edge of board. Rerouted wires connecting to J3 to accomodate
this. Because the connected ports don't line up as well as they used to,
the area below J3 has a lot of roundabout paths and layer switches. I...

d374c1a4 08/15/2011 01:56 AM Abraham Levkoy

Began fixing bugs for Scoutfly fixup.

Made several of the changes listed on wiki page ScoutflyUpdate2011. In
particular:
Removed R4 and connected pin 4 on U$3 directly to VCC.
Connected VREG_EN to VCC with 10 kOhm resistor (new R4).
Changed value of R26 to 100 kOhms....

79365002 01/17/2011 11:16 PM Christopher Mar

updated silkscreen with new version and date

68814b9c 01/17/2011 11:06 PM Christopher Mar

updated scoutfly and kwoo lbr with dual NPN

View all revisions | View revisions

Also available in: Atom